Manual de instrucciones de Gianni Industries GEM DG-100

Resumen del contenido incluido en la página 1

DG-100 Split Digital Keypad Entry system
Operation User's Manual (4 Codes)



1. Product Characteristic:
Allows up to 99 PIN codes
Random user codes for anti-peeping
Fully Programmable via keypad and master code
LED display with audible indication
Non-Volatile Memory
Invalid PIN Lock-out
Metal die casting housing
Deftly dimension for narrow jamb
With vandal resistant screws
Split of controller and reader for high security.


2. Specifications:
Operating Volta

Resumen del contenido incluido en la página 2

4. Default Setting: Master code 1234 Relay time 5 Pressed key delay 30 seconds Setting mode delay time 50 seconds 5. Operation Instruction: Enter Program Mode: 1. Compose twice the master code (Factory master is 「1234 」) → 2 beeps → you are now in the "programming mode". 2. After 50 seconds if you have not entered any codes or data, the system will automatically exit from the programming mode. 3. After 30 wrong codes attempts at the master code the lockout facility will op

Resumen del contenido incluido en la página 3

Master Code reset to Factory 「1234 」 and Delete All User Codes Insert the jumper RESET 1-2 position 5 audible beeps Reset Master Code successful (after 3 seconds) 5 audible beeps Delete All User Codes Return Insert the jumper to 2-3 positions. 6. Wiring diagram: Vin Vout Blue + PB Power Supply Red － + N.O. Black － White COM RC Fail-Safe Green N.C. R Locking Device P Reset t Master Code o P 1 Factory, or remove all 2 stored PIN codes. Push Button 3 Reset Vout Vin Blue +