Resumen del contenido incluido en la página 1
®
AVerMedia
+
AVerDiGi EB1304 MPEG4
Operation Manual
Resumen del contenido incluido en la página 2
FCC NOTICE (Class A) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Federal Communications Commission Statement NOTE- This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits
Resumen del contenido incluido en la página 3
WARNING TO REDUCE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE CAUTION IF THERE IS ANY DAMAGE, SHORTAGE OR INAPPROPRIATE ITEM IN THE PACKAGE, PLEASE CONTACT WITH YOUR LOCAL DEALER. WARRANTY VOID FOR ANY UNAUTHORIZED PRODUCT MODIFICATION
Resumen del contenido incluido en la página 4
Table of Contents Chapter 1 Introduction......................................................................1 1.1 Package Content........................................................................................2 1.2 Features and Specifications.......................................................................2 1.3 Front Panel ................................................................................................3 1.4 Back Panel..........................................
Resumen del contenido incluido en la página 5
Chapter 1 Introduction + EB1304 MPEG4 is a 4-channel stand-alone DVR unit that provides real-time monitoring and digital recording of surveillance video. Up to four video cameras and four sensor devices can be hooked up to this DVR unit. It is also equipped with an output relay that allows connection of an alarm device. Surveillance, digital recording and playback are controlled through the front panel buttons. With the On-Screen-Display (OSD) menu, user can customize video recording sett
Resumen del contenido incluido en la página 6
1.1 Package Content (1) (2) (3) (5) (4) (6) (7) (8) + (1) AVerDiGi EB1304 MPEG4 unit (2) Remote Control (batteries included) (3) Quick Installation Guide (4) Power Cord * The power cord varies depending on the standard power outlet of the country where it is sold. (5) Power Adapter (6) DVR accessories (including 4 screws) (7) Software CD (User Manual included) (8) USB Cable 1.2 Features and Specifications Non-PC stand-alone security dig
Resumen del contenido incluido en la página 7
MPEG4 video compression Auto-detect NTSC or PAL video system Supports 1 hard disk drive (not included) Full-screen resolution: Display: 720 x 480 (NTSC), 720 x 576 (PAL) Recording: 720 x 480 (NTSC), 720 x 576 (PAL) Display and recording frame rate: D1 mode: 60/50fps(NTSC/PAL) CIF mode: 120/100 fps (NTSC/PAL) Scheduled recording (00:00~23:00 set by hour ) Search for recorded videos by date/time/event Input/Output: 4 sensor inputs and 1 relay output control Multiple
Resumen del contenido incluido en la página 8
1.4 Back Panel Name Function (1) Audio Out : Output the audio signal to a speaker (2) Audio In : Input the audio signal from a microphone or audio output device. The audio is embedded with channel 1 (3) CH1 : Input the video camera signal and display it on channel 1 (4) CH2 : Input the video camera signal and display it on channel 2 (5) CH3 : Input the video camera signal and display it on channel 3 (6) CH4 : Input the video camera signal and display it on channel 4 (7) Video Out
Resumen del contenido incluido en la página 9
Follow the illustrated instructions below to install the hard disk: 1. Loosen all screws 2. Push the cover backward and lift 3. Loosen the hard disk rack 4 screws 4. Secure the brackets on the hard disk 5. Connect the end of the IDE cable 6. Secure the hard disk inside the unit and the power connector to the hard then replace unit cover disk 5
Resumen del contenido incluido en la página 10
7. Push the cover forward 8. Secure the cover 9. You may now connect all the cables. When the power is connected, the Power LED light turns on 6
Resumen del contenido incluido en la página 11
1.5.2 Connecting Devices The back panel of the DVR unit, you can connect up to 4 video cameras, 4 sensor devices, 1 alarm device and output video to a TV or CRT/LCD monitor. Connecting the unit to a PC, through USB connection, the bundled software enables you to transfer, playback and segment the video. Follow the illustration below to make the connection: Microphone CRT/LCD Monitor - The DVR unit support 2 video output ports and you can only select ONE to output the video either from
Resumen del contenido incluido en la página 12
