Resumen del contenido incluido en la página 1
156998841.qxp 12/13/2006 3:33 PM Page 1
User
manual
Dishwasher
52C850
Resumen del contenido incluido en la página 2
156998841.qxp 12/13/2006 3:33 PM Page 2 Content Safety information - - - - - - - - - - - - - - - - - - -3 Control panel and functions - - - - - - - - - - - -5 Programme table - - - - - - - - - - - - - - - - - - -6 Before the first use - - - - - - - - - - - - - - - - - -7 Filling with rinse aid - - - - - - - - - - - - - - - - - -7 Adjusting the dosage of rinse aid - - - - - - - -8 Loading cutlery and dishes - - - - - - - - - - - -8 Filling with detergent - - - - - - - - - - - - - - - -11 Unloa
Resumen del contenido incluido en la página 3
156998841.qxp 12/13/2006 3:33 PM Page 3 Safety information In the interest of your safety and to ensure correct use, before installing and first using the appliance, read this user manual carefully, including its hints and warnings. To avoid unnecessary mistakes and accidents, it is important to ensure that all people using the appliance are thoroughly familiar with its operation and safety features. Save these instructions and make sure that they remain with the appliance if it is moved or s
Resumen del contenido incluido en la página 4
156998841.qxp 12/13/2006 3:33 PM Page 4 Installation ● Check your dishwasher for any transport damage. Never connect a damaged machine. If your dishwasher is damaged contact your supplier. ● All packaging must be removed before use. ● Any electrical and plumbing work required to install this appliance must be carried out by a qualified and competent person. ● For safety reasons it is dangerous to alter the specifications or attempt to modify this product in any way. ● Never use the dishwasher
Resumen del contenido incluido en la página 5
156998841.qxp 12/13/2006 3:34 PM Page 5 Control panel and functions Finished light Program selector dial and Start/Cancel button On/Off switch ● when in this position, the machine is switched off (corresponding light off), Program selector dial ● when the marker on the dial corresponds with a program, the machine and On/Off switch is switched on and a program is selected (corresponding light on) ● Starting the washing program: 1. Select a washing program. 2. Press the Start/Cancel button (co
Resumen del contenido incluido en la página 6
156998841.qxp 12/13/2006 3:34 PM Page 6 Program table Program Use Cycle description Pots Heavy soil. Prewash - Main wash Crockery, cutlery, 2 intermediate rinses - pots and pans Final rinse - Dry Regular Plus Normal soil. Prewash - Main wash Crockery and cutlery 2 intermediate rinses - Use this program for maximum performance Final rinse - Dry Quick 30 Light soil. Main wash- Crockery and cutlery Final rinse Or half load of Normal soil Regular Eco Normal soil. Prewash - Main wash Crockery and
Resumen del contenido incluido en la página 7
156998841.qxp 12/13/2006 3:34 PM Page 7 Before the first use When using separately rinse aid and detergent: - fill up the rinse aid dispenser with rinse aid - fill up the detergent dispenser with detergent When using tablets that integrate rinse aid and detergent: - there is no need to fill up with rinse aid: place the tablets in the detergent dispenser. When using detergent, rinse aid or tablets, follow the manufacturers instructions. IMPORTANT! If the drying results are not satisfactory
Resumen del contenido incluido en la página 8
156998841.qxp 12/13/2006 3:34 PM Page 8 Adjusting the dosage of rinse aid Increase the dose if there are drops of water or Reduce the dose if there are whitish streaks lime spots on the dishes after washing. on the dishes or a bluish film on glassware or knife blades. Open the lid. Set the dosage level. Close the lid and press (The dose is factory set until it locks. in position 4). Loading cutlery and dishes ● The following items are not suitable for use ● When loading the dishwasher, make s
Resumen del contenido incluido en la página 9
156998841.qxp 12/13/2006 3:34 PM Page 9 Load cutlery. Place knives and other Load the lower basket. For best results we items of cutlery with Arrange serving dishes and large lids around the recommend you to use sharp points or edges edge of the basket. the cutlery grid provided with their handles facing (if the size and upwards. dimensions of the Risk of injury! cutlery allow it). Load upper basket. For taller items, the cup If plates are to be loaded in the upper basket: Light items (plast
Resumen del contenido incluido en la página 10
156998841.qxp 12/13/2006 3:34 PM Page 10 Adjusting the height of the upper basket If washing very large Maximum height of the dishes in: plates you can load them upper basket lower basket in the lower basket after With upper basket raised 20 cm 31 cm moving the upper basket to the higher position. With upper basket lowered 24 cm 27 cm IMPORTANT! Only adjust the height when the upper basket is empty. When the basket is in the higher position you will not be able to use the cup racks. Move t
Resumen del contenido incluido en la página 11
