Resumen del contenido incluido en la página 1
INSTRUCTION MANUAL
750w
Dust Extractor/
Collector
• Melbourne • Perth • Auckland • Hong Kong • Shanghai
RDC100
• Taipei • New York • Verona • London • Paris
080530 RDC100 ED7
Resumen del contenido incluido en la página 2
Contents Full 2 Years Home Use Warranty
Warranty 2 Whilst every effort is made to ensure your complete Introduction 3 satisfaction with this tool, occasionally, due to the mass manufacturing techniques, a tool may not live up to our Environmental protection 3 required level of performance and you may need the assistance of our service department.
Description of symbols 3 This product is warranted for a 2-year period for home Specifications 3 domestic use from the date of the original purc
Resumen del contenido incluido en la página 3
Description of symbols Dear Customer
The rating plate on your tool may show symbols. These If you require any help with your product, whether it represent important information about the product or is a Warranty claim, spare part or user information, instructions on its use. please phone our Help Line for an immediate response. Wear hearing protection. Phone 1300 880 001 in Australia or 0800 445 721 in New Zealand.
Wear eye protection. Wear breathing protection. Introduction
Conforms t
Resumen del contenido incluido en la página 4
2. Consider the environment in which you are working. better and safer performance. Follow the instructions Do not use power tools in damp or wet locations. Keep regarding lubrication and accessory changes. Inspect the work area well lit. Do not expose power tools to tool cords periodically and, if damaged, have them rain. Do not use power tools in the presence of repaired by an authorised service facility. Inspect flammable liquids or gases. extension cords periodically and replace them if dama
Resumen del contenido incluido en la página 5
with grounded objects such as water pipes, radiators, Additional safety rules for dust extractors cookers, refrigerators and other metal surfaces.. • Do not pick up glass, water or metal 20. Use only approved parts. When servicing, use only • Keep hands well away from moving parts identical replacement parts. Use an authorised service • Periodically check that all nuts, bolts and other fixings facility to fit replacement parts. are properly tightened. WARNING. The use of an accessory or attachme
Resumen del contenido incluido en la página 6
10 Know your product 1. Fan housing 2. Anti-vibration bolt (x2) 3. Collector 4. Collector support bracket (x2) 9 5. Motor 6. Switch box assembly 7. Support pole 8. Base plate 9. Bag 10. Bag support 11. Inlet port 12. Caster (x4) 13. 3-way vacuum distributor 11 14. Large inlet hose (see note) 3 2 1 6 14 5 13 4 7 Note. The small end (98mm) connects to the 8 inlet port. The larger end (104mm) connects to the 12 3-way vacuum distributor. 6
Resumen del contenido incluido en la página 7
Assembly Collector support The Dust Extractor is shipped partly disassembled. brackets 1. Fix a bracket to the Casters base plate and then 1. Place the base plate to the collector. upside down and 2. Repeat for the other attach the four bracket. casters. Bag support 1. Attach the bag support to the Support pole collector. 1. Turn the base plate the right way round and attach the support pole. The right-angle plate needs to face the Bags shortest end of the 1. Fit both bags over base. the col
Resumen del contenido incluido en la página 8
Operation Maintenance CAUTION. Do not operate the extractor unless a hose is CAUTION. Always use a dust mask and safety goggles connected to the inlet port. when carrying out any maintenance operation on this tool. Switching on and off 1. Keep the tool’s air vents unclogged and clean at all 1. Connect the plug to the power supply. times. 2. Depress the ON button. 2. Remove dust and dirt regularly. Cleaning is best done 3. To switch off, depress the OFF button. with a soft rag or a soft brush. W
Resumen del contenido incluido en la página 9
Carefully read the entire Instruction Manual before using this product. With continuing product development changes may Before returning this product for a have occurred which render the product received Warranty Claim or any other reason slightly different to that shown in this instruction Please Call 1300 880 001 (Australia) manual. The manufacturer reserves the right to or 0800 445 721 (New Zealand) change specifications without notice. Note: Specifications may differ from country to
