Manual de instrucciones de Harbor Freight Tools 45794

Resumen del contenido incluido en la página 1

DUST COLLECTOR
SYSTEM
Model 45794
ASSEMBLY AND OPERATING INSTRUCTIONS
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our Web site at http://www.harborfreight.com
Copyright © 2001 by Harbor Freight Tools. All rights reserved. No portion of this
manual or any artwork contained herein may be reproduced in any shape or form
without the express written consent of Harbor Freight Tools.
For technical questions and replacement parts, please call 1-800-444-3353

Resumen del contenido incluido en la página 2

Specifications Dimensions 19-1/2” W x 17-1/2” L x 13-1/4” H Weight .85 Lbs. Material 100% Cotton / Waterproof Material Thickness .021” Save This Manual You will need the manual for the safety warnings and precautions, assembly instructions, operating and maintenance procedures, parts list and diagram. Keep your invoice with this manual. Write the invoice number on the inside of the front cover. Keep the manual and invoice in a safe and dry place for future reference. Safety Warnings and Preca

Resumen del contenido incluido en la página 3

10. Use the right Dust Collector for the job. Do not attempt to force a small Dust Collector to adapt to a larger industrial Dust Collector. There are certain applications for which this Dust Collector was designed. Do not modify this Dust Collector and do not use this Dust Collector for a purpose for which it was not intended. 11. Stay alert. Watch what you are doing; use common sense. Do not use Dust Collector when you are tired. 12. Check for damaged parts. Before using Dust Colector, any

Resumen del contenido incluido en la página 4

Assembly Note: This Dust Collector fits perfectly on Harbor Freight Tool’s Universal Tool Stand, Sku# 7769. It may fit on other 10” Table Saw or Scroll Saw metal stands. 1. To fit onto tool stand, line up the snaps on the collector bag with base of your tool stand. Make a mark for each driled hole directly above each snap, all the way around the stand. If you wish, you can measure the distance between the snaps and lay out the marks accordingly. 2. Match a drill bit to the end of the snap re