Resumen del contenido incluido en la página 1
4CH H.264 Multiplex DVR
User Manual
Resumen del contenido incluido en la página 2
This symbol is intended to alert the user to the presence of unprotected “Dangerous voltage" within the product's enclosure that may be strong enough to cause a risk of electric shock. This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
Resumen del contenido incluido en la página 3
All the safety and operating instructions must be read before the unit is operated. • Make sure to switch the power off before you install the DVR. • There is the danger of an electric shock if the DVR is opened by an unqualified service engineer or installer. • Avoid using the DVR outside of the reference temperature and humidity indicated in the specification. • Avoid exposing the DVR to violent movement or vibration. • Do not use or store the DVR in direct sunlight or near to
Resumen del contenido incluido en la página 4
TABLE OF CONTENTS Chapter 1 FEATURES .........................................................................................................1 Chapter 2 MAIN MENU OPERATION..................................................................................2 2.1 Quick Setup ............................................................................................................2 2.2 Network Remote Instructions............................................................................
Resumen del contenido incluido en la página 5
Chapter 1 FEATURES Two USB ports (for mouse usage and backup). Dual streaming enhances the speed of network transmission Built-in VGA output up to 1024x768 resolution Individual setup of resolution, frame rate and video quality for each channel Still image snapshot AVI converter with time stamp H.264 compression ideal for saving HDD space Real time live display Live display, record, backup, playback and network access simultaneously Picture-in-picture monitoring
Resumen del contenido incluido en la página 6
Chapter 2 MAIN MENU OPERATION 2.1 Quick Setup Graphic Icons Resting the cursor on this icon will bring up the four (Main Menu/ Search/ Backup/ PTZ) menu icons. MAIN MENU. SEARCH SETUP. BACKUP. PTZ CONTROL. Turn On/Off recording. PLAYBACK Resting the cursor on this icon will bring up five (PAUSE/ PIP/ ZOOM/ AUTO SEQ/ LOCK) display icons. PAUSE, to pause LIVE image PIP, picture in picture ZOOM, zoom in / out the screen size AUTO-sequence LOCK, activate t
Resumen del contenido incluido en la página 7
GUI Hints and Tips Recording is on Number represents the current selected LIVE audio channel Live Audio is off Motion detected on the channel Sensor triggered on the channel Video loss detected on the channel USB device detected DVR has been connected onto the Internet. AUTO-SEQ is on FREZZE is on, screen is frozen LOCK is on PTZ control is on Shows the current hard disk space used-up (99% means that the HDD 99% space h
Resumen del contenido incluido en la página 8
2.2 Network Remote Instructions Same user and DVR-site interface, the only difference is network toolbar which is situated on the lower bottom right. Icon Description Low Video Quality (LQ) / High Video Quality (HQ) * Please refet to 4.7.2 HTTP setup Full Screen / Record Capture Image Record and captured files storage path settings Open / Close this tool bar 4
Resumen del contenido incluido en la página 9
2.3 Playback Mode Playback – Quick Function Icon Press「 / 」button to Fast Rewind Speed : 2x, 4x, 8x, 16x, 32x, 64x Press「 / 」button to Fast Forward Speed : 2x, 4x, 8x, 16x, 32x, 64x Press「PLAY」/ 「 」button to Play/ Pause Playback / 「 / SLOW」slow playback Speed : 1/2x, 1/4x, 1/8x, 1/16x 「 / 」stop playback Speed : 1/2x, 1/4x, 1/8x, 1/16x Playback channel by channel with snap shot display Full screen display Quad display Zoom in video image 5
Resumen del contenido incluido en la página 10
