Resumen del contenido incluido en la página 1
MODEL G0508
10 HP INDUSTRIAL
DUST COLLECTOR
OWNER'S MANUAL
COPYRIGHT © NOVEMBER, 2006 BY GRIZZLY INDUSTRIAL, INC.
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
#TS8335 PRINTED IN TAIWAN
Resumen del contenido incluido en la página 2
����������������������������������������������������������������������� �������������������������������������������������������������� ���������������������������������������������������������������������� �������������������������������������������������������������������� ������������������������ ������������������������������������������������������������������ �������������������������������������������������������������������� ���������������������������������������������������������������
Resumen del contenido incluido en la página 3
Table of Contents INTRODUCTION ............................................................................................................................... 2 Foreword .................................................................................................................................... 2 Contact Info ................................................................................................................................ 2 Machine Data Sheet ................................
Resumen del contenido incluido en la página 4
INTRODUCTION Foreword Contact Info We are proud to offer the Model G0508 10 HP If you have any comments regarding this manual, Industrial Dust Collector. This machine is part please write to us at the address below: of a growing Grizzly family of fine woodworking machinery. When used according to the guide- Grizzly Industrial, Inc. C lines set forth in this manual, you can expect /O Technical Documentation Manager years of trouble-free, enjoyable operation and P.O. Box 2069 proof of Grizzly’s
Resumen del contenido incluido en la página 5
Machine Data Sheet MACHINE DATA SHEET Customer Service #: (570) 546-9663 • To Order Call: (800) 523-4777 • Fax #: (800) 438-5901 MODEL G0508 10 HP INDUSTRIAL DUST COLLECTOR Product Dimensions: Weight .............................................................................................................................................................515 lbs. Length/Width/Height .............................................................................................................
Resumen del contenido incluido en la página 6
Bag Information Number of Upper Bags .................................................................................................................................... 4 Upper Bag Capacity .......................................................................................................................... 17.8 cu. ft. Lower Bag Capacity .......................................................................................................................... 13.7 cu. ft. Number of Low
Resumen del contenido incluido en la página 7
Identification E A F G B H C I D Figure 1. Dust collector, front view. A. Upper Filter Bag B. Collector C. Lower Collection Bag D. Caster E. Upper Bag Hanger Assembly F. Inlet G. ON/OFF Power Switch H. Motor I. Base -5- G0508 10 HP Industrial Dust Collector
Resumen del contenido incluido en la página 8
� � � �� � �� � �� � � � �� � � � �� � � � �� � � �� � � � � � � �� � � � �� � � � � � � �� � � �� � � � � � �� � � � � ��� � � � � � � � � �� � � � �� � � � � � � � � � �� � � � � � � �� � �� � � � � � �� � � � � � � �� � �� � �� � � � � � � �� � �� �� � � � � � � � � �� � �� � � � � � � � �� � � � � � � ���� � � � � �� � � � � �� � � � �� � � � � � �� �� � �� �� � � � � � �� � �� � � � � � � �� � � �� � � � � � �� � � � � �� � � � � � � � �� � �� � � � � � �� � � �� � � � � �� � �� � � � � � �
Resumen del contenido incluido en la página 9
Safety Instructions for Machinery � � � � � �� � � � � � � �� � � � �� � � �� � � � � � � � � � ��� ����� ������ �������� ���� ���� � ���� � � � � � � � � � � � � � � � � � � � � � � � � � �� � � � � � � � � � � � � � � � � � � � � � � � � � � � �� ���������� ����� �� ������ ��� ��������� ���� � � � � � � � � � � � � � � � � � � � � � � � � � � � �� � ����� ���� ���������� ��������� ������� ���� � ���������� ������������� ���� ����� ���� �������� ���� ���������� �� � ����������� ���� � � � � � �
Resumen del contenido incluido en la página 10
Additional Safety for Dust Collectors 1. MACHINE USE. Do not use this dust col- 6. AVOIDING FIRES. Do not allow steel to lector to pick up liquids and metal scrap strike against impeller—this may produce including, but not limited to, nails and filings. a spark. Sparks can smolder in wood dust Also, do not pick up material which cannot for a long time before fire or flame is detect- safely pass through the impeller such as ed. If metal contacts metal during opera- solid wood scraps. tio
Resumen del contenido incluido en la página 11
SECTION 2: CIRCUIT REQUIREMENTS 220/440V 3-Phase Grounding In the event of an electrical short, grounding reduces the risk of electric shock. The grounding wire in the power cord must be properly connected Serious personal injury could occur if you to the grounding prong on the plug; likewise, the connect your machine to the power source outlet must be properly installed and grounded. before you have completed the set up pro- All electrical connections must be made in accor- cess. DO NOT
Resumen del contenido incluido en la página 12
SECTION 3: SET UP Set Up Safety Items Needed for Setup The following items are needed to complete the This machine presents set up process, but are not included with your serious injury hazards machine: to untrained users. Read through this entire manu- Description Qty al to become familiar with • Assistant ........................................1 or more the controls and opera- • Safety Glasses (for each person) .............. 1 tions before starting the • Gloves (for each person) ....
