Resumen del contenido incluido en la página 1
OPERATING GUIDE for your
GEM-DXK3 KEYPAD
© NAPCO 2006 OI327 11/06
1
Resumen del contenido incluido en la página 2
INTRODUCTION The GEM-DXK3 is a “smart”, interactive, You'll probably find subjects mentioned in optimum safety and security, familiarize menu-driven keypad designed for your this booklet that do not apply to your yourself with this equipment. Periodically Napco control panel. A digital display is system. Napco control panels have such check its condition and state of readiness provided to show the status of your a wide variety of features that few security by testing it at least once a wee
Resumen del contenido incluido en la página 3
TABLE OF CONTENTS TO SILENCE AN ALARM, ENTER YOUR TABLE OF CONTENTS Section Page CODE, AND PRESS J. FOR SERVICE, CALL: __________________ KEYPAD CONTROLS & INDICATORS ............................................... 4 CENTRAL STATION: __________________ ARMING AWAY: SETTING THE ALARM WHEN LEAVING ............... 6 EXIT DELAY: _________________________ ARMING STAY: PROTECTING YOURSELF AT HOM
Resumen del contenido incluido en la página 4
KEYPAD CONTROLS & INDICATORS 13 2 96 1 INTERIOR BYPASS FIRE/TBL SYS TBL CHIME 3 ARMED STATUS 7 R 1 2 3 P 8 4 U 9 B 4 5 6 Q 5 10 C 7 8 9 0 G 6 11 12 4
Resumen del contenido incluido en la página 5
KEYPAD CONTROLS & INDICATORS Unbypasses a bypassed zone. (GEM- Window. Lights indicate system AWAY Button. (1) Arms all zones in 10 1 status messages; digit display P3200/9600 panels only). the system. (2) Scrolls window indicates related zone, function or display backward (PRIOR). (3) 6 RESET Button. (1) Resets various error message numbers. Answers “NO” to questions in the system troubles, displays, etc. (See window display. STATUS Light. Lights (green) to text.) (2) Resets reside
Resumen del contenido incluido en la página 6
ARMING AWAY: SETTING THE ALARM WHEN LEAVING Arming the System 1. Check the keypad. The green STATUS light must be on in order to arm. 12 BYPASS FIRE/TBL SYS TBL CHIME INTERIOR If the green light is off, the number(s) of any unsecured zone(s) will display in the window. Refer to the pull-up zone list for the location of each problem zone and secure by closing windows, doors, etc.. When all zones are secure, the green STATUS light will come on. 2. Arm the system. Enter your U
Resumen del contenido incluido en la página 7
ARMING AWAY: SETTING THE ALARM WHEN LEAVING System Trouble If you attempt to arm with the SYS TBL light on, a 3-second tone will sound and a “P” will display in the window. This indicates that the system has detected P a problem which may prevent it from operating properly. A number corresponding to the INTERIOR BYPASS FIRE/TBL SYS TBL CHIME trouble will then appear in the display. Refer to SYSTEM TROUBLE ERROR CODES for descriptions of these troubles. If you cannot correct the
Resumen del contenido incluido en la página 8
ARMING STAY: PROTECTING YOURSELF AT HOME Arming in STAY Mode Interior Zones, when bypassed, allow free movement within the home while the BYPASS FIRE/TBL SYS TBL CHIME INTERIOR protection of armed perimeter zones is maintained. To bypass Interior Zones, enter your User Code followed by P. The red ARMED light will light and the green STATUS light will blink, indicating zones bypassed. The INTERIOR and BYPASS lights will display in the window. Instant Protection When reti
Resumen del contenido incluido en la página 9
ARMING STAY: PROTECTING YOURSELF AT HOME Easy Exit (Optional - Easy Exit programmed? YES NO) Your system may have been programmed for Easy Exit, which allows a user to exit the premises while the system is armed STAY. By activating Easy Exit while the system is armed STAY, the Exit Delay countdown will take place, during which time you are permitted to leave through the exit door. The Easy Exit Delay time will be identical to the Exit Delay time the system gives you each tim
Resumen del contenido incluido en la página 10
TURNING OFF THE ALARM (DISARMING) WHEN RETURNING Disarming the System 1. Enter your premises through the Entry/Exit door. The keypad will sound a steady tone to remind you to disarm the system before your Entry Delay time expires. 2. Enter your User Code and press U. The red ARMED light will go out, indicating that the system has been disarmed. • If you enter an invalid code, the keypad will beep 4 times, signifying an error. Re-enter your code immediately. 10 seconds before Entry
Resumen del contenido incluido en la página 11
