Manual de instrucciones de Panasonic KX-T7030

Resumen del contenido incluido en la página 1

Panasonic
Proprietary Telephone for
Electronic Modular Switching System
MODEL NO. KX-17030
Illustrated Model: White 1
KX-T7030 is compatible with all of the Panasonic Electronic Modular
Switching Systems and can perform most functions within each system.
Please read before use.

Resumen del contenido incluido en la página 2

Important Safety Instructions When using your telephone surface. This product should equipment, basic safety never be placed near or over precautions should always be a radiator or heat register. followed to reduce the risk of fire, This product should not be electric shock and injury to placed in a built-in installation persons, including the following: unless proper ventilation is provided. 1. Read and understand all instructions. 7. Do not allow anything to rest on the telephone cor

Resumen del contenido incluido en la página 3

11. Unplug this product from the restore the product to wall outlet and refer servicing normal operation. to qualified service personnel E. If the product has been under the following conditions: dropped or the cabinet has been damaged. A. When the power supply F. If the product exhibits a cord or plug is damaged or distinct change in frayed. performance. B. If liquid has been spilled into the product. 12. Avoid using a telephone C. If the product has been (other than a cordless t

Resumen del contenido incluido en la página 4

Thank you for purchasing the Panasonic Telephone. Table of Contents ................. .I Important safety instructions . Connection ............................... .4 Initial setting ............................. ........................ .5 Location of controls .7 Using overlay ............................. .................... .8 Installing the card holder .9 Wall mounting ............................ ....................... 10 Important information .......... Back cover Acce

Resumen del contenido incluido en la página 5

Initial setting I- HANDSET VOLUME Selector: To adjust the volume level of the handset. NORMAL: Normal voice HIGH: Loud voice RINGER VOLUME Selector: To adjust the volume level of the ringer. HIGH: Loud ringer LOW: Low ringer OFF: No ringer VOLUME Control: To adjust the volume level of the speaker volume. MAX: Loud voice MIN: Low voice MEMORY Switch: Set to “SET”. For station programming, set to “PROGRAM”. HANDSET/HEADSET Selector: Set to “HANDSET”. For connecting the headset,

Resumen del contenido incluido en la página 6

Location of controls ---a -@ -a --a 10 2 -0 -----a ----@ KX-T7030 is compatible with the Panasonic Electronic Modular Switching Systems and can perform most functions within each system. -5-

Resumen del contenido incluido en la página 7

@ FWD/DND Button and Indicator: @ INTERCOM Button and Sets or cancels the Call Indicator: Forwarding/Do Not Disturb Used for making or receiving feature. an intercom call. @TRANSFER Button: @CONFERENCE Button and Indicator: Transfers a call to any Used for speaking with three extension. parties at the same time. 0 PAUSE Button: Inserts a pause between the @ REDIAL Button: Redials the last number access number and the dialed. phone number. @ FLASH Button: @I AUTO DIAL/STORE Butt

Resumen del contenido incluido en la página 8

Using overlay When you set the system programming data, the function of the KX-T7030 connected to your EMSS unit will change as follows. SECRET 47- + CLEAR PAUSE STORE/AUTO SELECT -7-

Resumen del contenido incluido en la página 9

Installing the card holder Line up the marks (b) on 1 the card holder and ones on the slide rails of the unit. Push the two shaded 2 portions slightly and insert the edges of the holder under the slide rails and then slide down toward arrow “A”. Removing the card holder: Push the card holder toward arrow “B” while keeping the tip of the holder pulled toward arrow “C”. -8-

Resumen del contenido incluido en la página 10

Wall mounting This unit can be mounted on the wall phone plate. Turn the handset hook Place the stand on the center of the unit. upside down. 4 1 / Mount the unit on the wall Remove the attached stand. 5 phone plate. 2 To temporarily place the handset down during a conversation, hook as shown. shows UP for WALL. f -9-

Resumen del contenido incluido en la página 11

NOTE: If there is any trouble, disconnect the unit from the extension line and This equipment has been tested and connect a known working phone. If found to comply with the limits for a the known working phone operates Class B digital device, pursuant to properly, have the defective phone Part 15 of the FCC Rules. These repaired by one of the specified limits are designed to provide reasonable protection against harmful Panasonic Factory Service Centers. If the known working phone does

Resumen del contenido incluido en la página 12

Important information (cont.) aKeep the unit away from heating appliances and electrical noise generating devices such as fluorescent lamps and motors. l The unit should be kept free of dust, moisture and vibration, and should not be exposed to direct sunlight. ODO not use benzine, thinner, or the like, or any abrasive powder to clean the cabinet. Wipe it with a soft cloth. l Do not use any handsetdther than Panasonic handset. Accessory order infor&ti _ oReplacement parts and accessori