Resumen del contenido incluido en la página 1
e00_l8had_us_7.book Page 1 Wednesday, March 10, 2004 2:47 PM
Resumen del contenido incluido en la página 2
e00_l8had_us_7.book Page 1 Wednesday, March 10, 2004 2:47 PM PRECAUTION Declaration of Conformity CAUTION Model Number : DSR-300 RISK OF ELECTRIC SHOCK Trade Name : SANYO DO NOT OPEN Responsible party : SANYO FISHER COMPANY CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT Address : 21605 Plummer Street, REMOVE COVER (OR BACK). Chatsworth, California 91311 NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Telephone No. : (818) 998-7322 This device compli
Resumen del contenido incluido en la página 3
e00_l8had_us_7.book Page 2 Wednesday, March 10, 2004 2:47 PM INTRODUCTION Main features Accessories This digital video recorder can be used to Check that you have all the parts below. store images recorded by monitoring cameras Power cord onto a removable HDD. AC adapter Supports removable HDDs This feature allows you to remove and store HDDs containing important recordings. * Do not use the AC adapter with other equipment. Complete range of recording/playback functions Ferrite core (2)
Resumen del contenido incluido en la página 4
e00_l8had_us_7.book Page 3 Wednesday, March 10, 2004 2:47 PM INTRODUCTION Symbols used in this manual Information describing operation methods or how to get the most out of functions. Information describing the correct use of the digital video recorder. (→P. xx) indicates the page to be referred to. Copyright This manual and software are copyrighted by Sanyo Electric Co., Ltd. Brand and product names used in this manual are the trademarks or registered trademarks of their respective co
Resumen del contenido incluido en la página 5
INTRODUCTION OPERATION SETTINGS INTERFACE NETWORK NETWORK NETWORK SPECIFICATIONS CONTROL SETTINGS OPERATION e00_l8had_us_7.book Page 4 Wednesday, March 10, 2004 2:47 PM CONTENTS INTRODUCTION 1 BEFORE USE .................................................8 2 REPLACING A REMOVABLE HDD ............ 10 Notes on handling removable HDDs ...............8 Replacement ................................................ 10 Conditions to avoid .........................................8 Removal ............
Resumen del contenido incluido en la página 6
e00_l8had_us_7.book Page 5 Wednesday, March 10, 2004 2:47 PM CONTENTS SETTINGS MENU CONFIGURATION AND SETTINGS OPERATIONS ..............................................42 1 DISPLAY/VIDEO LOSS SET ....................... 68 Displaying menu screens and setting screens .........................................................42 and
Resumen del contenido incluido en la página 7
INTRODUCTION OPERATION SETTINGS INTERFACE NETWORK NETWORK NETWORK SPECIFICATIONS CONTROL SETTINGS OPERATION e00_l8had_us_7.book Page 6 Wednesday, March 10, 2004 2:47 PM CONTENTS INTERFACE SPECIFICATIONS 1 INTERFACE SPECIFICATIONS (when optional interface board is installed) .....81 RS-232C .......................................................81 RS-485 ..........................................................81 Setting the RS-485 termination switch ..........82 Commands ..................
Resumen del contenido incluido en la página 8
e00_l8had_us_7.book Page 7 Wednesday, March 10, 2004 2:47 PM CONTENTS NETWORK OPERATION 1 RECORDING IMAGES 4 OPERATIONS IN SEARCH MODES (when optional interface board is installed) .....112 (when optional interface board is installed)..... 119 Normal recording ........................................112 1. ALARM SEARCH ................................... 119 Timer recording ...........................................112 2. ALARM THUMBNAIL SEARCH ............. 119 Alarm recording ............
Resumen del contenido incluido en la página 9
INTRODUCTION e00_l8had_us_7.book Page 8 Wednesday, March 10, 2004 2:47 PM 1 BEFORE USE If the HDD becomes damaged, handle the unit and the Notes on handling removable HDDs damaged HDD that has been removed in order for it to be This unit uses removable hard disk drives (HDD). replaced carefully to prevent the problem from being Be sure to observe the following points carefully when aggravated until as the nature of the problem can be operating, setting-up and servicing the unit. checked
Resumen del contenido incluido en la página 10
e00_l8had_us_7.book Page 9 Wednesday, March 10, 2004 2:47 PM 1 BEFORE USE Hard disk protection The hard disk is checked automatically at power ON. If a hard disk problem is found, the CHANGE DISK indicator flashes. To initialize the disk or save images stored on the disk, contact a Sanyo service centre. Care To clean the digital video recorder, unplug the power plug from the wall outlet and wipe the unit lightly with a soft cloth. To remove heavy grime, wipe the digital video recorder
Resumen del contenido incluido en la página 11
INTRODUCTION e05_l8had_us_7.fm Page 10 Thursday, March 11, 2004 3:03 PM 2 REPLACING A REMOVABLE HDD A separately-sold hard disk tray (VA-DT300) can be 2 Assemble and tighten the 4 screws. installed to facilitate easier storage and replacement. When replacing with a HDD used in a DSR-300; Of the menu settings, only the recording area settings and the overwrite on/off setting are used for the HDD. When replacing with a HDD used in a DVR other than a DSR-300; It is treated as a new HDD. The
