Resumen del contenido incluido en la página 1
DVD Player
DVD Player
DVD-FP580 / FP580W
DVD-F1080 / F1080W
www.samsung.com/ca
CA CA
AK68-01503G(01)
Resumen del contenido incluido en la página 2
Important Safety Instructions Read these operating instructions carefully before using the unit. Follow all the safety instructions listed below. Keep these operating instructions handy for future reference. 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings, Install in accordance with the manufacturer's instructions. 8) Do not ins
Resumen del contenido incluido en la página 3
Precautions This symbol indicates that This symbol indicates that there are dangerous voltage consisting a risk important operating and of electric shock is present within maintenance instructions in the this unit. literature accompanying this unit. Do not install this equipment in a confined space such as a bookcase or similar unit. WARNING : • To prevent damage which may result in fire or electric shock hazard, do not expose this appliance to rain or moisture. • If this power supply is used
Resumen del contenido incluido en la página 4
CAUTION THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVER AND DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL. Note: • This unit can be used only where the power supply is AC 120V, 60Hz. It cannot be used elsewhere. • This DVD player is designed and manufactured to respond to the Region Management Information. If the Region number of a DVD disc
Resumen del contenido incluido en la página 5
Before you start Accessories Video/Audio A Battery for AC-IN Cable Remote Control User’s Manual Cable Remote Control (CR2025) Install Batteries in the Remote control 1 Open the battery cover on the bottom side of the remote control. 2 Insert a battery (CR2025). Make sure that the polarities (+ and -) are aligned correctly. 3 Replace the battery cover. If the remote control doesn’t operate properly: - Check the polarity + - of the battery. - Check if the batteries are drained. - Check if t
Resumen del contenido incluido en la página 6
TABLE OF CONTENTS Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Before you start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Chapter 1: Setup General Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Resumen del contenido incluido en la página 7
Setup Chapter 1 SETUP Note General Features - Discs which cannot be played with this player. Excellent Sound • DVD-ROM • DVD-RAM Dolby Digital, a technology developed by Dolby • CD-ROM • CDV Laboratories, provides crystal clear sound • CDI • CVD reproduction. • Super Audio CD (except CD layer) Screen • CDGs play audio only, not graphics. Both regular and widescreen(16:9) pictures can be - Ability to play back may depend on recording viewed. conditions. Slow Motion • DVD-R, +R An important sce
Resumen del contenido incluido en la página 8
SETUP Disc Type and Characteristics This DVD player is capable of playing the following types of discs with the corresponding logos: Disc Types (Logos) Recording Types Disc Size Max. Playing Time Characteristics - DVD contains excellent sound and Single-sided 240 min. DVD 5” video due to Dolby Digital and Double-sided 480 min. Audio MPEG-2 system. + - Various screen and audio functions Video Single-sided 80 min. 3 1/2” can be easily selected through the Double-sided 160 min. on-screen menu. AU
Resumen del contenido incluido en la página 9
Setup SETUP Description Front Panel Controls 1. STANDBY/ON () 5. SKIP() / SEARCH Use to reverse skip a scene or music.. When STANDBY/ON is pressed on, the indicator goes out and the player is turned on. 6. STOP() 2. STANDBY Indicator Stops disc play. When the unit is first plugged in, the indicator lights. 7. PLAY/PAUSE () 3. DISC TRAY Begin or pause disc play. Place the disc here. 8. SKIP() / SEARCH 4. OPEN/CLOSE () Use to forward skip a scene or music. Press to open and close the disc tray. R
Resumen del contenido incluido en la página 10
SETUP Rear Panel (DVD-F1080) 1. DIGITAL AUDIO OUT JACKS 4. VIDEO OUT JACK - Use coaxial digital cable to connect to a compatible - Use a video cable to connect to the Video input jack on Dolby Digital receiver. your television. - Use coaxial digital cable to connect to an A/V Amplifier 5. AC IN JACK that contains a Dolby Digital, MPEG2 or DTS decoder. - Use AC IN cable(Included) to connect this jack into the 2. COMPONENT VIDEO OUT JACKS power outlet. - Use these jacks if you have a TV with Compo
Resumen del contenido incluido en la página 11
Setup SETUP Tour of the Remote Control 1. STANDBY/ON Button Turns the power on or standby. 2. NUMBER Buttons 1 12 13 3. DISC MENU (NUMBER 4) Button 2 Brings up the Disc menu. 3 14 4. ZOOM (NUMBER 7) Button 4 Enlarge DVD Picture. 15 5. INFO Button 16 5 17 Displays the current disc mode. 6 6. SEARCH Buttons ( ) / 18 7 Allow you to search forward/backward through a disc. 8 7. STOP Button ( ) 19 9 8. SKIP Buttons ( ) / 10 Use to skip the title, chapter or track. 9. MENU Button 11 20 Brings up the DV