1.5.3 Connecting the Sensor/Relay device The Sensor and Alarm ports enable you to connect (4) sensor inputs and (1) relay outputs. Just connect the external sensor and relay pin directly to the pinhole. Check the table below and locate which pinhole is assigned to sensor input and relay output. 1.5.3.1 I/O Card Sensor and Relay pinhole allocation: The signal from the sensor (i.e., infrared sensors, smoke detectors, proximity sensors, door sensors, etc.) is being transmitted to the u
Resumen del contenido incluido en la página 13
+ Chapter 2 Operating the EB1304 MPEG4 + 2.1 Using the EB1304 MPEG4 for the First Time Upon connecting the power, the unit automatically detects the status of the hard + disk. The hard disk must be formatted before you can use it with EB1304 MPEG4 . If you are prompt to format the hard disk, press (select) for YES to format the hard disk and (menu) for NO to remain unchanged. HARD DISKS INFORMATION VERSION 1 . 2. 10 HDD CHECKING . . . HDD SIZE 76GB 509MB HDD FORMA
Resumen del contenido incluido en la página 14
Full Screen Preview 4-Channel Preview When you are in full screen preview, press the following buttons on the remote control to switch to different channel, or preview all 4 channels: CH1: Camera1 QUAD: 4-Channel CH2: Camera 2 CH3: Camera 3 CH4: Camera 4 2.3 Playback the Video If the unit is recording the video, you may have to stop video recording in order to do video playback. To stop video recording, press . 2.3.1 To Playback Video SEARCH METHOD 1. Press TIME SEARC
Resumen del contenido incluido en la página 15
time. Then press or again to make the selection. 3. To start video playback, the time in second must be set. Use the or buttons to move the selection to the left most. Use the and or and buttons and select the time in second. Then press or . EVENT LIST (search by condition): EVENT LIST S 2006 / 05 / 03 13 : 26 : 34 13 : 26 : 50 1. Use the and or and A 2006 / 05 / 03 13 : 00 : 01 13 : 16 : 46 A 2006 / 05 / 03 12 : 00 : 01 13 : 00 : 01 11 : 48 : 37 12 : 00 : 00 B 2006 / 05 /
Resumen del contenido incluido en la página 16
Chapter 3 OSD Navigation Tree MAIN MENU MAIN MENU RECORD SCHEDULE RECORD SCHEDULE RECORD SCHEDULE RECORD SCHEDULE CAMERA SELECT CAMERA SELECT 1 1 2 2 3 3 4 4 00 : 00 - 01 : 00 00 : 00 - 01 : 00 ALWAYS REC ALWAYS REC 13 : 00 - 14 : 00 13 : 00 - 14 : 00 ALWAYS REC ALWAYS REC RECORD SELECT RECORD SELECT 1 1 2 2 3 3 4 4 01 : 00 - 02 : 00 01 : 00 - 02 : 00 ALWAYS REC ALWAYS REC 14 : 00 - 15 : 00 14 : 00 - 15 : 00 ALWAYS REC ALWAYS REC RECORD MODE RECORD MODE D1 02 : 00 - 03 :
Resumen del contenido incluido en la página 17
3.1 Remote Control Function Use the Remote control to operate the OSD menu on surveillance screen. (11) (12) (1) (2) (3) (15) (13) (4) (14) (5) (8) (7) (10) (6) (9) Button Function To enter the OSD Main menu / Exit from the main menu or (1) sub-menu display (2) To go up and down and select the items in the menu list or change the settings (3) (4) Make a selection / Enter sub-menu (5) To go up and down and select the items in the menu list or change the settings (6) (7)
Resumen del contenido incluido en la página 18
3.2 Menu Function If the unit is currently recording the video, user may have to stop video recording to change the settings. Use remote control to navigate in the OSD menu. The red frame turns yellow when you are making a selection. OSD MENU Description MAIN MENU CAMERA SELECT : CAMERA SELECT 1 2 3 4 RECORD SELECT 1 2 3 4 Enable/disable the channel number to display the video RECORD MODE D1 on the surveillance screen VIDEO FORMAT MPEG4 RECORD FRAMERATE 10 RECORD SELECT
Resumen del contenido incluido en la página 19
OSD MENU Description RECORD SCHEDULE RECORD SCHEDULE: 00 : 00 - 01 : 00 ALWAYS REC 01 : 00 - 02 : 00 ALWAYS REC By default, in 24 hours, the recording schedule is set to 02 : 00 - 03 : 00 ALWAYS REC always record every hour. Refer to the table below to 03 : 00 - 04 : 00 ALWAYS REC 04 : 00 - 05 : 00 ALWAYS REC customize the recoding condition 05 : 00 - 06 : 00 ALWAYS REC 06 : 00 - 07 : 00 ALWAYS REC Condition Description 07 : 00 - 08 : 00 ALWAYS REC 08 : 00 - 09 : 00 ALWAYS REC 09 : 00
Resumen del contenido incluido en la página 20
OSD MENU Description SUBMENU PASSWORD SETUP : PASSWORD CHANGE VIDEO ADJUSTMENT Enable/disable full system password protection. This DATE 2006 / 04 / 20 would prevent unauthorized user to stop video TIME 17 : 54 : 50 AUTO RECORD ON recording, change system settings and formatting the AUTO SCAN ON hard disk PASSWORD SETUP NO AUDIO RECORD ON AUDIO RECORD : AUDIO MUTE OFF AUDIO SYSTEM PAL COLOR STABILITY OFF Enable/disable audio recording. To record sound, make sure the m
