Manual de instrucciones de Metra Electronics 95-8904B

Resumen del contenido incluido en la página 1

INSTALLATION INSTRUCTIONS FOR PART 95-8904B INSTALLATION INSTRUCTIONS FOR PART 95-8904B
APPLICATIONS
SUBARU
LEGACY & OUTBACK
2010
(non-NAV models)
95-8904B
KIT FEATURES
• DDIN radio provision
• ISO stacked provision
• Painted scratch resistant matte black
Note: Minor sub-dash modifications required. Part
# 95-8903B does not require these modifications.
KIT COMPONENTS
• A) DDIN Trim Plate • B) DDIN Brackets
A B
WIRING & ANTENNA CONNECTIONS (SOLD SEPARATELY)
• 70-8901 Subaru Harness 1990-UP

Resumen del contenido incluido en la página 2

95-8904B 95-8904B NOTES TABLE OF CONTENTS DASH DISASSEMBLY • 2010 SUBARU LEGACY/OUTBACK . . . . . . . . . 1 KIT ASSEMBLY • 2010 SUBARU LEGACY/OUTBACK • DDIN / STACKED ISO HEAD UNIT PROVISION. . 2 *NOTE: Refer Also to the instructions included with the aftermarket radio. KNOWLEDGE IS POWER Enhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry. Log onto www.installerinstitute.com or call 800-354-

Resumen del contenido incluido en la página 3

95-8904B DASH DISASSEMBLY 95-8904B NOTES 2010 SUBARU LEGACY / OUTBACK Disconnect the negative battery 1 A terminal to prevent an accidental short circuit. Unclip and remove the radio trim 2 panel including the a/c vents. (Fig. A) Remove (4) Phillips screws securing 3 the factory radio. Continue to Kit Assembly 1

Resumen del contenido incluido en la página 4

95-8904B KIT ASSEMBLY 95-8904B 2010 SUBARU LEGACY / OUTBACK NOTES DDIN / STACKED ISO HEAD UNIT PROVISION Locate the factory wiring harness 1 A in the dash. Metra recommends using the proper mating adapters from Metra and AXXESS to inte- grate your new radio. Re-connect the negative battery terminal and test the unit for proper operation. Attach the Double DIN brackets to 2 the Double DIN trim plate. (Fig. A) B Slide the Double DIN head unit or 3 stacked ISO head units into the brack