Resumen del contenido incluido en la página 12
Chapter 2 CONNECTIONS Choosing a Connection The following shows examples of connections commonly used to connect the DVD player with a TV and other components. Before Connecting the DVD Player - Always turn off the DVD player, TV, and other components before you connect or disconnect any cables. - Refer to the user’s manual of the additional components (such as a TV) you are connecting for more information on those particular components. Connecting to a TV with HDMI Jack (DVD-F1080 only) 1 Using
Resumen del contenido incluido en la página 13
Connections CONNECTIONS HDMI VIDEO Specifications - Depending on your TV, certain HDMI output resolutions may not work. - Please refer to the user's manual of your TV. - If an HDMI or HDMI-DVI cable is plugged into TV, the DVD player’s output is set to HDMI automatically about 10 seconds later. - For better picture quality, set the HDMI output resolution to 720p, 1080i or 1080p . - This player upconverts regular DVDs for playback on 1080p TVs. It does not play HD DVDs or Blu-Ray discs. - If you
Resumen del contenido incluido en la página 14
CONNECTIONS Connecting to a TV (Progressive) 1 Using Component video cables (not included), connect the COMPONENT VIDEO OUT jacks on the rear of the DVD player to the COMPONENT IN jacks of your TV. RED GREEN 2 BLUE Using the audio cables, connect the AUDIO (red and white) OUT jacks on the rear of the DVD player to the AUDIO (red and white) IN jacks of your TV. Turn on the DVD player and TV. RED WHITE 3 Set the Video Output to P-SCAN in the Display Setup menu. Audio Cable (See pages 50 to 52) Co
Resumen del contenido incluido en la página 15
Connections CONNECTIONS Connecting to a TV (Interlace) - Connecting to your TV using Component video cables. - This is the best available connection if your TV is not capable of receiving a Progressive Scan signal. - You will enjoy excelllent quality and accurate color reproduction images. Component video separates the picture element into black and white(Y), blue(PB), red(PR) signals to present clear and clean images. (Audio signals are delivered through the audio output.) 1 Using Component vi
Resumen del contenido incluido en la página 16
CONNECTIONS Connecting to a TV (Video) 1 Using Video/Audio cables, connect the VIDEO (yellow)/AUDIO (red and white) OUT jacks on the rear of the DVD player to the VIDEO (yellow)/AUDIO (red and white) IN jacks of your TV. 2 Turn on your DVD player and TV. RED WHITE YELLOW Audio Video Cable Cable (Included) RED WHITE YELLOW 3 Press the input selector button on your TV remote control until the Video signal from the DVD player appears on the TV screen. Note - Noise may be generated if the audio cabl
Resumen del contenido incluido en la página 17
Connections CONNECTIONS Connecting to an Audio System (2 Channel Amplifier) 1 Using the audio cables, connect the AUDIO (red and white) OUT jacks on the rear of the DVD player to the AUDIO (red and white) IN jacks of the Amplifier. 2 Using the video signal cable(s), connect the VIDEO, COMPONENT or HDMI OUT jacks on the rear of the DVD player to the VIDEO, COMPONENT or HDMI-DVI IN jacl of your TV as described on pages 12 to 16. 3 RED WHITE Turn on your DVD player, TV, and Amplifier. Audio Cable
Resumen del contenido incluido en la página 18
CONNECTIONS Connecting to an Audio System (Dolby digital, MPEG2 or DTS Amplifier) 1 If using a Coaxial cable (not included), connect the DIGITAL AUDIO OUT (COAXIAL) jack on the rear of the DVD player to the DIGITAL AUDIO IN (COAXIAL) jack of the Amplifier. 2 Using the video signal cable(s), connect the VIDEO, COMPONENT or HDMI OUT jacks on the rear of the DVD player to the VIDEO, COMPONENT or HDMI-DVI IN jacks of your TV as described on pages 12 to 16. Coaxial Cable (not included) 3 Turn on you
Resumen del contenido incluido en la página 19
Basic Functions ▼ Chapter 3 BASIC FUNCTIONS Playing a Disc Before Play - Turn on your TV and set it to the Video Input your DVD player is connected to with your TV’s remote control. - If you connected the DVD player to an external Audio System, turn on your Audio System and set it to the correct Audio Input. After plugging in the player, the first time you press the DVD POWER button, the screen to the right appears: If you want to select a language, press a NUMBER button. (This screen will only
Resumen del contenido incluido en la página 20
▼ ▼ BASIC FUNCTIONS Note 4 - If the player is left in the stop mode for more than Stopping Play one minute without pressing any buttons, a Press the STOP ( ) button screen saver will be activated. Press the during play. PLAY/PAUSE ( ) button to resume normal play. - If the player is left in the stop mode for more than 30 minutes, the power will automatically turn off. 5 Removing the Disc Press the OPEN/CLOSE () button. Screen stops, no sound. To resume, press the PLAY/PAUSE ( ) button 6 once ag
