Resumen del contenido incluido en la página 1
Resumen del contenido incluido en la página 2
Installation & Safeguards INSTALLATION & SAFEGUARDS All the safety and operating instructions should be read before the unit is operated. Environment Condition for Installation - To prevent electric shock or other hazard, do not expose units to rain, moisture, or dust. - This unit should be located in an area with low humidity and a minimum of dust.. - Place this unit in a well-ventilated place and do not place heat-generating objects on this unit. - This unit should not be located in an area w
Resumen del contenido incluido en la página 3
Contents Contents CHAP. 1 Features & Package Contents ---------------------------------------------------------------- 4 1-1. Features ---------------------------------------------------------------- 4 1-2. Package Contents ---------------------------------------------------------------- 5 CHAP. 2 Function of Each Button ---------------------------------------------------------------- 6 2-1. Front ---------------------------------------------------------------- 6 2-2. Rear ----------------------
Resumen del contenido incluido en la página 4
Contents 4-9. PTZ Camera Operation ---------------------------------------------------------------- 19 4-10. Data Back-Up ---------------------------------------------------------------- 19 CHAP. 5 Set Up ---------------------------------------------------------------- 20 5-1. Entering the Menu ---------------------------------------------------------------- 20 5-2. Display Setup ---------------------------------------------------------------- 21 1) Screen Display -------------------------------
Resumen del contenido incluido en la página 5
CHAP. 1 Features & Package Contents CHAP. 1 Features & Package Contents 1-1. Features Live View Real time display per camera Auto Sequence PIP (Picture in picture) Digital Zoom Display Freeze Simple Playback mode Simple PTZ camera control Record Variable Record resolution (For higher picture quality or higher recording speed) Efficient Image Quality setup in 5 steps Schedule Record / Holiday Record Event Record (Alarm / Motion) Emergency Record Network View Live and Playback images across IP
Resumen del contenido incluido en la página 6
CHAP. 1 Features & Package Contents 1-2. Package Contents 1. DVR Main Unit 2. Remote Controller 3. Power Cable 6. Software CD 4. Power Adapter 5. User’s Manual 7. Rubber Pad 8. HDD absorber 9. Battery for remote controller 10. Bolts Package Contents Description 1. DVR Main Unit STAND-ALONE DIGITAL VIDEO RECORDER 2. Remote Controller DVR control 3. Power Cable AC power supply to adapters for 12 V DC power 4. Power Adapter 12 V DC power supply 5. User’s Manual User’s Manual 6. Software CD Remot
Resumen del contenido incluido en la página 7
CHAP. 2 Function of Each Button CHAP. 2 Function of Each Button 2-1 FRONT Name Function ① LED Lamps Shows status of operation ② USB Device Firmware upgrade by connecting PC with latest firmware to USB port ③ IR IR receiver ④ Camera 1. Pressing this button will display a full screen image of that camera selection 2. Control PTZ camera (Each button is assigned for each PTZ command) & • ON : LIGHT ON • SET : SET PRESET PTZ camera control • OFF : LIGHT OFF • CLEAR : CLEAR PRESET • OPEN : IRIS O
Resumen del contenido incluido en la página 8
CHAP. 2 Function of Each Button Name Function ⑦ LIVE View PTZ On/Off for PAN/TILT/ZOOM control mode Control Press this button first to control PTZ camera connected to DVR unit via RS-485 ZOOM Zooming an image FRZ Freezing an Image MODE Switch to split display MODE button changes screen-division from (to) full screen to (from) 4-split screen. PIP Display in PIP (Picture in Picture) mode SEQ Auto camera image sequencing in full screen mode K.LOCK Lock the key function. To decontrol, press longe
Resumen del contenido incluido en la página 9
CHAP. 2 Function of Each Button 2-2. REAR Name Function 1 RS 485 Connection with PTZ Camera or other external device using RS 485 interface (Pin No.1 & 2) RELAY Output Relay out terminal (Pin No.3, 4 and 5) SENSOR Input Sensor input terminal(Pin No.6 : Ground, Pin No. from 7 to 10 : Sensor input) 2 VGA Connection to VGA Monitor (CRT type or TFT LCD monitor) Just in case you purchased DVR with VGA option board fixed on the main board of DVR, you can connect VGA Monitor to DVR unit. 3 ETHERN
Resumen del contenido incluido en la página 10
CHAP. 3 Installation CHAP.3 Installation 3-1. Installation Configuration 9
Resumen del contenido incluido en la página 11
CHAP. 3 Installation 3-2. Detailed Installation 1) Rack mount 1. Remove 4 bolts on each side cap to install rack mount. 2. Attach rack mount bracket to DVR. 3. Attach DVR with rack mount bracket to 19” rack. 2) HDD 1. Connect Main Board and HDD1 using IDE cable and HDD power cable. 2. The jumper setting of HDD1 should be on Master if you install only one HDD. 3. The jumper setting of HDD1 should be on Master and HDD2 should be on Slave if you install two HDDs.(Refer to the above
Resumen del contenido incluido en la página 12
1 CHAP. 3 Installation 3) Camera Connect cameras to the camera input on rear panel of DVR marked CAMERA IN. 4) Monitor CAMERA IN MONITOR CH1 CH2 CH3 CH4 VCR LOOP Connect the video output marked MONITOR to Video-In of Main monitor. 5) Power Do not connect the Main power CAMERA IN MONITOR and Sub power at the same time CH1 CH2 CH3 CH4 if this jumper MAIN SUB has not been VCR LOOP removed. DC12V When using a drive or drives larger than 200GB, you must use the Main and Sub power at the same time.
