Resumen del contenido incluido en la página 1
DIGIPAK PRO.V4
USER MANUAL
Resumen del contenido incluido en la página 2
IMPORTANT SAFETY PRECAUTIONS 1. Read Instructions – All the safety and operating instructions should be 14. Servicing – The user should not attempt any service to the appliance read before this product is operated. beyond that described in the operating instructions. All other servicing 2. Retain Instructions – The safety and operating instructions should be should be referred to qualified service personnel. retained for future reference. 15. Ventilation – Slots and openings in the cabinet a
Resumen del contenido incluido en la página 3
INFORMATION Thank you for purchasing Stanton’s newest innovation in professional tabletop CD players. The C.324 offers up hot new features and sleek design with unmatched reliability, engineered to bring ultimate performance and control to even the most discerning artist. Designed for DJs who want to play and scratch CDs just like vinyl, our flagship tabletop CD player features a large touch-sensitive jog wheel, making it possible to mix, scratch, and beat juggle just like using a tur
Resumen del contenido incluido en la página 4
CONTROL OVERVIEW M.212 1 15 2 14 13 3 12 4 5 11 6 10 7 8 9 1. Channel Gain - Adjusts the pre-fader volume for cleaner sound. 8. Mic Input - Insert your ¼” microphone plug here. Reduce the channel gain if you notice the level indicators flashing 9. Headphone Input - Insert your ¼” headphone plugs here. red. 10. Fader Start On/Off Switch - When the unit has been connected to a 2. Mic
Resumen del contenido incluido en la página 5
CONTROL OVERVIEW M.212 18. Fader Start Control Jacks - Connect these jacks to the Fader input jacks of the CD player using the 3.5mm stereo mini cord. 19. Master Output - Unbalanced RCA connectors controlled by the Master level. 20. Line Inputs - Unbalanced RCA jacks for connecting stereo audio from line level sources such as CD players, HiFi VCRs, cassette decks, DAT machines, laser discs, tuners, even synthesizers or other mixing consoles. DC 6V Note: Plug
Resumen del contenido incluido en la página 6
SPECIFICATION M.212 INPUT / OUTPUT IMPEDANCE & SENSITIVITY: (MASTER 0 DBV OUTPUT LINE 10K OHM /-14dBV (200mV) +/-2dB PHONO 47K OHM /-50dBV (3.16mV) +/-2dB MIC 2.2K OHM /-60dBV (1mV) +/-2dB MASTER 1K OHM PHONES 33 OHM / 0dBV (1V) ±2dB MAX. OUTPUT (THD=1% , Maximum gain, EQ flat) MASTER MORE THAN +18dBV (8.0V) at load=100K OHM PHONES MORE THAN +4dBV (1.6V) at load=32 OHM CHANNEL BALANCE WITHIN 3dB FREQUENCY RESPONSE: (MASTER OUTPUT, EQ FLAT) LINE
Resumen del contenido incluido en la página 7
CONTROL OVERVIEW C.324 2 4 7 11 1 3 3 5 6 8 9 10 12 13 14 35 15 16 34 17 33 18 19 20 32 31 21 30 22 29 23 28 27 26 25 24 1. TIME – Switches the time value displayed on the LCD between 7. FX TIME ENCODER – This multi-function encoder controls various elapsed track time, remaining track time, and the total remaining time parameters of the unit, depending on the selected mode: FX Ti
Resumen del contenido incluido en la página 8
CONTROL OVERVIEW C.324 14. FX SELECT – These six buttons refer to each of the individual DSP after the disc has been ejected. The sampler pitch can be adjusted by effects. Press once to engage (illuminated) and press again to disengage. turning the TIME KNOB, or by pressing the button down and rotating Use the TIME KNOB, RATIO KNOB, MINUS BUTTON, and PLUS the JOG WHEEL simultaneously. The sampler volume can be adjusted BUTTON to fine tune the parameters used for
Resumen del contenido incluido en la página 9
CONTROL OVERVIEW C.324 36. AUDIO OUT – This analog output signal requires a pair of RCA cables (left and right) to be connected to a line level input. 37. DIGITAL OUT – This digital output signal requires one S/PDIF (75Ohm, coaxial) cable to be connected to a S/PDIF input on your mixer or computer. 38. FADER START/ RELAY – This connection allows two CD players to be linked for relay play. This can also be connected to a mixing board that supports automat
