Resumen del contenido incluido en la página 1
DVP620VR
DVP620VR
Digital Video Disc Player &
Video Cassette Recorder
VIDEO Plus+ and PlusCode are registered trademarks
of Gemstar Development Corporation.The VIDEO
Plus+ system is manufactured under license from
Gemstar Development Corporation.
1
1
Resumen del contenido incluido en la página 2
General Information Introduction The region code for this set is 2. Thank you for purchasing this Philips DVD/ VCR.This Owner’s Manual explains the basic operation of this DVD/ VCR. Since it is usual for DVD movies to be released at different times in different regions of the Environmental Information world, all players have region codes and discs can All unnecessary packaging has been omitted. have an optional region code. If you load a disc 2 Packaging has been made easy to separate into three
Resumen del contenido incluido en la página 3
Contents Introduction Programming a Recording (TIMER) Environmental Information. . . . . . . . . . . . . . . . . . . . . 2 General information . . . . . . . . . . . . . . . . . . . . . . . . . 12 Supplied Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Programming a recording Interference. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 (with the 'VIDEO Plus+ system') . . . . . . . . . . . . . . . 12 Safety Information. . . . . . . . . . . . . . . . . . . . .
Resumen del contenido incluido en la página 4
Functional Overview 14. I RECORD button (VCR) Front Panel press once to start recording, repeatedly to start an One- 13 2 4 5 Touch Recording 15. B PLAY button (VCR) STANDBY-ON OPEN/CLOSE to play a tape POWER ON 16. A STOP/EJECT button (VCR) VCR DVD VIDEO L -- AUDIO -- R REW F.FWD STOP/EJECT PLAY RECORD CHANNEL STOP PLAY D.DUBBING SOURCE when playback is stopped, press to eject the tape 17. g F.FWD when tape playback is stopped, press to fast forward the tape 19 1817 16 1514 13 12 11 10 9 8 7 6
Resumen del contenido incluido en la página 5
Functional Overview 3. COAXIAL (Digital audio out) jack (DVD only) Rear Panel connect to AUDIO inputs of a digital (coaxial) audio equipment 4. AUDIO OUT (Left/Right) jacks (DVD only) connect to AUDIO inputs of an amplifier, receiver or stereo system DVD DIGITAL ANALOG S-VIDEO AERIAL AUDIO OUT AUDIOOUT OUT 5. S-Video Out jack (DVD only) connect to a TV with S-Video inputs VCR AV2(DECODER) L OPTICAL COAXIAL DVD/VCR AV1(TV) RF OUT 6. AV2 (DECODER) jack (VCR only) R connect SCART cable from another
Resumen del contenido incluido en la página 6
ANTENNA IN Setting Up your DVD/VCR Important for the United Kingdom Connecting to a TV This apparatus is fitted with an approved moulded 13 Amp 1 Connect the antenna or cable to the AERIAL of your DVD/ plug.To change a fuse in this type of plug proceed as follows: VCR. 1 Remove fuse cover and fuse. 2 Connect the DVD/ VCR (AV1 TV) on the DVD/ VCR to the 2 Fix new fuse which should be a BS1362 3A,ASTA or BSI corresponding connector on the TV. approved type. Note: 3 Refit the fuse cover. – Ensure t
Resumen del contenido incluido en la página 7
Setting Up your DVD/VCR Connecting to Optional Equipment Playable Video Cassette Tapes (for DVD features) Philips Consume Electronics recommends that only video cas- sette tapes that have the VHS mark and High Quality (HQ) sys- • A digital component with a built-in MPEG 2 or Dolby TM tem is compatible with this DVD/ VCR.This Digital decoder allows you to enjoy the surround sound DVD/ VCR has an Automatic Head Cleaner. while producing the effect of being in a movie theater or a concert hall. Reco
Resumen del contenido incluido en la página 8
Setting Up your DVD/VCR Video Channel Setting Manual Channel Preset Video channel setting will be necessary, if your DVD/VCR is 1 Press VCR, then DISC/VCR MENU. connected to the TV via the coaxial cable. 2 Press K/L to select “TUNER SET UP”, then press B. 1 Insert a pre-recorded tape into the DVD/VCR.The DVD/VCR 3 Press K/L to select “MANUAL MANUAL TUNING will turn on and start playback automatically. TUNING”, then press B. →PROG. P55 If playback does not start, press PLAY B . 4 Press K/L to sel
Resumen del contenido incluido en la página 9
Setting Up your DVD/VCR Sorting TV channels manually Setting the RF out channel After you have performed the automatic channel search you In some reception locations it is possible that a TV channel will may not agree with the sequence in which the individual TV be sent on the same or similar frequency as the DVD/ VCR. channels have been allocated to the programme positions (pro- Result:As soon as the DVD/ VCR is switched on, the reception gramme numbers) of the DVD/ VCR.You can use this functio
Resumen del contenido incluido en la página 10
VCR Playback Playing back cassettes Searching for a tape position with picture You can operate the DVD/ VCR using the remote control or (scanning) the buttons on the front of the DVD/ VCR. If you press PLAY 1 During playback, press or one or more times. h g B,STOP C, or while the set is in Stand-by, the h g 2 If you want to search in super high speed, press or h power will be automatically turned on.Additionally, if a cassette once more. (This function will not operate for a cas- g was already i
Resumen del contenido incluido en la página 11
