Manual de instrucciones de SECO-LARM USA SK-1123-FQ

Resumen del contenido incluido en la página 1

ENFORCER FLUSH-MOUNT OUTDOOR ACCESS KEYPAD
QUICK REFERENCE GUIDE

1. Using the User Codes:
Note: u u u u
A. User codes operate the door (4-8 digits long).
indicates user code.


Press u u u u
Note: x x x x
B. The # key must be pressed also if the keypad is in manual-entry mode.
indicates master code.

Press u u u u #

2. Using the Master Code:

The Master Code can be used to operate the door or program the keypad (4-8 digits long, see section 5 belo

Resumen del contenido incluido en la página 2

ENFORCER FLUSH-MOUNT OUTDOOR ACCESS KEYPAD ENFORCER FLUSH-MOUNT OUTDOOR ACCESS KEYPAD TABLE OF CONTENTS REPROGRAM THE KEYPAD (SELECT DATA) Introduction........................................................................................................................................... 2 To change certain data in the keypad (such as to delete or change user codes), do the following: Dimensions.........................................................................................

Resumen del contenido incluido en la página 3

ENFORCER FLUSH-MOUNT OUTDOOR ACCESS KEYPAD ENFORCER FLUSH-MOUNT OUTDOOR ACCESS KEYPAD UNIQUE FEATURES INSTALLER PROGRAMMING These functions should only be used by professional installers, as incorrect entries can disable the entire keypad function. 12~24V AC/DC universal power – No programming or jumpers needed. (DEFAULT: 0 0 0 0 ) 1. Enter Programming Mode Note: After entering Mantrap (Interlock) – When used in pairs and with optional magnetic contacts, keypads can Enter Master C

Resumen del contenido incluido en la página 4

ENFORCER FLUSH-MOUNT OUTDOOR ACCESS KEYPAD ENFORCER FLUSH-MOUNT OUTDOOR ACCESS KEYPAD PREPARING TO PROGRAM THE KEYPAD WIRING, BASIC DIAGRAM To program the SK-1123-FQ, first determine the following information: The ENFORCER SK-1123-FQ has backlit keys that can be programmed for different 1. The master code – Allows the system administrator to program or operate the keypad. applications. The keypad can be always illuminated (FULL), or illuminated only during user 2. The user code or code

Resumen del contenido incluido en la página 5

ENFORCER FLUSH-MOUNT OUTDOOR ACCESS KEYPAD ENFORCER FLUSH-MOUNT OUTDOOR ACCESS KEYPAD PROGRAMMING NOTES SPECIFICATIONS 1. Master Code: The SK-1123-FQ comes pre-programmed with the Master Code set at 0000. Power: Additional codes and/or data should be programmed at the owner’s discretion. However, to ensure Operating voltage – 12~24 Volts AC/DC. No jumper needed to set voltage. security, program a new Master Code to replace the factory-set Master Code as soon as possible. Stand-

Resumen del contenido incluido en la página 6

ENFORCER FLUSH-MOUNT OUTDOOR ACCESS KEYPAD ENFORCER FLUSH-MOUNT OUTDOOR ACCESS KEYPAD WIRING – Auxiliary Accessories OUTPUT 2 (NPN TRANSISTOR OPEN COLLECTOR) The Output 2 is an NPN transistor open collector output controlled by User Code 2, and can be 1. Tamper N.C. used for some auxiliary controls. It is equivalent to an N.O. output rated 100mA @24VDC. When the keypad is secured in the single-gang box, the tamper switch is in the 1. Shunting an N.C. Protection Zone closed pos

Resumen del contenido incluido en la página 7

ENFORCER FLUSH-MOUNT OUTDOOR ACCESS KEYPAD ENFORCER FLUSH-MOUNT OUTDOOR ACCESS KEYPAD WIRING 5. Door-Hold-Open Mode Example Wiring, 2 Keypads with Mantrap Interlock Diode For N.C. locking devices: Connect a relay For N.O. locking devices: Connect a relay to 1N4004 DOOR #1 Cathode output 2 in parallel with the locking device. Door #2 sensing to output 2 in series with the locking device. SM-200 Electric Lock #1 N.C. 12~24V AC/DC power supply Crosswire connection f

Resumen del contenido incluido en la página 8

Page 9 Page 8 SK-1123FQ – User Code Chart