Manual de instrucciones de Sonic Alert DS 800

Resumen del contenido incluido en la página 1

INSTALLATION DIRECTIONS DS 800/80

The DS 800/80 are both a doorbell and telephone signalers. The DS 800/80 are designed to work with most kinds of doorbell
systems and standard modular telephone jacks. They will work in homes with or without an existing doorbell or chime.

The DS 800 flashes a light that is plugged into its outlet and also sends signals to Sonic Alert remote receivers.

The DS 80 also flashes a light that is plugged into its outlet but does not send a signal to remo

Resumen del contenido incluido en la página 2

HOMES WITH INTERCOM SYSTEMS The DS 800 / 80 will work with most intercom systems. For this feature the optional DS 800T Sensor is required. PART 2 TELEPHONE AND FINAL INSTALLATION PROCEDURES After the wires have been connected to your signaler, the DS 800/80 is almost ready for use. 1. Plug the DS 800/80 into the 120-volt outlet and plug the telephone cord into a nearby modular telephone jack. Plug any incandescent lamp into the outlet on the side of the DS 800/80, (MAXIMUM 300 WA