Manual de instrucciones de Human Touch HT-5020

Resumen del contenido incluido en la página 1

November 22, 2010
REPLACING THE ARMREST
HT-5020
®
It is imperative that Human Touch products are repaired in a manner that ensures product safety and regulatory compliance and that is fully consistent with the practices used
during the manufacturing process. Therefore, Human Touch requires that all product repairs are performed using only factory-new parts and in accordance with these repair SERVICE LEVEL: 3
instructions. Failure to adhere to these instructions voids the product warranty and re

Resumen del contenido incluido en la página 2

INSTALLING THE NEW ARMREST 1. Align the armrest post with the corresponding fittings on the chair frame (Fig.3). 2. Align the metal shift lever rod with the plastic bushing on the armrest, then insert the rod into the bushing as you push the armrest downward into position (Fig.4). 3. Replace the two Allen screws/washers you removed earlier to secure the armrest to the chair. 4. Plug in the chair, power it on, then verify that the recline lever is working properly. If it is not, the shift le