156998841.qxp 12/13/2006 3:34 PM Page 11 Filling with detergent IMPORTANT! Only use detergents suitable for dishwashers. Observe the manufacturer’s dosing and storage recommendations. Open the lid. Observe the dosing Fill in the detergent in levels. compartment A. For programmes with When using detergent Close the lid. prewash add an tablets: additional detergent place detergent tablets dose in compartment B. in compartment A. Unloading the dishwasher IMPORTANT! ● Empty the lower basket first
Resumen del contenido incluido en la página 12
156998841.qxp 12/13/2006 3:34 PM Page 12 Cleaning and Care Cleaning the filters IMPORTANT! NEVER use the dishwasher without filters as this may result in damage to the appliance. Incorrect repositioning and fitting of the filters will produce poor washing results. Remove filter A from the The dishwasher must Clean filters A, B and C Turn the handle about 1 4 base of the washing be switched off thoroughly under / turn anticlockwise compartment. running water. and remove filters B and C. IMPORT
Resumen del contenido incluido en la página 13
156998841.qxp 12/13/2006 3:34 PM Page 13 External cleaning Frost precautions Clean the external surfaces of the machine and Avoid placing the machine in a location where control panel with a damp soft cloth. If the temperature is below 0°C. If this is necessary use only neutral detergents. Never unavoidable, empty the machine, close the use abrasive products, scouring pads or appliance door, disconnect the water inlet pipe solvent (acetone, trichloroethylene etc....). and empty it. Ensure t
Resumen del contenido incluido en la página 14
156998841.qxp 12/13/2006 3:34 PM Page 14 Something not working IMPORTANT! The dishwasher will not start or stops during operation. Certain problems are due to the lack of simple maintenance or oversights, which can be solved with the help of the indications described in the chart, without calling out a service technician. Switch off the dishwasher, open the door and carry out the following suggested corrective actions. Fault code / malfunction Possible cause Solution The water tap is blocked
Resumen del contenido incluido en la página 15
156998841.qxp 12/13/2006 3:34 PM Page 15 The wash results are not satisfactory ● The wrong washing program has been selected. The dishes are not clean ● The dishes were arranged in such a way as to stop water reaching all parts of the surface. The baskets must not be overloaded. ● The spray arms do not rotate freely due to wrong arrangement of the load. ● The filters in the base of the washing compartment are dirty or incorrectly positioned. ● Too little or no detergent has been used. ● The
Resumen del contenido incluido en la página 16
156998841.qxp 12/13/2006 3:34 PM Page 16 Technical data DimensionsWidth 60 cm Height 85 cm Depth (including control panel) 61 cm Electrical connection Information on the electrical connection is given on the rating plate on Voltage - Overall power - Fuse the inner edge of the dishwasher’s door. Water supply pressure Minimum 50 kPa (7 psir) Maximum cold water 800 kPa (116 psi) Maximum hot water 350 kPa (51 psi) Capacity 12 place settings Max. weight 41 Kg Noise level 53 dB (A) Consumption valu
Resumen del contenido incluido en la página 17
156998841.qxp 12/13/2006 3:34 PM Page 17 Hints for test institutes Testing in accordance with AS/NZS 2007 must be carried out with the appliance fully loaded and using the test programme (see "Consumption values"). The rinse aid dispenser must be filled and the door must be opened at the end of cycle for 30 minutes for drying assessment. Full load: 12 standard place settings Amount of detergent required: 5 g + 25 g (AS/NZS) Rinse aid setting: position 4 (AS/NZS) Cutlery basket Upper basket Cu
Resumen del contenido incluido en la página 18
156998841.qxp 12/13/2006 3:34 PM Page 18 Installation WARNING! Any electrical and/or plumbing work required to install this appliance should be carried out by a qualified electrician and/or plumber or competent person. Water connection WARNING! WARNING! This dishwasher may be fed with either hot Always use a new hose-set when connecting (max. 60°) or cold water. Nevertheless we the appliance to the water mains. An old hose- recommend connection to a cold water supply. set must not be reused
Resumen del contenido incluido en la página 19
156998841.qxp 12/13/2006 3:34 PM Page 19 Remove internal membrane from drain spigot. Ensure that the hoses When connecting the drain hose to an under sink are not kinked, crushed trap spigot, the entire plastic membrane must be or entangled. removed. Failure to remove all the membrane will result in food particles building up over time eventually blocking the dishwasher drain hose spigot. Electrical connection WARNING! WARNING! ● Safety standards require the appliance to be Ensure that the di
Resumen del contenido incluido en la página 20
156998841.qxp 12/13/2006 3:34 PM Page 20 Fitting under a counter By removing the dishwasher’s worktop, you Be sure that once the appliance has been can install it under a close fitting sink unit or a installed, it is easily accessible for the service pre-existing top. engineer in the event that a repair is required. Unscrew the two screws Push the top backwards Lift top at the front and at the rear. about 1 cm. remove it. Levelling Good levelling is essential for correct closure and sealing o