FIRE PROTECTION (Applicable only where local ordinance permits use of this alarm control panel for fire protection). Fire-Zone Alarm If a fire is detected, the FIRE/TBL light will display with the zone number and the NN BYPASS FIRE/TBL SYS TBL CHIME INTERIOR keypad sounder will pulse. • If a fire is in progress, evacuate the premises immediately! If necessary, call the Fire Department from an outside phone. • If there is no evidence of a fire, enter your code and press U to silenc
Resumen del contenido incluido en la página 12
FIRE PROTECTION 2. One person sounds the alarm. alternate route through the window. Preparing a Fire Escape Plan If the door is cool, brace your 3. Each person tests his door. Even with the most advanced fire shoulder against it and open it alarm system, adequate protection 4. Pretend the door is hot and use the cautiously. Be ready to slam the requires an escape plan. alternate escape exit. door if smoke or heat rushes in. To prepare your plan, draw floor 5. Everyone meets outdoor
Resumen del contenido incluido en la página 13
FIRE PROTECTION Floorplan Draw a plan of your premises in the space provided below. Floorplan 13
Resumen del contenido incluido en la página 14
FIRE PROTECTION LIMITATIONS OF FIRE ALARM WARNING SYSTEM provide early-enough warning for a variety of alarm is obscured by noise from a stereo, radio, Although a fire alarm system may be of a reasons: (a) they may not sense fires that start air conditioner, or other appliance, or by reliable and state-of- the-art design, neither it where smoke cannot reach them, such as in passing traffic, etc. Alarm warning devices, nor its peripheral detection devices can offer chimneys, walls, roofs,
Resumen del contenido incluido en la página 15
FUNCTION MENU The keypad can provide access to a wide assortment of utility functions. The functions are displayed in a prompting “YES/NO” format. 1. To enter the Function Menu, press R. • In all UL-listed or high-security installations, a valid User Code must first be entered followed by R. 2. To skip a function, answer NO (Q) or R. 3. To select and execute a function, answer YES (P) or U. • Functions may be manually scrolled forward or backward using R and B, respectively. • To r
Resumen del contenido incluido en la página 16
FUNCTION MENU 4. Display System Troubles? Displays a 1- or 2-digit error code representing a problem detected in the system. (See SYSTEM TROUBLE ERROR CODES for a 04 INTERIOR BYPASS FIRE/TBL SYS TBL CHIME description of these codes). Use NEXT(P) and PRIOR (Q) to scroll system troubles. (For GEM-P9600/3200 panels only). 5. Display Fire Alarms? Displays alarms that have occurred on the Fire Zone(s). Press the NEXT(P) and PRIOR (Q) buttons to scroll zones. 05 INTERIOR BYP
Resumen del contenido incluido en la página 17
FUNCTION MENU 9. Reset System Trouble? System troubles display and sound at the keypad. Correcting the trouble will clear most 09 BYPASS FIRE/TBL SYS TBL CHIME INTERIOR indications, however the following error codes will require manual reset: E11; E13; E19; E20 and E22. (See SYSTEM TROUBLE ERROR CODES for a description of error codes.) 10. Reset Sensor Watch Failure (Sensor Watch programmed? YES NO). Your system may have been programmed for Sensor Watch, a feature whic
Resumen del contenido incluido en la página 18
FUNCTION MENU 15. Activate Telephone Test? (Telephone Test programmed? YES NO). Sends a communicator test to the central station. A communication failure will be indicated 15 INTERIOR BYPASS FIRE/TBL SYS TBL CHIME at the keypad by a system trouble “E03-00” display. Repeat the test to attempt to correct a communication failure, as any successful communication will clear this display. 16. Delay Arming 1-4 hours. (Not for UL-listed systems). Your system may be set to arm auto
Resumen del contenido incluido en la página 19
FUNCTION MENU 17. Activate Program? Activates the Program Mode from Keypad No. 1. Note: This feature is disabled while armed. (See PROGRAMMING USER CODES) 17 INTERIOR BYPASS FIRE/TBL SYS TBL CHIME 18. Activate Download? For installer's use only. If accidentally enabled, press C to exit. 18 INTERIOR BYPASS FIRE/TBL SYS TBL CHIME Note: This feature is disabled while armed. 19. Relay Control? (Relay Control prog
Resumen del contenido incluido en la página 20
CENTRAL STATION MONITORING Your alarm specialist may have restored first, then the panel armed and identified. If your system reports on arming programmed your system to be monitored disarmed, all within the delay period. (Closing Report), the central station will by a central station. The built-in digital acknowledge arming. This will signal at the Opening and/or Closing Reporting. communicator can transmit emergency keypad as a “ringback” beep. Note: If the Your system can notify