Resumen del contenido incluido en la página 13
CHAP. 3 Installation 6) VCR, VIDEO PRINTER CAMERA IN MONITOR CH1 CH2 CH3 CH4 VCR LOOP Connect VCR or VIDEO Printer to VCR out on the rear panel of DVR. 7) Other External Device RS-232C : Control DVR through RS-232C port by using PC. RS-485 : Control external device like PTZ Camera (Pin No.1 & No.2 at Terminal Block). RELAY Output : Relay Output (Pin No.3 ~No.5 at Terminal Block). SENSOR Input : SENSOR Input (Alarm connection)(Pin No.6 ~ No.10). ETHERNET : Connection to LAN, WAN, Internet. VGA
Resumen del contenido incluido en la página 14
CHAP. 3 Installation 8) Connector Pin Assignment No Description NO Description 1 DCD Data Carrier Detect 6 DSR Data Set Ready 2 RxD Receive data 7 RTS RS232C: Rx/Tx data 3 TxD Transmit data 8 CTS RS232C: Rx/Tx data 4 DTR Data Terminal data 9 5 GND Signal Ground 9) RS-232C ASCII-code Following ASCII-Codes(Hexa-Code) are for programmers who want to control DVR unit via the RS232C Port using keyboard of PC. All ASCII-Code is 1 Byte. REC ‘R’ LEFT ‘H’ ZOOM ‘Z’ QPLAY ‘Y’ CH7 ‘7’ CH14 ’$’ STOP
Resumen del contenido incluido en la página 15
CHAP. 4 Operation CHAP.4 Operation 4-1. Power connection Connect power adapter to MAIN only if you use 1 or 2 HDD under 200GB & CD writer. Connect 2 power adapters (both MAIN and SUB) if you use HDD with capacity of 200 GB or larger & CD writer. ※ DVR will not work if you connect the power adapter to SUB jack only. ※ Please refer to the Instruction for DC Power Adapter Connection included in the package for details. Before you turn on the power switch, be sure the all necessary devices such
Resumen del contenido incluido en la página 16
CHAP 4. Operation 4-3. Factory Default Before initial configuring or operation you must first set Time/Date, followed by setting the unit to the FACTORY DEFAULT settings, lastly clearing the HDD. Please follow these steps in order. Improper operation may result if this action is not taken. 2. FACTORY DEFAULT 1. HDD CLEAR HDD MANAGEMENT DISPLAY SETUP DISPLAY SETUP TIME/DATE SETUP CONFIGURATION CONFIGURATION CAMERA SETUP REOCRD SETUP REOCRD SETUP INTERVAL SETUP BACK-UP BACK-UP ALARM SETUP EXTERN
Resumen del contenido incluido en la página 17
CHAP. 4 Operation 4-5. Live View Setup 1) Full / Multiple View Switch to multi-screen display by pressing [MODE]. For full image display, just press the channel button which you want or [MODE] button again. Full screen Full screen Multi-screen [MODE] [MODE] or Channel button 2) View in Sequence Press [SEQ] button. It automatically displays full screen images in sequence. CH04 ● CH03 ● ● CH02 CH01 3) Picture in Picture(PIP View) When it is in full screen display mode, you can see other camera i
Resumen del contenido incluido en la página 18
Resumen del contenido incluido en la página 19
CHAP. 4 Operation 4-8. Search Press [SEARCH] button, and 3 different methods for searching recorded data are available as shown in following SEARCH window. For selecting searching method, use direction key or Jog/Shuttle. After selecting each search method, press [ENTER] button for playback. 1) SEARCH BAR Search by percentage of total recorded data. It starts from image corresponding to set % of data on the search bar. 2) TIME/DATE Search by time & date. Playback starts from the time & date s
Resumen del contenido incluido en la página 20
CHAP. 4 Operation 4-9. PAN/TILT/ZOOM Camera Operation Press [PTZ] button first for PTZ control mode. Numeric buttons from 1 to 16 and direction buttons are assigned for each PTZ command, and user can control PTZ camera connected to DVR unit by pressing any one of those 20 buttons, one after the other, as needed, and it is just like control by separate PTZ controller. Button PTZ command Button PTZ command 1/ON LIGHT ON 10/CLEAR PRESET CLEAR 2/OFF LIGHT OFF 11/GOTO PRESET GOTO 3/OPEN IRIS OPE