2.4 PTZ Mode PTZ – Remote Controller Control / SLOW Move PTZ up. / Move PTZ down. / Move PTZ to the left. / Move PTZ to the right. ZOOM + PTZ zoom-in. ZOOM - PTZ zoom-out. FOCUS + PTZ focus-in. FOCUS - PTZ focus-out. IRIS + PTZ iris-open. IRIS - PTZ iris-close. TOUR Activate PTZ pre-set tour. * To save a preset location PRESET + NUMBER Press PRESET and a number key. DVR will save the current location. To go to a preset location PLAY + NUMBER Press PLAY and a
Resumen del contenido incluido en la página 11
Same as [PIP]. Set current PTZ location as the starting point of the line-scan. Same as [FREEZE]. Activate line-scan. Same as [ZOOM]. Set current PTZ location as the ending point of the line-scan. To move PTZ in 360° PTZ zoom in or PTZ zoom out. PTZ focus in or PTZ focus out. PTZ IRIS open or PTZ IRIS closes. Below functions needs support from specific PTZ. Please check the user manual of your PTZ manufacturer for detail. AUX 1~8. [AUTO] ＋「1」~ ＋「8」 [Backup] icon, cl
Resumen del contenido incluido en la página 12
Chapter 3 INSTALLATION 3.1 System Configuration 8
Resumen del contenido incluido en la página 13
3.2 Hard Disk Installation Step 1: Remove the 3 screws from DVR as cycled below (PIC 1). (PIC 1) Step 2: Remove the front cover from DVR as indicated by the arrow (PIC 2). (PIC 2) 9
Resumen del contenido incluido en la página 14
Step 3: Place the HDD on the HDD plate and connect the power and the SATA cables (PIC 3). (PIC 3) Step 4: Screw the bottom of the DVR as indicated as cycled (PIC 4). (PIC 4) 10
Resumen del contenido incluido en la página 15
Chapter 4 BASIC OPERATION and MENU SETUP 4.1 Main Menu Setup To enter the main menu and setup the DVR, please log-in account and enter user password. The default password of the administrator is “123456”. Please refer to “Account Setup” for related setup of other log-in users. Main Menu – Mouse Control (Right mouse click to enter Quick Setup Menu) Switch between capital and small letters. Switch between numbers and letters. / Press to cancel the setup,
Resumen del contenido incluido en la página 16
Main Menu – Remote Control ler and Front Pannel Control (Click MENU button to enter Quick Setup Menu ) Switch to different options under one item Switch to different items M M M ME E E EN N N NU U U U Press to confirm setup (OK) E ES SC C Press to cancel setup (CANCEL) E ES SC C E E E EN N N NT T T TE E E ER R R R Enter the menu, or display virtual keyboard 4.2 Record Setup 12
Resumen del contenido incluido en la página 17
Item Description Select STOP to stop recording or OVERWRITE to reuse the HDD when HDD is full. HDD FULL [Stop]：Stop Recording [Overwrite]：Start to overwrite beginning from the oldest data of HDD, and continue to record. OSD Position X Set time stamp of OSD position X OSD Position Y Set time stamp of OSD position Y OSD Position Setup OSD position time stamp setup Information stored within the HDD is preserved for only a specified length Video Preservation (Hours) of time. Quality
Resumen del contenido incluido en la página 18
4.3 Event Setup Item Description Motion Setup Enter to set up motion detection Sensor Setup Enter to set up sensor detection 4.3.1 Motion Setup 14
Resumen del contenido incluido en la página 19
Item Description Alarm Duration(Seconds) Alarm duration time (1~60 seconds). Check the box to Enable/ Disable popup screen function for all channels. Motion Popup When motion is detected in LIVE mode, the detected channel image will popup in full screen display. Enable Check the box to Enable/ Disable motion detection for each channel. Drag the bar or press ◀ ▶ to set up Sensitivity from value 0 to 10 for each Sensitivity channel. The lower value you set the higher sensitivity it will be
Resumen del contenido incluido en la página 20
4.3.2 Sensor Setup Item Description Alarm Duration(Seconds) Alarm duration time (1~60 seconds). Sensor Popup Check the box to Enable/Disable popup screen function for all channels. When Sensor is detected in LIVE mode, the detected channel image will pop up in full screen display. Sensor Polarity Click or press ▼ to select between HIGH/ LOW voltage for triggering sensor detection or OFF to turn off polarity for each channel Low Polarity：Sensor has not been triggered. When connecte
