Resumen del contenido incluido en la página 17
MENU 6.2 DAYLIGHT SAVING TIME DAYLIGHT SAVING SETTING MENU DAYLIGHT SAVING: YES START TIME: LAST SUN IN MARCH CHANGE FROM 02:00 TO 03:00 STOP TIME: FIRST SUN IN OCTOBER CHANGE FROM 03:00 TO 02:00 This menu provides automatically switching to Daylight Saving Time and back to Normal Time. Standard start and end times in Middle Europe: Last Sunday in March - change from 02:00 + 1 hour Last Sunday in October- change from 03:00 - 1 hour Settings: START TIME: Set date and time for sw
Resumen del contenido incluido en la página 18
MENU 6.3 TIMER SETTING MENU TIMER SETTING MENU WEEK START STOP SPEED SET SUN 00:00 23:59 50 IPS OFF SUN 00:00 23:59 50 IPS OFF SUN 00:00 23:59 50 IPS OFF SUN 00:00 23:59 50 IPS OFF SUN 00:00 23:59 50 IPS OFF SUN 00:00 23:59 50 IPS OFF SUN 00:00 23:59 50 IPS OFF SUN 00:00 23:59 50 IPS OFF SUN 00:00 23:59 50 I
Resumen del contenido incluido en la página 19
MENU 6.4 SEQUENCE SETTING MENU SEQUENCE SETTING MENU CH OP DWELL 1 ON 03 SECS 2 ON 03 SECS 3 ON 03 SECS 4 ON 03 SECS 5 ON 03 SECS 6 ON 03 SECS 7 ON 03 SECS 8 ON 03 SECS 9 ON 03 SECS 10 ON 03 SECS 11 ON 03 SECS 12 ON 03 SECS 13 ON 03 SECS 14 ON 03 SECS 15 ON 03 SECS 16 ON 03 SECS 10 to 16 only valid for EDSR-1600 In the SEQUENCE SETTING MENU, we define for MAIN
Resumen del contenido incluido en la página 20
MENU 6.5 TITLE SETTING MENU TITLE SETTING MENU CH TITLE 1 CH01_ _ _ _ _ 2 CH02_ _ _ _ _ 3 CH03_ _ _ _ _ 4 CH04_ _ _ _ _ 5 CH05_ _ _ _ _ 6 CH06_ _ _ _ _ 7 CH07_ _ _ _ _ 8 CH08_ _ _ _ _ 9 CH09_ _ _ _ _ 10 CH010_ _ _ _ _ 11 CH011_ _ _ _ _ 12 CH012_ _ _ _ _ 13 CH013_ _ _ _ _ 14 CH014_ _ _ _ _ 15 CH015_ _ _ _ _ 16 CH016_ _ _ _ _ 10 to 16 only valid for EDSR-1600 In the TITLE SETTING MENU we define: The Title Settin
Resumen del contenido incluido en la página 1
INSTRUCTION MANUAL
EDSR-900
9 Channel Duplex Digital Video Recorder
EDSR-1600
16 Channel Duplex Digital Video Recorder
V1.09
Resumen del contenido incluido en la página 2
Safety Precautions CAUTION DO NOT REMOVE COVER. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. WARNING TO REDUCE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. Safety Precautions Refer all work related to the installation of this product to qualified service personnel or system installers. Do not block the ventilation opening or slots on the cover. Do not drop metallic parts through slots.This could permanently damage the
Resumen del contenido incluido en la página 3
Safety Precautions Safety Precautions Warning: The lightning flash with an arrowhead symbol, within an Electrostatic-sensitive device. Use proper equilateral triangle, is intended to alert the user to the CMOS/MOSFET handing precautions to avoid presence of uninsulated ”dangerous voltage”within the electrostatic discharge. product’ s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons UNPACKING Unpack carefully. The exclamation point within an
Resumen del contenido incluido en la página 4
Important Safeguards Important Safeguards Read Instruction---All the safety and operating instructions should be read before the init is operated Retain Instructions---The safety and operating instructions should be retained for future reference. Heed Warnings— All warnings on the unit and in the operating instructions should be adhered to. Follow Instructions— All operating and use instructions should be followed Cleaning— Unplug the unit from the outlet before cleaning. Do not use liquid clean
