Resumen del contenido incluido en la página 1
Digital Cable Receiver
Digital-tvmottagare
The default password is 0000.
Standardlösenordet är 0000.
User’s Manual
Användarmanual
CXHD-5000C
Resumen del contenido incluido en la página 2
Notice Thank you for purchasing a HUMAX product. Please read this user’s manual carefully to be able to safely install, use and maintain the product at maximum performance. Keep this user’s manual next to your product for future reference. The information in this user’s manual is subject to change without notice. Copyright (Copyright © 2008 HUMAX Corporation) Not to be copied, used or translated in part or whole without HUMAX’s prior consent in writing except approval of ownership of copyrigh
Resumen del contenido incluido en la página 3
Notice Warnings, Cautions and Notes Throughout the whole manual, pay special attention to the following marks that indicate hazardous situations. • Warning Indicates a hazardous situation which could result in serious injury. • Caution Indicates a situation which could damage the equipment or other apparatus. • Note Indicates additional information to make the user aware of possible problems and information of any importance to help understand, use and maintain the installation. Meaning of
Resumen del contenido incluido en la página 4
Safety Warning This product has been manufactured to comply with international safety standards. Please read the following safety precautions carefully. Safety Instructions and Precautions 1. MAINS SUPPLY 90-250V a.c., 50/60Hz • Operate this product only from the type of power supply indicated on the marking label. If you are not sure of the type of power supplied to your home, consult your local power company. • Disconnect the product from the mains before you start any maintenance or inst
Resumen del contenido incluido en la página 5
Safety Warning 10. LIGHTNING, STORM or NOT IN USE • Unplug the product from the wall outlet and disconnect the antenna during a thunderstorm or when left unattended and unused for long periods of time. This will prevent damage to the unit due to lightning and power-surges. 11. EXTRANEOUS OBJECTS • Do not insert anything through the openings in the unit, where they can touch dangerous voltage points or damage parts. 12. REPLACEMENT of PARTS • When replacement of parts is required, be sure the
Resumen del contenido incluido en la página 6
Contents 1. Before Using the Product . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB7 1.1 Package Contents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB7 1.2 Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Resumen del contenido incluido en la página 7
Contents 7. Preferences. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB36 7.1 Parental Control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB36 7.2 Language Setting. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Resumen del contenido incluido en la página 8
1. Before Using the Product This chapter provides detail instructions on the product and its accessories. 1.1 Package Contents Please check all package contents before using your product. User’s Manual Batteries User’s Manual Remote Control HDMI Cable SCART Cable Note: • Faults may occur if the remote control is left without battery for a long time. Always keep the battery inserted in the remote control. • Package contents may vary according to area. GB7 User’s Manual
Resumen del contenido incluido en la página 9
1. Before Using the Product 1.2 Front Panel 12 3 4 5 6 7 8 9 10 1. STANDBY BUTTON Switches between operation and standby modes. 2. TV/RADIO BUTTON Switches between TV and radio modes. 3. ARROW BUTTONS Changes the channel or moves the cursor up, down, left or right. 4. OK Selects a menu or confi rms the selected operation. Displays the channel list while watching a programme. 5. MENU Displays the main menu. 6. GUIDE Displays the programme guide. 7. STANDBY LED Red light is emitted when t
Resumen del contenido incluido en la página 10
1. Before Using the Product 1.3 Conditional Access Although some TV and radio services are free to air, others are available on a subscription basis and can only be enjoyed via a Conditional Access component. The Conditional Access component is a removable Smartcard. 1. Inserting the Smartcard The Smartcard looks similar to a credit card and is inserted into the slot behind the right-hand front fl ap of the product. A valid Smart
Resumen del contenido incluido en la página 11
