Resumen del contenido incluido en la página 1
VER1.2
16Channel Stand Alone DVR
Audio, USB Backup available
Resumen del contenido incluido en la página 2
Installation & Safeguards INSTALLATION & SAFEGUARDS All the safety and operating instructions should be read before the unit is operated. Environment Condition for Installation - To prevent electric shock or other hazard, do not expose units to rain, moisture, or dust. - This unit should be located in an area with low humidity and a minimum of dust.. - Place this unit in a well-ventilated place and do not place heat-generating objects on this unit. - This unit should not be located in an area w
Resumen del contenido incluido en la página 3
Contents Contents CHAP. 1 Features & Package Contents ---------------------------------------------------------------- 4 1-1. Features ---------------------------------------------------------------- 4 1-2. Package Contents ---------------------------------------------------------------- 5 CHAP. 2 Function of Each Button ---------------------------------------------------------------- 6 2-1. Front ---------------------------------------------------------------- 6 2-2. Rear ----------------------
Resumen del contenido incluido en la página 4
Contents CHAP. 5 Set Up ---------------------------------------------------------------- 19 5-1. Entering the Menu ---------------------------------------------------------------- 19 5-2. Display Setup ---------------------------------------------------------------- 20 1) Screen Display ---------------------------------------------------------------- 20 2) Monitor Setup ---------------------------------------------------------------- 20 5-3. Configuration ----------------------------------------
Resumen del contenido incluido en la página 5
CHAP. 1 Features & Package Contents CHAP. 1 Features & Package Contents 1-1. Features Live View Real time display per camera Auto Sequence PIP (Picture in picture) Event Popup Digital Zoom Display Freeze Simple Playback mode Simple PTZ camera control Record Variable Record resolution (For higher picture quality or higher recording speed) Efficient Image Quality setup in 5 steps Schedule Record / Holiday Record Event Record (Alarm / Motion) Emergency Record Network View Live and Playback imag
Resumen del contenido incluido en la página 6
CHAP. 1 Features & Package Contents 1-2. Package Contents 1. DVR Main Unit 2. Remote Controller 3. Power Cable 6. Software CD 4. Power Adapter 5. User’s Manual 7. Rubber Pad 8. HDD absorber 9. Battery for remote controller 10. Bolts Package Contents Description 1. DVR Main Unit STAND-ALONE DIGITAL VIDEO RECORDER 2. Remote Controller DVR control 3. Power Cable AC power supply to adapters for 12 V DC power 4. Power Adapter 12 V DC power supply 5. User’s Manual User’s Manual 6. Software CD Remot
Resumen del contenido incluido en la página 7
CHAP. 2 Function of Each Button CHAP. 2 Function of Each Button 2-1 FRONT Name Function ① LED Lamps Shows status of operation ②-1 USB HOST Back-Up by connecting USB Media to USB HOST ②-2 USB Device Firmware upgrade by connecting PC with latest firmware to USB port ③ IR IR receiver ④ Camera 1. Pressing this button will display a full screen image of that camera selection 2. Control PTZ camera (Each button is assigned for each PTZ command) & • ON : LIGHT ON • SET : SET PRESET PTZ camera contr
Resumen del contenido incluido en la página 8
CHAP. 2 Function of Each Button Name Function ⑦ LIVE View PTZ On/Off for PAN/TILT/ZOOM control mode Control Press this button first to control PTZ camera connected to DVR unit via RS-485 ZOOM Zooming an image FRZ Freezing an image MODE Switch to split display MODE button changes screen-division from (to) full screen to (from) 16-split screen. PIP Display in PIP (Picture in Picture) mode SEQ Auto camera image sequencing in full screen mode K.LOCK Lock the key function. To unlock, press longer
Resumen del contenido incluido en la página 9
CHAP. 2 Function of Each Button 2-2. REAR Name Function 1 RS 485 Connection with PTZ Camera or other external device using RS 485 interface RELAY Output Relay out terminal SENSOR Input Sensor input terminal 2 VGA Connection to VGA Monitor (CRT type or TFT LCD monitor) Just in case you purchased DVR with VGA option board fixed on the main board of DVR, you can connect VGA Monitor to DVR unit. 3 ETHERNET Connection to ETHERNET device 4 RS-232C Connection to external device as PC using RS-232C
Resumen del contenido incluido en la página 10
CHAP. 3 Installation CHAP.3 Installation 3-1. Installation Configuration 9
Resumen del contenido incluido en la página 11
CHAP. 3 Installation 3-2. Detailed Installation 1) Rack mount 1. Remove 4 bolts on each side cap to install rack mount. 2. Attach rack mount bracket to DVR. 3. Attach DVR with rack mount bracket to 19” rack. 2) HDD Connection of HDD Cable HDD fix I/O BOARD I/O BOARD MAIN BOARD MAIN BOARD HDD1 HDD2 x x x x x x HDD1 HDD2 CD-RW x x x x x x (MASTER) 1. Connect Main Board and HDD using SATA HDD data cable and HDD power cable. 2. When you use just 1 HDD, install the HDD onto HDD1 loc
