Manual de instrucciones de Xantech DCCBB

Resumen del contenido incluido en la página 1

INSTALLATION INSTRUCTIONS

DCSS/DCCBB
Doorbell Communicator

DESCRIPTION
The DCSS/DCCBB is a Doorbell Communicator that is used with the DCH4 to provide keyless entry
control with the MRC88CTL. The DCSS is a stainless steel version. The DCCBB is a cool bronzed
black version. Both DCSS and DCCBB mount into a single gang box.

SPECIFICATIONS
Power: Telephone line powered (18VDC 20mA minimum)
Dimensions:
o Faceplate: 123.8mm x 79.4mm x 4.6mm (4.875” x 3.125” x 0.18”)
o Phone:

Resumen del contenido incluido en la página 2

INSTRUCTIONS The DCSS/DCCBB is designed to be flush mounted into a standard single gang Rough-In box with a minimum inside dimension of 1.70” deep x 2.00” wide x 2.84” tall. A. New Construction Flush Mounting Step 1. Front of box should stick out approximately ½" from front surface of wall stud (this may vary depending on the walls sheathing and siding thickness). Caution: Rough-In box must be mounted LEVEL and must NOT stick out beyond the front surface of siding. Step 2. To

Resumen del contenido incluido en la página 3

PROGRAMMING A. Adjusting Speaker Volume The speaker volume pot can be adjusted to increase or decrease the speaker volume to the level desired. B. Adjusting the Microphone Volume In certain noisy locations (background traffic, machinery or wind), the microphone volume may need to be decreased. A symptom of this is one-way talk path, in which the distant party cannot be heard over the speaker. A microphone volume pot is provided for increasing or decreasing the microphone vol

Resumen del contenido incluido en la página 4

FCC REQUIREMENTS This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the side of this equipment is a label that contains, among other information, a product identifier in the format US:AAAEQ##TXXXX. If requested, this number must be provided to the telephone company. The REN is used to determine the number of devices that may be connected to a telephone line. Excessive REN's on a telephone line may result in the devices not ringing in respo