Resumen del contenido incluido en la página 1
DISHWASHER
ZSF 6160
152963 09/0 Instruction Book
UK
Resumen del contenido incluido en la página 2
Contents Safety instructions 3 Installation instructions 20 Fitting under a counter 20 Disposal 3 Levelling 20 Water supply connections 20 Economical and ecological dishwashing 3 Water outlet hose connection 21 Description of the appliance 4 Electrical connection 21 The control panel 4 Hints for test centres 22 Prior to using for the first time 6 The water softener 6 Filling with salt 7 Rinse aid 8 In daily use 9 Loading cutlery and dishes 9 The lower basket 9 The cutlery basket 10 The upper bas
Resumen del contenido incluido en la página 3
Safety instructions It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is left with the appliance in order that the new owner can get to know the functioning of the appliance and the relevant safety information. This information has been provided in the interest of your safety. You MUST read it carefu
Resumen del contenido incluido en la página 4
Description of the appliance 1. Upper basket stop 2. Water hardness switch 3. Salt container 4. Detergent dispenser 5. Control panel 6. Rating plate 7. Rinse aid dispenser 8. Filters 9. Lower spray arm 10. Upper spray arm 11. Upper basket 12. Worktop IN144 The control panel Cancel Function push buttons: in addition to the dishwashing The digital display indicates: programme selected, the following functions can also be set - the level of hardness to which the water softener is set with the help
Resumen del contenido incluido en la página 5
Indicator lights: have the following meanings: Salt refilling indicator light: illuminates when the salt has run out. Rinse aid refilling indicator light: illuminates when the rinse aid has run out. The salt and rinse aid indicator lights are never illuminated while a washing programme is running even if filling with salt and rinse aid is necessary. Phase indicator lights: have the following meanings: Wash: illuminates when the washing and rinsing phases are running. Drying: illuminates when
Resumen del contenido incluido en la página 6
Prior to using for the first time Before using your dishwasher for the first time: b)Setting electronically (The dishwasher must be switched off) 1. Ensure that the electrical and water connections comply with the installation instructions The dishwasher is factory set at level 5. 2. Remove all packaging from inside the appliance 1. Press the On/Off push button. The On/Off indicator light 3. Set the water softener illuminates (setting mode). 4. Pour 1 litre of water inside the salt container
Resumen del contenido incluido en la página 7
Filling with salt Only use salt specifically designed for use in dishwashers. All other types of salt not specifically designed for use in a dishwasher, especially table salt, will damage the water softener. Only fill with salt just before starting one of the complete washing programmes. This will prevent any grains of salt or salty water, which may have been spilt, remaining on the bottom of the machine for any period of time, which may cause corrosion. To fill: 1. Open the door, remove the lo
Resumen del contenido incluido en la página 8
If you are using dishwasher detergent that already contains Rinse aid rinse aid, it is necessary to deactivate the dosage of rinse Rinse aid is automatically added during the last rinse, ensuring aid, in order to avoid a double dosage. thorough rinsing, and spot and streak free drying. The dispenser, which is positioned inside the door, holds about Deactivation/activation of the dosage of 110 ml of rinse aid, which is sufficient for 16 - 40 dishwashing programmes, depending upon the dosage
Resumen del contenido incluido en la página 9
In daily use Check if it’s necessary to refill with dishwasher salt or rinse Loading cutlery and dishes aid Sponges, household cloths and any object that can Load cutlery and dishes into the dishwasher. absorb water may not be washed in the dishwasher. Fill with dishwasher detergent . Before loading the dishes, you should: Select a wash programme suitable for the cutlery and - Remove large left-overs. dishes. - Soften remnants of burnt food in pans Start the wash programme. When
Resumen del contenido incluido en la página 10
The cutlery basket The upper basket The upper basket is designed for plates (dessert plates, Long bladed knives stored in an upright position are a saucers, dinner plates of up to 24 cm in diameter), salad potential hazard. bowls, cups and glasses. Long and/or sharp items of cutlery such as carving knives must be positioned horizontally in the upper basket. Arrange items on and Take care when loading or unloading sharp items such as underneath the cup racks so knives. that water can reach all
Resumen del contenido incluido en la página 11
Adjusting the height of the upper basket Use of detergent If washing very large plates you can load them in the lower Only use detergents specifically designed for use in basket after moving the upper basket to the higher position. dishwashers. We recommend the use of Finish detergents. Maximum height of the dishes in Using no more then the correct amount of detergent upper basket lower basket contributes to reducing pollution. With upper basket raised 20 cm 31 cm Please observe the manufactur
