Manual de instrucciones de Harbor Freight Tools HAULMASTER 97214

Resumen del contenido incluido en la página 1

3 point Quick hitch
Model 97214
Set up And operA ting inStructionS
Diagrams within this manual may not be drawn proportionally.
Due to continuing improvements, actual product may differ slightly from the product described herein.
®
distributed exclusively by harbor Freight t ools .
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our website at: http://www.harborfreight.com
read this material before using this product.
Failure to do so can result in serious injury.
SAVe thiS MAnuAl.
© ®
Co

Resumen del contenido incluido en la página 2

SAVe thiS MAnuAl Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference. iMport Ant SAFetY inForMA tion in this manual, on the labeling, and all other information provided with this product: this i

Resumen del contenido incluido en la página 3

WArning! read all instructions Failure to follow all instructions listed below may result in serious injury. SAVE THESE INSTRUCTIONS Work AreA SAFetY 1. keep children and bystanders away while operating. distractions can cause you to lose control. 2. Keep work area clean and well lit. Cluttered or dark areas invite accidents. perSonAl SAFetY 1. Wear AnSi-approved safety goggles, nioSh-approved dust mask/ respirator, and work gloves during use and service. 2. Stay alert and use common sense

Resumen del contenido incluido en la página 4

Ser Vice 1. Have product serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the product is maintained. 2. Maintain labels and nameplates on the product. These carry important safety information. If unreadable or missing, contact Harbor Freight Tools for a replacement. MiScellAneouS 1. For off-road use only. 2. Hitch connections need to be capable of supporting the weight of the Hitch and attached implement, plus load. 3. The

Resumen del contenido incluido en la página 5

SpeciFicA tionS Capacity Fits most Category 1 Tractors up to 45 HP. Distance Between Arms 27-1/2” Maximum Weight Capacity: 2000 lbs., dependent on tractor’s hitch capacity. unp Acking When unpacking, check to make sure that the item is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible. Set up inStructionS read the entire iMport Ant SAFetY inForMA tion section at the beginning of this

Resumen del contenido incluido en la página 6

4. Insert the implement’s lower mounts inside the hitch hooks, and lock by pressing down the latch handles. 5. Check that all connections are tight before starting the work task. 6. If the tractor has stabilizer arms, they will not fit into the Quick Hitch mounting area along with the lift arms. Use stabilizer chains, or some other longer Mounting Pin (neither included) to fasten the Quick Hitch to the tractor. latch handle t op Bracket latch handle t op hook clevis pin (4) r pin (4) lower h

Resumen del contenido incluido en la página 7

t op Bracket Adapter Bracket (not included) link pins (not included) implement t ractor center link Quick hitch MAintenAnce And Ser Vicing damaged products can fail, causing personal injury. do cAution not use a damaged product. if abnormal noise or vibration occurs, have the problem corrected before further use. cleaning, maintenance, and lubrication 1. BeFore eAch uSe, inspect the general condition of the product. Check for loose screws, misalignment or binding of moving parts, cracked

Resumen del contenido incluido en la página 8

pleASe reAd the FolloWing cAreFull Y THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLy DIAgRAM IN THIS MANUAL AS A REFERENCE TOOL ONLy. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANy REPRESENTATION OR WARRANTy OF ANy KIND TO THE BUyER THAT HE OR SHE IS QUALIFIED TO MAKE ANy REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANy PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR ExPRESSLy STATES THAT ALL REPAIRS AND PARTS REPLACE

Resumen del contenido incluido en la página 9

liMited 90 dAY WArrAntY Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper installati