Resumen del contenido incluido en la página 5
Table of Contents 1. Product Overview…………………………………… .……………… ..… ..… .. ............ Page 1 1.1 Main features………………………………………………………………… .....… ..……… 1 1.2 Specifications……………………………………………………………… ..……………… . 2 2. Back panel connections…………………………………………… ......……… ................ 3~4 3. System connection………………………… .…………………………………… .......……… . 5 Before installation…… ..………………………………………………………………………… . 5 4. Front panel keypads……………………………………………… .………… ...........…… ...6~7 5. Operation…………………………………………………………
Resumen del contenido incluido en la página 6
Product Overview 1. Product Overview The EDSR-900 / EDSR1600 Duplex Digital Video Recorder (DVR) a full-featured DVR designed specifically for use in security industry. The DVR incorporates all the benefits of digital video recording, is simple to install, and operates just like a VCR. Highly efficient compression technology and superior resolution of recorded images make the DVR stand out from the competition as the best choice for security surveillance. The 16 (in) x 5 (out) Matrix Ou
Resumen del contenido incluido en la página 7
Specifications 1.2 Specifications Video Format NTSC/PAL Video Input 9 (EDSR900) / 16 (EDSR1600) camera inputs (BNC),1Vp-p/75ohm Video Output 1 BNC video out (1Vp-p/75 ohm) for Main Monitor 1 S-Video out Mini DIN for Main Monitor 5 BNC video out (1Vp-p/75 ohm) for Matrix / CALL Monitor output 9 (EDSR900) / 16 (EDSR1600) video out (1Vp-p/ 75 Ohm)for looping Video Compression M-JPEG Recording Resolution 720x484 (NTSC); 720x576 (PAL) Compact Flash Memory built-in Compact Flash card slot Alarm Inp
Resumen del contenido incluido en la página 8
Back Panel Connections 2. Back Panel Connections 6 1 2 3 5 4 EDSR-900 14 13 11 12 7 9 10 8 3 1 6 2 5 4 EDSR-1600 14 13 11 12 7 9 10 8 1 ON/OFF: Main on/off switch. 2 AC100~240V power socket. 3 Matrix Outputs: These connectors are used for additional 4 programmable Call monitors. With these outputs, there are totally 4 Matrix out monitors. These monitors can only display full screen as regular call monitor. 4 VIDEO IN: BNC-sockets for composite signal video inputs, automatic 75 Ohm termi
Resumen del contenido incluido en la página 9
Back Panel Connections 10 ALARM I/O: (Refer pin assignment in Appendix-C, Page 44) ALM-INPUT : Normally Open (N.O) or Normally Close (N.C) type alarm sensor input. The Alarm Input can be selected as N.O or N.C input in the setup menu. When an alarm occurs, alarm recording will automatically start. ALM-OUTPUT : Two-way contact relay alarm output. In normal condition, this N.C. contact shorted to ALM-COM. In alarm status, it is open between ALM-NC and ALM-COM, N.O. is shorted to ALM-COM. 11
Resumen del contenido incluido en la página 10
System Connection 3. System Connection The installations described below should be made by qualified service personnel or system installers. Before Installation Please refer to the following diagram for the system connections. EDSR 900: Camera 1~9 / EDSR-1600: Camera 1 ~ 16 ~ Alarm In/Out Audio Input (camera Audio Out) Ethernet RS232 Audio Out (To Speaker) RS485 Matrix Outputs Remote Keyboard(s) MAIN Monitor CALL Monitor 4 CALL Monitors KS-KBJ / KS-KBK (Optional) (optional) or Speed dome / telem