Resumen del contenido incluido en la página 12
Different kinds of detergent Detergent tablets Use of "3 in 1" combi detergents Detergent tablets of different brands dissolve at different General advice speeds. For this reason some detergent tablets cannot These products are detergents with integrated and combined dissolve and develop their full cleaning power during short detergent/rinse-aid and salt functions. programmes. Therefore please use long programmes when using detergent tablets, to ensure the complete removal of 1. Before using the
Resumen del contenido incluido en la página 13
Washing programmes Programme Degree of soil Press the Cycle description (3) Consumption values and programme Programme Energy Water type of load push button duration consumption consumption (in minutes) (in kWh) (in litres) Hot prewash Main wash up to 70°C Heavy soil. Intensive 2 warm rinses Intensive 70°C Crockery, cutlery, 80 - 90 1,7 - 1,9 23 - 25 70° 1 hot rinse pots and pans Drying Cold prewash Auto Main wash up to 65°C or 50°C Automatic Normal soil. 1 or 2 cold rinses matic 92 - 115 1,1
Resumen del contenido incluido en la página 14
Starting a washing programme 1. Check that the baskets have been 6. To interrupt or cancel a washing loaded correctly and that the spray programme in progress arms can rotate freely Interrupt or cancel a washing programme in progress ONLY if it’s absolutely necessary. 2. Turn on the water tap Attention! Hot steam may escape when the door is opened. Open the door carefully. 3. Close the dishwasher door To interrupt a washing programme a) Open the dishwasher door; the programme will stop. 4.
Resumen del contenido incluido en la página 15
Maintenance and cleaning Clean the external surfaces of the machine and control panel Attention! with a damp soft cloth. If necessary use only neutral Under no circumstances may the dishwasher be used without detergents. Never use abrasive products, scouring pads or filters. solvent (acetone, trichloroethylene etc....). Incorrect repositioning and fitting of the filters will produce Ensure that the seals around the door, the detergent and rinse poor washing results. aid dispensers are cleaned r
Resumen del contenido incluido en la página 16
What to do, when... Certain problems are due to the lack of simple maintenance or oversights, which can be solved with the help of the instructions given here, without calling out an engineer. ...a flashing fault code appears The intervention of an alarm is indicated by: - indicator light of the programme in progress is flashing - a fault code visible in the digital display. Open the door and carry out the following suggested corrective actions (see following chart). Important: If you call out
Resumen del contenido incluido en la página 17
...the wash results are not satisfactory The dishes are not clean The wrong washing programme has been selected. The dishes were arranged in such a way as to stop water reaching all parts of the surface. The baskets must not be overloaded. The spray arms do not rotate freely due to wrong arrangement of the load. The filters in the base of the washing compartment are dirty or incorrectly positioned. Too little or no detergent has been used. Where there are limescales deposits on the d
Resumen del contenido incluido en la página 18
Service and Spare Parts In the event of your appliance requiring service, or if you wish to purchase spare parts please contact your local Service Force Centre by telephoning: 08705 929929 Your telephone call will be automatically routed to the Service Force Centre covering your post code area. For the address of your local Service Force Centre and further information about Service Force, please visit the website at www.serviceforce.co.uk Before calling out an engineer, please ensure you read t
Resumen del contenido incluido en la página 19
Guarantee Conditions Standard Guarantee Conditions European Guarantee We, Zanussi-Electrolux, undertake that if within 12 months of If you should move to another country within Europe then your the date of purchase this ZANUSSI-ELECTROLUX appliance guarantee moves with you to your new home subject to the or any part thereof is proved to be defective by reason only of following qualifications: faulty workmanship or materials, we will, at our option repair or The guarantee starts from the date y
Resumen del contenido incluido en la página 20
570 - 600 600 Installation instructions Any electrical and/or plumbing work required to install Water supply connections this appliance should be carried out by a qualified This dishwasher must be plumbed into a cold water supply. electrician and/or plumber or competent person. For making the connection itself, the coupling nut fitted to the Remove all packaging before positioning the machine. machine’s supply hose is designed to screw onto either a 3/4" If possible, position the machine next t
