Resumen del contenido incluido en la página 1
EZVR4/8 DVR
SATA HDD
User’s Manual
Speco Technologies
200 New Highway
Amityville, NY 11701
800-645-5516
www.specotech.com
Resumen del contenido incluido en la página 2
2
Resumen del contenido incluido en la página 3
Safety Precautions CAUTION RISK OF ELECTRICAL SHOCK. DO NOT OPEN ! CAUTION: TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT REMOVE COVER (OR BACK), NO USER SERVICEABLE PARTS REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of insulated dangerous Voltage within the product’s enclosure that may be of
Resumen del contenido incluido en la página 4
About this document Before installing the unit, be sure to thoroughly review and follow the instructions in this User’s Manual. Pay particular attention to the parts that are marked NOTICE. When connecting with external application, first turn the power OFF and follow manual instructions for appropriate installation. Before reading this document 1. This manual contains information for configuring, managing and using the EZVR DVR. 2. To prevent fire or electrical shock, do not
Resumen del contenido incluido en la página 5
FCC Statement: WARNING This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received including interference that may cause undesired operation." * Federal Communications Commission (FCC) Statement WARNING This Equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of th
Resumen del contenido incluido en la página 6
MADE IN A WA T I N ODEL NO.: M R . SE NO: M D A EINTAIWAN D L O MO E N .: SER NO.: INSTALLATION 1. The package 2. Un-packed 3. Take the unit out from the package 4. Put on a flat desk 5. Connect your camera cables to the BNC 6. Connect your monitor cable to the BNC connectors on the rear. connector labeled “Monitor” on the rear. 7. Connect the power adaptor. 8. Turn on the “Power” switch after the cameras are installed. The EZVR will then “boot” up and begin recording.
Resumen del contenido incluido en la página 7
FRONT PANEL KEYPAD Please operate the keypad function according to the DVR model that you purchased Screen mode EZVR4 1. : Quad screen mode button 2. CHANNEL 1 : Channel 1 full screen button 3. CHANNEL 2 : Channel 2 full screen button 4. CHANNEL 3 : Channel 3 full screen button 5. CHANNEL 4 : Channel 4 full screen button Screen mode
Resumen del contenido incluido en la página 8
Record mode EZVR4 / EZVR8 1. 24H : 24 hour recording mode 2. 72H : 72 hour recording mode 3. 240H : 240 hour recording mode 4. 480H : 480 hour recording mode 5. 960H : 960 hour recording mode 6. REC : Press this button to start recording. Press again to stop. Miscellaneous
Resumen del contenido incluido en la página 9
REAR PANEL CONNECTOR Power cord in 12VDC / 5A, Power Switch (ON / OFF) EZVR4: Camera 1 ~ 4 input BNC type EZVR8: Camera 1 ~ 8 input BNC type Main monitor output x 2 Audio channel input x 4 and output x 2 – RCA Type Alarm / Relay / RS485 connector 9
Resumen del contenido incluido en la página 10
Booting Up Detecting the hard disk Live screen Indicator: Live: HDD installed Recording Overwrite Live mode Video loss Key lock Alarm Input Alarm Output Playback: Forward Reverse Pause 10
Resumen del contenido incluido en la página 11
Remote controller The keys on the remote control have the same functions as the front keyboard of the unit. User please operate according to the DVR model that you purchased 4CH 8CH 11
Resumen del contenido incluido en la página 12
Main MENU – Time Setup 1. Press ENTER to select Time Set. Press ENTER again to display the cursor. 2. Use the left or right buttons to select the item you wish to adjust, then press ENTER to change the value. 3. Press MENU to return to the previous screen and move the cursor to Apply. 4. Press ENTER to confirm. 5. Select On or Off for Daylight Savings Time. Once the time is initially set, changing the DST mode will adjust the time appropriately.
Resumen del contenido incluido en la página 13
Main MENU – Audio Record Use direction buttons to select Audio Record. Press ENTER to select On or Off. Diagram Speaker RCA RCA Cable Audio Out (Line Level) Microphone RCA Audio In (Line Level) Notice: 1. Audio channel input x 4 and output x 2 2. Audio is always on input 1 when DVR is on QUAD screen of live/playback mode 3. To hear audio input 1 ~ 4, please select full screen 1 ~ 4 on live/playback mode 4. When 960H is selected in the 8CH(EZVR8),
Resumen del contenido incluido en la página 14
Main MENU – Alarm Input Use direction buttons to select Alarm Input. Press the Enter button to choose the type of sensor input (Normally Open - NO or Normally Closed - NC). To disable the alarm mode switch to the Off position.. Main MENU – Alarm Output Use direction buttons to select Alarm Output. When switched to Off the alarm output is disabled. Press the Enter button to turn the output relay on or off. 14
Resumen del contenido incluido en la página 15
Alarm Input Door closed Door open The Alarm Signal type depends upon the Alarm Sensor polarity defined as NO (Normal Open) or NC (Normal Close). Alarm Output: Relay: NO + COM or NC + COM Relay: NO (Normal open) Alarm trigger Relay: NC (Normal Close) NO COM NC COM 15
Resumen del contenido incluido en la página 16
Main MENU – Auto Record Use direction buttons to select Auto Record. When Auto Record is set to On, the EZVR4/8 Press the Enter button to choose On or Off. will start recording again after 2 minutes of If switched to OFF then Auto Record is inactivity after being manually stopped. disabled. Main MENU – Overwrite HDD Use direction buttons to select Overwrite YES – Recording continues to overwrite the Enable. Press the Enter button to choose oldest information after the Hard Disk is
Resumen del contenido incluido en la página 17
Main MENU – Status Bar If set ON, the status bar will show date-time Use direction buttons to select Status Bar . and status icons . Then press ENTER to select ON or Off . If set Off the status bar will hide date-time and status icons . Main MENU – Language Use direction buttons to select Language. Press Enter button to choose a language. Supported Languages: English / French / Spanish 17
Resumen del contenido incluido en la página 18
Main MENU – Exit Use direction buttons to select Exit. Press Enter button to leave the menu. Playback mode – Note: Instructions appear on the screen after selecting “Search” Press SEARCH to enter the playback mode. Press ENTER to select a date and time. Use the left or right arrows to select the item Press MENU to return to the previous screen you wish to change, then press ENTER to and move cursor to Search. change the value 18
Resumen del contenido incluido en la página 19
Press ENTER to start the searching. Wait until the unit starts to playback. Backup mode Note: Plug in a USB device before starting the backup You must first playback an event using When the event you wish to backup appears instructions from the previous page. on the screen, press the BACKUP button to select the start time. Press the BACKUP button a second time to select the end of the copy. The unit will detect the USB drive and copy the data to the USB device. After the backup p
Resumen del contenido incluido en la página 20
Player Software Main Screen Please operate the player software according to the DVR model that you purchased Click icon to select the file to play. It will be in .vvf format 20
