Manual de instrucciones de Viking SQRG-12

Resumen del contenido incluido en la página 1

SQRG-12
SQRG-12
TECHNICAL
TECHNICAL
Sequential Ring
Generator
Practice
Practice
July 28, 2006
TELECOM SOLUTIONS FOR THE 21ST CENTURY
TELECOM SOLUTIONS FOR THE 21ST CENTURY
Allow Multiple Attendants to Answer Sequenced
Calls While Eliminating Call Crashing
The SQRG-12 Sequential Ring Generator is
designed for applications where more than
one person answers incoming calls and
those persons may be in locations where the
TMS-6X or TMS-12A is not visible.
The SQRG-12 eliminates confusion about
which

Resumen del contenido incluido en la página 2

IF YOU HAVE A PROBLEM WITH A VIKING PRODUCT, PLEASE CONTACT: VIKING TECHNICAL SUPPORT AT (715) 386-8666 Our Technical Support Department is available for assistance Monday 8am - 4pm and Tuesday through Friday 8am - 5pm central time. So that we can give you better service, before you call please: 1. Know the model number, the serial number and what software version you have (see serial label). 2. Have your Technical Practice in front of you. 3. It is best if you are on site. RETURNING PRODUCT FOR

Resumen del contenido incluido en la página 3

Rear View of the SQRG-12 2. Wiring Table for the TMS-6X 12 11 ROW 1 ROW 2 ROW 3 ROW 4 ROW 5 ROW 6 10 9 Loop/Ground Start TMS-6X SQRG-12 Open SQRG-12 Loop/Ground Start Pin, Color Pin, Color C.O. Lines C.O. Lines 1T L1, G 26, W/BL 38, BK/G 1T 1R L1, R 1, BL/W 13, G/BK 1R L2, BK 27, W/O 39, BK/BN 2T 2T 2R L2, Y 2, O/W 14, BN/BK 2R 3T L3, W 28, W/G 40, BK/S 3T 3R L3, BL 3, G/W 15, S/BK 3R 4T L4, G 29, W/BN 41, Y/BL 4T 8 7 L4, R 4, BN/W 16, BL/Y 4R 6 4R 5 4 5T L5, BK 30, W/S 42, Y/O 5T 3 2 1 5R L5, Y

Resumen del contenido incluido en la página 4

Notes: If the PABX does not recognize lines on the TMS-12A as busy and call crashing is observed, set up those lines as “incoming only trunks” on the PABX. If those lines must be used for inbound and outbound calls, set DIP switch 3 to on and switch 2 to off, on the TMS-12A. Do not install bridging clips on any connections which connect the two halves of the punch down terminal block. Bridge clips should only be installed as a method of bypassing equipment. In order for the SQRG-12 to work prope