Resumen del contenido incluido en la página 10
45 SETUP C.324 CHECKING THE CONTENTS CONNECTIONS Check that the carton contains all of the following items. Make sure that the unit and any other equipment in the signal chain are turned off prior to making any connections. Tabletop CD player unit Printed user’s manual Connect the RCA cable to the rear of the unit and to the input on your mixer. One RCA cable Connect the power cable to the rear of the unit and to a proper AC outlet. One power cable One fader start /
Resumen del contenido incluido en la página 11
OPERATING INSTRUCTIONS C.324 STARTING PLAYBACK Once the PITCH BEND + button is released the pitch will return to the Press the PLAY/PAUSE button during the pause or cue mode to start pitch set by the PITCH SLIDER. playback. The PLAY/PAUSE button illuminates with a solid green light The jog wheel can also be used to temporarily bend the pitch of the music during playback. during normal playback. Rotate the wheel clockwise to speed up and counterclockwise to slow down. The speed that
Resumen del contenido incluido en la página 12
OPERATING INSTRUCTIONS C.324 LOOPS Clearing the Pads Press the CLEAR button (#27). While it is flashing, press the pad(s) you Creating Loops wish to clear and those will also flash red. Press CLEAR once more to Engage playback by pressing the PLAY/PAUSE button, causing it to complete the process, and the pad lights will now turn off, letting you illuminate solid green (not flashing). know that there is no information stored in them. Set the start point of the seamless loop by pr
Resumen del contenido incluido en la página 13
OPERATING INSTRUCTIONS C.324 To record a BPM synchronized real-time sequence: SAMPLE mode LED on Program several sample cues by pressing the pads. CUE point Mode: (Sampler Off) Ensure that the SAMPLER button is not lit. Program several cues and ensure that the SAMPLER button is off; Hit the RECORD button. The real-time sequence recording is now press the button and it blinks red. LCD indicates BANK P01 and armed and the RECORD button blinks. If a previous sequence had press
Resumen del contenido incluido en la página 14
OPERATING INSTRUCTIONS C.324 JOG WHEEL SENSITIVITY FADER START The touch sensitivity of the jog wheel can be adjusted to fit the needs and By connecting the CD player to a mixing board that has the fader start feel of different users. When adjusting the sensitivity, be conscious of feature, the crossfader will engage playback or cue mode depending on its extreme settings which may affect your performance. Setting the location. If the CD player is connected to the left side of the cr
Resumen del contenido incluido en la página 15
SPECIFICATIONS C.324 APPLICATION Model C.324 POWER SUPPLY AC 100V, 50/60Hz (For Japan) AC 110V, 60Hz (For Taiwan) AC 120V, 60Hz (For U.S.A., Canada, Mexico) AC 220V, 50Hz (For United Arab Emirates, Chile, Argentina) AC 220V, 60Hz (For Philippines) AC 230V, 50Hz (For Europe, New Zealand, South Africa, Singapore, Israel) AC 240V, 50Hz (For Australia, U.K.) POWER CONSUMPTION: 17W DIMENSIONS 318 (W) x 358 (D) x 109.5 (H) mm WEIGHT 4.48Kgs AUDIO CHARACTERISTICS ITEM
Resumen del contenido incluido en la página 16
WARRANTY & RETURN POLICY Warranty Through Stanton’s authorized dealers around the World, Stanton, or one of Stanton’s authorized distributors outside the U.S., will, without charge, repair or replace, at the sole discretion of the entity responsible for making the repair or providing the replacement, any Stanton merchandise proved defective in material or workmanship for a period of one year following the date of original purchase. Exceptions to this warranty are as noted below: The warranty