Resumen del contenido incluido en la página 12
e00_l8had_us_7.book Page 11 Wednesday, March 10, 2004 2:47 PM 2 REPLACING A REMOVABLE HDD 5 Insert the tray release key, turn it in the Removal direction of the arrow, and then press the [CHANGE DISK] button. 1 With the power turned on, press and hold the [CHANGE DISK] button for at The HDD indicator will light up and the CHANGE DISK least 2 seconds. indicator will switch from green to red. The CHANGE DISK indicator changes from red to flashing green, then lights steadily after 10 seco
Resumen del contenido incluido en la página 13
INTRODUCTION e00_l8had_us_7.book Page 12 Wednesday, March 10, 2004 2:47 PM 2 REPLACING A REMOVABLE HDD 3 Pull the HDD tray out using the handle. Pulling the handle causes the HDD tray lock to be released. 4 Pull the clasp, release the lock, and remove the cover. 5 Remove the 4 screws, take the removable HDD out of the tray, and release the connector. Whenever the unit is to be transported, ensure that the HDD tray is removed from the unit and packaged separately. 12 English
Resumen del contenido incluido en la página 14
e00_l8had_us_7.book Page 13 Wednesday, March 10, 2004 2:47 PM 3 NAMES AND FUNCTIONS OF PARTS Front panel 12 3 4 59 6 78 10 11 12 13 14 1516 17 18 19 20 21 22 23 24 1. [STILL] button 11. [ALARM] button ( P. 30) Pauses the screen image when pressed during playback. When the [ ] or [ ] button is pressed during Pressing the button again restarts playback. playback, the unit skips to the next earlier or later alarm. 2. [PLAY/STOP] button and indicator 12. [SEARCH] button ( P. 29) Plays back the
Resumen del contenido incluido en la página 15
INTRODUCTION e00_l8had_us_7.book Page 14 Wednesday, March 10, 2004 2:47 PM 3 NAMES AND FUNCTIONS OF PARTS 17. [ ] button Used to move the cursor in menu screens up. Also used to change setting values. Used for frame advance (forward) and adjusting the CUE/ REVIEW speed. 18. [CUE/ENTER] button When pressed during playback, lets you fast-forward the image while watching it on-screen. When pressed while the image is still, forward playback is performed. Also used for menu screen operations.
Resumen del contenido incluido en la página 16
e05_l8had_us_7.fm Page 15 Friday, March 12, 2004 9:46 AM 3 NAMES AND FUNCTIONS OF PARTS Rear panel 12 3 456 7 RS485 LAN RS232C A RS485 B TERMINATE OFF ON AUDIO VIDEO DC IN IN OUT IN LOOP OUT OUT ALL RESET ALARM NON-REC CLOCK WARNING ALARM SERIES SW REMOTE COM IN RESET OUT OUT COM IN OUT OUT FULL FULL COM IN OUT OUT COM 8 9 10 11 12 13 14 15 16 17 1. Fan 15. VIDEO OUT terminal 2. RS-232C terminal (when option board is installed) 16. Control and alarm terminals 3. RS-485 terminal A (when opti
Resumen del contenido incluido en la página 17
INTRODUCTION e00_l8had_us_7.book Page 16 Wednesday, March 10, 2004 2:47 PM 4 INSTALLATION AND CONNECTIONS This section describes how to connect the digital video recorder to the CCTV camera and other devices. Be sure to read the instruction manuals for each connected device. Improper connections can cause smoke or malfunctions. Basic connections The connections for the camera, TV monitor, system controller, multiplexer, microphone, and PC are shown below. Multiplexer (sold separately) System
Resumen del contenido incluido en la página 18
e00_l8had_us_7.book Page 17 Wednesday, March 10, 2004 2:47 PM 4 INSTALLATION AND CONNECTIONS Connecting a multiplexer RS232C A RS485 B RS485 LAN TERMINATE OFF ON Monitor (sold separately) AUDIO VIDEO DC IN OUT IN OUT IN LOOP OUT ALL Analog Analog RESET input output ALARM NON-REC CLOCK WARNING ALARM SERIES SW REMOTE COM IN RESET OUT OUT COM IN OUT OUT FULL FULL COM IN OUT OUT COM Multiplexer (sold separately) Alarm input terminal Alarm output terminal Ground (C) Switch input terminal Switc
Resumen del contenido incluido en la página 19
INTRODUCTION e00_l8had_us_7.book Page 18 Wednesday, March 10, 2004 2:47 PM 4 INSTALLATION AND CONNECTIONS Connecting the power cord If the CHANGE DISK indicator is flashing in red 1 When you have finished making all the The digital video recorder has a self-check function that other connections, insert the power indicates problems. If there is a problem at power ON or plug into the wall outlet. during operation, the type of problem is indicated by how rapidly the CHANGE DISK indicator f
Resumen del contenido incluido en la página 20
e00_l8had_us_7.book Page 19 Wednesday, March 10, 2004 2:47 PM 1 PREPARING FOR USE (5) Alarm display and alarm count display ( P. 24) Operation display area When you set an alarm using the “ALARM REC MODE SET” menu item, the alarm display area displays the Whenever the power is turned ON, the operation display following information. area will be displayed at the top left of the monitor screen. When alarm recording is set; This area indicates the date and time, the image quality, “ALARM”