1. Before Using the Product 1.4 Rear Panel 1 2 3 4 5 6 7 8 9 10 11 12 1. CABLE IN 8. COMPONENT(YPbPr) Connects a network cable. Connects to the TV or VCR using a component cable. 2. CABLE OUT Connects to the RF IN of the TV or VCR 9. VIDEO using an RF cable. Connects to the TV or VCR using an RCA cable. 3. TV SCART Connects to the TV using a TV SCART cable. 10. AUDIO Connects to the TV or VCR using an RCA 4. VCR SCART cable. Connects to the VCR or DVD using a VCR SCART cable. 11. COM
Resumen del contenido incluido en la página 12
1. Before Using the Product 1.5 Remote Control 1. SOURCE 1 Controls the output of TV SCART. 2. TV/RADIO 2 Switches between TV and radio modes. 3. NUMERIC(0-9) BUTTONS 3 Enters a TV/radio channel number or menu option number. 4. OPT+ Displays the channels attributes while watching a 4 programme. 5 5. EXIT Exits all On-Screen Display (OSD) screens. 6. ARROW BUTTONS 6 Navigates through the menu options. 7. COLOUR BUTTONS(R/G/Y/B) 7 Select the colour keys for interactive applications. 8. P-
Resumen del contenido incluido en la página 13
1. Before Using the Product 13. STANDBY Switches between operation and standby modes. 13 14. GUIDE Displays the programme guide. 15. BACK Closes and returns to the previous menu and screen. 16. OK Selects a menu or confi rms the selected operation. 14 17. V-/V+ Adjusts the audio volume. 15 18. MUTE Mutes or unmutes the audio temporarily. 19. SUBTITLE 16 Displays the subtitle language list. 20. AUDIO Displays the audio list. 17 21. SLEEP Sets the sleep time. 18 22. V-FORMAT 19 Changes t
Resumen del contenido incluido en la página 14
1. Before Using the Product 1.6 Remote Control Batteries 1. Press down the top of the battery cover and slide the cover off . 2. Insert the new batteries. Make sure the plus (+) ends meet the plus markings on the battery case. 3. Slide the cover back into place. GB13 User’s Manual
Resumen del contenido incluido en la página 15
2. Setup This chapter describes how to connect your product to the TV with the particular equipments for gaining optimum signal quality. The product provides various interfaces to connect to the TV, VCR or other devices. Select the most appropriate procedure depending on the equipment you have. Note: • If you encounter any problems setting up your product, please contact your local product distributor. • The rear image of the TV and VCR may diff er depending on the manufacturer and model. 2.1
Resumen del contenido incluido en la página 16
2. Setup 2.2 Using DVI Converter The DVI connection using an HDMI to DVI converter is recommended for Digital TV. In case the TV has a DVI input connector, connect the product to the TV with an HDMI cable using an HDMI to DVI converter as follows. 1. When equipped with an A/V receiver 1. Connect your CATV line to the CABLE IN. 2. Connect one end of the HDMI cable to the HDMI input on the product and the other end to the HDMI to DVI conver
Resumen del contenido incluido en la página 17
2. Setup 2. When there is no A/V receiver available In case you are not equipped with an A/V receiver, connect the product and the TV using an audio cable as follows. 1. Connect your CATV line to the CABLE IN. 2. Connect the product and the TV using an RCA cable. 3. Connect one end of the HDMI cable to the HDMI input on the product and the other end to the HDMI to DVI converter. 4. Connect the DVI converter to the TV. Note: You can also co
Resumen del contenido incluido en la página 18
2. Setup 2.3 Using Component Cable The component connection is recommended for Digital TV. Connect the product and the TV using a component cable as follows. 1. Connect your CATV line to the CABLE IN. 2. Connect the product and the TV using a component cable. You can either: 3. 1) Connect the product and the TV using an RCA cable (Audio L/R). 2) Connect the product and the Dolby Digital decoder using an S/PDIF cable. Note: The Component Select switch should be on YPbPr when using the componen
Resumen del contenido incluido en la página 19
2. Setup 2.4 Using SCART Cable A SCART cable connection is recommended for analogue TV or VCR. Connect the product and the TV using a SCART cable as follows. 1. Connect your CATV line to the CABLE IN. 2. Connect the product and the TV using a SCART cable. 3. Connect the product and the VCR using a SCART cable. Note: The Component Select switch should be on RGB when using the SCART cable. Cable Outlet RF Cable SCART Cable SCART Cable TV SCART VCR SCART GB18 User’s Manual
Resumen del contenido incluido en la página 20
2. Setup 2.5 Powering On 1. Connect the power cord of the product to a wall outlet. 2. Power on by pressing the STANDBY button of the remote control or the STANDBY button at the front of the product. GB19 User’s Manual