Resumen del contenido incluido en la página 11
Front Panel Keypads 4. Front Panel Keypads 12 2 EDSR-900 1 11 10 22 9 8 7 6 5 3 4 13 14 15 16 17 18 19 20 21 2 EDSR-1600 1 SHUTTLE Ring and JOG Dial SHUTTLE : In Playback mode, turn the shuttle ring to fast forward/rewind the picture (600X maximum). In Pause mode, turn the shuttle dial to slow forward/rewind the picture (1/32 maximum). JOG : In Pause mode, turn the jog dial to step forward/rewind the Picture. In Menu mode turn the jog dial to select options. 2 CHANEL KEYS:. Press
Resumen del contenido incluido en la página 12
Front Panel Keypads In Full screen mode this menu allows color adjustment for each video channel, all channels are separately adjustable. The selected item will show in red color bar. Use JOG to increase or decrease the value. Press ENTER to confirm and move to next item. After finished setting, press SELECT key to discard change or press MENU key to save and exit the dialog. In Multi-screen mode: In Multi-screen mode the SELECT key allows to define cameras in all multi-screen views. Press
Resumen del contenido incluido en la página 13
Operation 5. Operation (1) Insert a HDD (IDE) for Video Storage Insert one or two HDD (3.5” IDE) for Video Storage. The HDD should be set as Cable Select or MASTER. Both HDD need equal setting. (Normally the default setting of HDD is Master) Note: After hard disk case is inserted into the hard disk tray, be sure to turn the tray key in lock position.Otherwise, HDD will not be detected. ATTENTION: Changing HDD s and switching on HDD s is not allowed in record mode! (2) Connect cable for
Resumen del contenido incluido en la página 14
MENU flow 6. MENU FLOW Columns in brackets () only valid for EDSR-1600 MOTION TITLE CLOCK ( See page 18 ) ( See page 15 ) ( See page 11 ) TITLE SETTING MENU CH OP SEN DURATION CLOCK SETTING MENU CH TITLE 1 CH01_ _ _ _ _ 1 OFF HIGH 07 SECS : 2005/04/15 FRI DATE 2 CH02_ _ _ _ _ 2 OFF HIGH 07 SECS : 13:01:02 TIME 3 CH03_ _ _ _ _ 3 OFF HIGH 07 SECS 4 CH04_ _ _ _ _ 4 OFF HIGH 07 SECS 5 CH05_ _ _ _ _ 5 OFF HIGH
Resumen del contenido incluido en la página 15
MENU flow Columns in brackets () only valid for EDSR-1600 MATRIX MATRIX CONTROL SUB-MENU ( See page 27 ) ( See page 24) MONITOR-3 SETTING MENU MATRIX SETTING MENU CH DWELL EVENT CONTROL SETTING MENU CALL NONITOR 1 07 SECS NONE MONITOR-1 2 07 SECS NONE RS232 MONITOR-2 3 07 SECS NONE BAUD RATE : 9600 BPS MONITOR-3 4 07 SECS NONE : 1 MONITOR-4 STOP BIT 5 07 SECS NONE PARITY : NONE 6 07 SECS NONE DATA BIT : 8 7
Resumen del contenido incluido en la página 16
MENU 6.1 CLOCK SETTING MENU CLOCK SETTING MENU : 2005/04/15 FRI DATE : 13:01:02 TIME : ENGLISH MENU LANGUAGE VIDEO SYSTEM : PAL VERSION: 1.09 2005/01/20 In CLOCK/LANGUAGE SETTING MENU , we define: (1) DATE : Current date, format: YYYY/MM/DD Year: 2000 ~ 2099, Month: 01~ 12, Date: 01~31, Week: Sunday~Saturday (2) TIME : Current time, format: HH:MM:SS Hour: 00 ~ 23, Minute : 00 ~ 59, Second: 00 ~ 59 (3) MENU LANGUAGE: ENGLISH (4) VIDEO SYSTEM: Factory default setting depend on m