VCR Manual Recording Automatic controlled recording from a General information Use 'Manual Recording' to make a spontaneous recording satellite receiver (RECORD LINK) (for example, a programme currently being shown). This function automatically starts recording on the switched-off If you want to start and stop a recording manually, read the DVD/ VCR when a video signal is recognised through the con- section 'Recording without automatic switch-off'. nected scart cable. If your satellite receiver
Resumen del contenido incluido en la página 12
VCR Manual Recording Programming a Recording (TIMER) General information Direct dubbing Use a TIMER programming to automatically start and stop a Follow the steps below to copy a DVD or video disc to a recording at a later time or date.The DVD/ VCR will switch to videotape.This will be possible only if the DVD is not copy the right programme number and begin recording at the cor- protected. rect time.With this DVD/ VCR, you can pre-programme up to 1 Put a videotape in the cassette compartment. M
Resumen del contenido incluido en la página 13
Programming a Recording (TIMER) “- -” appears at PROG. . Programming a recording • The programme number of the TV channel has not yet been (without the VIDEO Plus+ system) assigned to the Plus Code number. Using numerical key pads, 1 Press VCR, then DISC/VCR MENU. select the corresponding programme number (name) of the TV SELECT KL CHOOSE B 2 Select “TIMER” with K/L.Then channel. →ONCE press B. The following message appears on the screen:“ERROR” DAILY 3 Select “ONCE”, “DAILY”, or • The entered
Resumen del contenido incluido en la página 14
Programming a Recording (TIMER) How to check, or delete a programmed recording (TIMER) SELECT KL CHOOSE B 1 Press VCR, then DISC/VCR MENU. ONCE 2 Press K/L to select “TIMER”.Then DAILY WEEKLY press B. →TIMER LIST 3 Press K/L to select “TIMER LIST” , then press B. 4 Select timer block with B. END=EXIT Timer block disappeared when I pressed . g You have checked all the programmed recordings. If you want to check them again, repeat steps 1 to 4. 5 To cancel the recording, press CLEAR. 6 To end, pre
Resumen del contenido incluido en la página 15
Other Functions Switching the status display off or on Selecting the sound channel Along with the on screen menu, the status display also displays information on the current operating status (counter, playback, You can select the desired sound channel during playback or recording,TV channel, etc.) on the TV screen.You can switch while receiving TV channels via the DVD/ VCR.This allows you off the information about the operating status so that the sta- to select a desired language for multi-langu
Resumen del contenido incluido en la página 16
Playing a Disc CD VCD DVD-V DVD-V MP3 JPEG Basic Playback Disc Menus 1 Press DVD, then DISC/VCR MENU. Getting Started • The DVD main menu will appear. Turn on the power of the TV, amplifier and any other compo- 2 If the feature is not available,“ ” symbol may appear on nents which are connected to the DVD/VCR. the TV screen. Make sure the TV and audio receiver (commercially available) 3 If disc menu is available on the disc, audio language, subtitle options, are set to the correct channel. chapt
Resumen del contenido incluido en la página 17
Playing a Disc VCD Using 3 3 buttons. DVD-V Slow Forward / Slow Reverse During playback, press 3 to go to the next chapter. Press it repeatedly 1 During playback, press PAUSE k. to skip subsequent chapters. Press 3 to go back to the beginning of the 2 Press g or h . current chapter. Press it repeatedly to go back to the previous chapter. • Slow motion playback will begin and sound will be muted. 3 Press g or h repeatedly to select the required speed. CD VCD DVD-V Time Search Slow forward or reve
Resumen del contenido incluido en la página 18
Playing a Disc - The system can recognize up to 255 groups/ folders and CD MP3 JPEG Program up to 512 tracks/ files, and this applies even to the case You may determine the order in which tracks will be played. where mixed MP3 and JPEG files are recorded. 1 In stop mode, press MODE. - Up to 8 hierarchies can be created. • The PROGRAM screen will appear. - If a JPEG file is selected, the image will be reproduced 2 Press ▲ or ▼ to select a from the selected track and go to the next one in turn. tr
Resumen del contenido incluido en la página 19
Playing a Disc DVD-V DVD-V Subtitle Language Parental Control The DVD/VCR allows you to select a language for subtitle dur- Parental Control limits the DVD viewing that exceeds your ing DVD disc (if available) playback. settings.The password is required to change the “PARENTAL 1 Press DVD, then SUBTITLE during playback. LEVEL”. 2 Press SUBTITLE repeatedly to select your desired subtitle lan- This feature prevents your children from viewing inappropriate guage. materials. • The selected language
Resumen del contenido incluido en la página 20
DVD Setup 5 Press K or L to select a setting, then press OK. Audio Setting • If OTHER is selected in the AUDIO, SUBTITLE or DISC Choose the appropriate Audio settings for your equipment as it MENU screen, press four-digit number to enter the code for only affect during the playback of DVD discs of the DVD/VCR. the desired language. (Refer to the language code list on back 1 Press SYSTEM MENU in stop mode. inside cover). 2 Press B to select CUSTOM, then press OK. • Only the languages supported by