Resumen del contenido incluido en la página 12
CHAP. 3 Installation 3) Camera Connect cameras to the camera input on rear panel of DVR marked CAMERA IN. 4) Monitor VIDEO A VIDEO B VIDEO C IN OUT IN OUT IN OUT Connect the video output marked MONITOR to Video-In of Main monitor. 5) Power Connect one DC 12V, 6.67 A Adaptor to the back side of Power Jack for right operation of 2HDDs and CDRW. Before you turn on the Power switch, be sure all necessary devices such as Power adaptor, cameras and Monitor are connected properly to DVR! Notice To
Resumen del contenido incluido en la página 13
CHAP. 3 Installation 6) SPOT, VIDEO PRINTER Connection with additional composite monitor 7) Other External Device RS-232C : Control DVR through RS-232C port by using PC. RS-485 : Control external device like PTZ Camera. (Pin No.1 & No.2 at Terminal Block). RELAY Output : Relay Output. (Pin No.3 ~No.5 at Terminal Block) SENSOR Input : SENSOR Input (Alarm connection) – (Pin No.6 ~ No.26 at Terminal Block) ETHERNET : Connection to LAN, WAN, Internet. VGA : Connection to a VGA monitor(CRT,TFT LCD)
Resumen del contenido incluido en la página 14
CHAP. 4 Operation 4-1. System Log-In DVR LOG-IN 1) To enter into the setup menu, press the [MENU] button. 2) Enter password with channel number button from No.1 to No.10 on the front of the DVR unit. ENTER PASSWORD (Maximum of 8 digits are available) _ _ _ _ _ _ _ _ INPUT YOUR OWN PASSWORD 3) After inputting the password, press the [ENTER] button. TO EXIT, PRESS [MENU] Administrator : If the password entered matches previously set password, “ LOGIN ADMIN” message appears and you can enter
Resumen del contenido incluido en la página 15
CHAP 4. Operation 4-3. Display Configuration HDD Status ETHERNET status In live mode : Amount of data recorded Connected In Playback mode : Amount of data played Disconnected Current Time & Date Status of DVR system Emergency Record (Red) Schedule Record (Green) Record Stop (White) PIP Stop Forward Playback FREEZE Backward Playback Pause SEQUENCE 1/16~1/2x forward playback 1/16~1/2x backward playback ZOOM 2~4x forward playback 2~4x backward playback AUDIO 16~64x forward playback 16~64x
Resumen del contenido incluido en la página 16
CHAP. 4 Operation 2) View in Sequence Press [SEQ] button. It automatically displays full screen images in sequence. CH16 ● ● ● ● …… ● ● ● ● ● ● ● ● CH02 CH01 3) Picture in Picture(PIP View) When it is in full screen display mode, you can see other camera in a small window by pressing [PIP].The other camera in small window is rotating in sequence to next number of camera and you can set the rotating time interval as per the procedure in SYSTEM MENU-CONFIGURATION- INTERVAL SETUP. CAM-01 2 4)
Resumen del contenido incluido en la página 17
CHAP. 4 Operation 4-5. Record Recording mode set before delivery by manufacturer (Default recording mode) is Schedule Recording. In this default recording mode, it records 24 hours/day continuously in weekday and on the weekend. Once you press the [REC] button while you see live view, the record type is changed to Emergency Record mode. - Emergency Record : at full resolution/in best quality Emergency Record [RED] Record type : CONTINUOUS, SUPER FINE quality, 120 (100) ips at 720X240 (720x288)
Resumen del contenido incluido en la página 18
CHAP. 4 Operation 4-7. Search Press [SEARCH] button, and 3 different methods for searching recorded data are available as shown in following SEARCH window. For selecting searching method, use direction key or Jog/Shuttle. After selecting each search method, press [ENTER] button for playback. exit, press [MENU] button. 1) SEARCH BAR Search by percentage of total recorded data. It starts from image corresponding to set % of data on the search bar. 2) TIME/DATE Search by time & date. Playback s
Resumen del contenido incluido en la página 19
CHAP. 4 Operation Button PTZ command Button PTZ command 1/ON LIGHT ON 10/CLEAR PRESET CLEAR 2/OFF LIGHT OFF 11/GOTO PRESET GOTO 3/OPEN IRIS OPEN 12/AUTO AUTO SCAN 4/CLOSE IRIS CLOSE 13/F1 ~ 16/F4 FUNCTION 5/NEAR FOCUS NEAR UP BUTTON TILT UP 6/FAR FOCUS FAR DOWN BUTTON TILT DOWN 7/WIDE ZOOM IN LEFT BUTTON PAN LEFT 8/TELE ZOOM OUT RIGHT BUTTON PAN RIGHT 9/SET PRESET SET 4-9. Data Back-Up Enter into SYSTEM MENU-BACKUP-CD-R SETUP. 1) Insert empty CD-R media into CD writer and select the start time
Resumen del contenido incluido en la página 20
CHAP. 5 Set Up CHAP. 5 Set Up 5-1. Entering into the Menu Enter into SYSTEM MENU by pressing [MENU] button. Button Function MENU Enter into SYSTEM MENU, Move to previous menu, ESC ENTER Selection key, Move to sub-menu, change status (ON or OFF) NEXT Move to next page UP Move to upper side DOWN Move down side LEFT Move to the left RIGHT Move to the right MINUS [-] Decrease the option value PLUS [+] Increase the option value Jog Shuttle Jog left turning : Move backward to next image / Decrease