Manual de instrucciones de Philips MCL707

Resumen del contenido incluido en la página 1

1
Quick Start Guide
2
User Manual
MCD 700
MCL 707
Quick start guide
MCL707
MCD700
What’s in the Box?
You should find these items upon opening the box.
Composite Video Cable FM and MW antenna Remote Control
Quick Start Guide Control Cable
User Manual
MCD700 QUG_Eng-55 1 2005.5.18, 2:57 PM

Resumen del contenido incluido en la página 2

1 Connect the speakers to the SPEAKERS (8ohm) terminals with two speaker cables. Right speaker to "R" and left speaker to "L", red wire to "+" and silver wire to "–". 2 For radio reception, connect the supplied MW loop antenna wires to the AM AERIAL jack. Tip It is unnecessary to connect the FM pigtail antenna since it is fixed to the main unit. Connect the serial port marked CONTROL CABLE at the rear of the DVD player to the same port at the 3 rear of the power amplifier with the supplied contr

Resumen del contenido incluido en la página 3

Setting up the TV 1 Press STANDBY ONB on the front panel of the DVD player or B on the remote to switch the DVD system on and then select the disc source. MCD700 DVD/RECEIVER/POWER AMPLIFIER STANDBY-ON STANDBY-ON IR SENSOR 2 Switch on the TV set and set to the correct video-in channel until the blue Philips DVD background screen appears on the TV. Tip See your TV manual for more details. Setting TV type and preferences 1 Press SYSTEM on the remote to enter the system menu. Press 1 2 on the rem

Resumen del contenido incluido en la página 4

Loading a disc 1 Select the disc source, then press OPEN•CLOSE at the top of the DVD player or 0 on the remote. Load in a DVD disc with the label side facing up. 2 3 A disc menu pops up. Playback 1 Use 1 2 3 4 and OK or Numeric Keypad (0-9) on the remote to select a playback feature or item. Tip Refer to the User Manual for playback of other types of discs. 2 Press PRESET/ÉÅ (orÉÅ on the remote) to start playback. Types of Discs used on this DVD System Type Record Playback Edit DVD+RW DVD VIDEO