Resumen del contenido incluido en la página 13
Inventory H After all the parts have been removed from the two boxes, you should have the following items: I Contents (Figure 2–4) Qty E A. Main Housing with Motor ............................ 1 B. Inlet ............................................................. 1 C. Collectors ................................................... 4 D. Supporting Legs ......................................... 4 G E. Base ........................................................... 1 F F. Hanger Supports .......
Resumen del contenido incluido en la página 14
Site Considerations Assembly Floor Load To the dust collector system: Refer to the Machine Data Sheet on Page 3 for 1. Place the base upside down on the floor. the weight and footprint specifications of your machine. Some floors may require additional 5 1 2. Attach the casters with the (16) ⁄16"-18 x ⁄2" reinforcement to support both the machine and flange bolts (see Figure 6). operator. Placement Location Consider existing and anticipated needs, size of material to be processed through ea
Resumen del contenido incluido en la página 15
5. Attach the supporting legs to the housing 10. With assistance, position and hold the collec- 5 1 bracket with ⁄16"-18 x ⁄2" flange bolts. tor so the holes in the collector flange match with those of the rubber gasket and main 6. Position the base on top of the supporting housing. legs (see Figure 8). 5 11. Insert and hand tighten one ⁄16"-18 x 1" 5 5 flange bolt, two ⁄16" flat washers, and one ⁄16"- 18 hex nut in all eight holes. 12. Tighten the eight flange bolts and nuts in a alternatin
Resumen del contenido incluido en la página 16
17. Slide the hanger into the hanger support, 20. Align the hanger assembly so that the hook aligning the two holes on each part. at the top is directly over the center of the col- lector. 1 18. Secure this hanger assembly with two ⁄4"-20 1 1 x ⁄2" flange bolts (see Figure 11). 21. Secure the hanger assembly with one ⁄4"-20 1 x ⁄2" flange bolt (see Figure 12). 22. Repeat Steps 18–22 for the remaining hang- er assemblies. Hanger 23. Place the loop at the top of the upper col- lection bag over
Resumen del contenido incluido en la página 17
Bag Clamp Collector Hook Figure 14. Upper filter bag secured to collector. Figure 15. Bottom collection bag snagged on collector hooks. 25. Slip the bottom of the bag over the top lip of the collector so that the bag clamp is com- 29. Wrap the bag clamp around the collector and pletely over the lip as well. position it between the bottom lip of the col- lector and the hooks, fasten the bag clamp to 26. Fasten the locking mechanism of the bag secure the bag to the collector (see Figure clamp
Resumen del contenido incluido en la página 18
2. Connect the dust collector to the proper power Test Run source (reference Circuit Requirements on Page 9). 3. Clear away from the machine all tools and objects used during the setup. Wear safety glasses 4. Turn the machine ON by pushing in the whenever starting or GREEN button on the power switch. using machine. Failure to comply may result in 5. Listen and watch for abnormal noises or serious personal injury. operation. The machine should run smoothly with little or no vibration or
Resumen del contenido incluido en la página 19
SECTION 4: DESIGNING THE SYSTEM Plastic duct is also a popular material for home General shops. However, be aware that there is a fire or explosion hazard if plastic duct material is used for dust collection without being grounded against The Model G0508 can be operated as either a sta- static electrical charge build-up. This topic will be tionary or mobile unit. There are advantages and discussed later in this section. Another problem disadvantages to both set-ups. The advantage of wit
Resumen del contenido incluido en la página 20
There are quite a number of options when it There are also many kinds of pure plastic flexible comes to metal duct, but metal duct that is spe- hose, such as non-perforated drainage type hose cially manufactured for dust collection is the best and dryer vent hose. Drainage type hose, while choice. When selecting your metal duct, choose being economical, does not quite have the flex- high quality metal duct with smooth welded inter- ibility required for dust collection. The inside of the nal