Resumen del contenido incluido en la página 1
TM
ViewSonic
- 使用手冊
Digital Photo Frame
VFM835-52G
- User Guide
VFM835-72G
Model No.: VS12674
Resumen del contenido incluido en la página 2
Important Safety Instructions . Do not use the equipment near water. 2. Wipe the machine with a soft and dry cloth. 3. Do not block any vent holes. Please install the product in accordance with the manufacturer’s instructions. 4. Do not use the product on your legs for a long time because it gets hot and you may be burned. 5. Please avoid installing the product in a place where the temperature is above 35°C or lower t
Resumen del contenido incluido en la página 3
Declaration of RoHS Compliance This product has been designed and manufactured in compliance with Directive 2002/95/EC of the European Parliament and the Council on restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS Directive) and is deemed to comply with the maximum concentration values issued by the European Technical Adaptation Committee (TAC) as shown below: Substance Proposed Maximum Con
Resumen del contenido incluido en la página 4
Copyright Information © Copyright ViewSonic Corporation, 2009. All rights reserved. ViewSonic, the three birds logo, OnView, ViewMatch, and ViewMeter are registered trademarks of ViewSonic Corporation. Disclaimer:ViewSonic Corporation shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from furnishing this material, or the performance or use of this product
Resumen del contenido incluido en la página 5
TABLE OF CONTENTS Introduction.............................................................................................................................................................................................1 Main Features .........................................................................................................................................................................................2 Controls and Connections ................................................
Resumen del contenido incluido en la página 6
Introduction Thank you for purchasing this Digital Photo Frame. This Digital Photo Frame is compatible with SD, MMC and MS memory card formats, which enables you to view digital photo directly from your camera’s memory card. This manual contains important safety information and operation instructions, so please read all the instructions carefully before using the Digital Photo Frame and keeps it for future reference. We have done our best to produce a complete and accurate man
Resumen del contenido incluido en la página 7
Main Features 8 inch Digital TFT LCD: 800*600 4:3 Swift touch keys with blue backlight Decorative appearance, good quality Displays digital photos (JPEG) without a computer Slide show with background music and multiple transition effects Playback of MP3 music files Supports MPEG-1, MPEG-4 and M-JPEG video formats Clock and Calendar display Alarm setting Auto power On/Off Compatible with SD/MMC/MS memory cards USB Host for connecting to the USB mass storage Controlled
Resumen del contenido incluido en la página 8
Controls and Connections 1. SD/MMC/MS-card slot 7. [M] Menu touch key; open OSD menu 2. USB HOST 8. [ ] Exit touch key 3. 5V 2A DC Input socket 9. [ ] Left touch key 4. Adjustable mounting 10. [ ] Right touch key 5. Infrared sensor 11. [ ] Up touch key 6. [ ] Play/Pause/Confirm button 12. [ ] Down touch key ViewSonic VFM835-52G/VFM835-72G 3
Resumen del contenido incluido en la página 9
Remote Control 1 Turn on/off the unit. 2 Move the cursor up. 3 Move the cursor left; Select previous photo while viewing photos. 4 Return to main menu. MENU 5 Move the cursor down. 6 Select previous photo while viewing photos or switch to previous page in thumbnail mode. Fast rewind within a track/video in music/video mode. 7 Zoom in a photo or a video scene. 8 To set photo to display on full screen or fit to screen if its resolution is higher 4:3/16:9 than resoluti
Resumen del contenido incluido en la página 10
Battery installation for the Remote Control Remove the insulating mylar strip from the battery if the battery is being used for the first time, it is located at the bottom back side of the remote control. If the remote control unit fails to work even when it is operated near the unit, replace the battery. 1. Press and hold the battery release tab in the direction of arrow . 2. Pull out the battery holder completely in the direction of arrow as shown in the left. 3. Remove the old b
Resumen del contenido incluido en la página 11
Getting Started Attaching the mount 1. Place the frame on a flat surface with its back facing you. 2. Place the mount carefully in the slot on the back of the frame. 3. Turn the mount counter-clockwise by 45° until it locks. It will now be possible to set the device in the landscape orientation. 4. Turn the mount counter-clockwise by 90° until it locks. It will now be possible to set the device in the portrait orientation. 5. After the mount has been attached, you can adjust the he
Resumen del contenido incluido en la página 12
Connecting to the power 1. Plug one end of the power adaptor into the DC socket in the 2. Switch the power to the ON marking position to turn on the Digital Digital Photo Frame, and the other into a wall outlet. Photo Frame. Note: To turn off the Digital Photo Frame completely, slide the power switch from ON to OFF. Inserting Media In order to play photos from a card or a memory stick, insert the card into its respective card slot on the Digital Photo Frame or use the USB port. T
Resumen del contenido incluido en la página 13
1. Insert the SD/MMC/MS card into the 3-in-1 card slot with the metallic 2. Push a USB memory stick into the USB HOST slot. contacts facing towards the display. Note: Do not use any force while inserting a memory card or attaching a memory stick. The 3-in-1 card slot only reads one memory card at a time. Do not insert more than one card into one memory card slot. To remove the cards or the USB memory stick, pull it out gently. Copy files from computer You can connect the
Resumen del contenido incluido en la página 14
4. Drag and drop the files on your computer to the memory device connected to the digital photo frame or to the built-in memory. 5. To disconnect the USB cable from the computer, double click the Safely Remove Hardware icon on the task bar. Click the USB Mass Storage Device, and then click OK. Note: Make sure no USB storage device is connected with the Digital Photo Frame before connecting to your computer. The Digital Photo Frame must be plugged in and turned on before connecting to t
Resumen del contenido incluido en la página 15
Viewing Photos Main menu When a memory device is inserted into the Digital Photo Frame, the corresponding icon appears on the main menu. On the main menu, you can select connected source to view photos, display clock, display calendar or change frame settings. 1. Touch [M] to access the main menu. All connected source, clock, calendar and setup icons are displayed. Memory Appears when you purchase a Frame with NAND flash memory. (only for model with internal memory) SD/MMC/MS App
Resumen del contenido incluido en la página 16
Photo Start a slideshow or viewing photos of the memory source manually. Music Start playing MP3 music. Video Start playing videos. Files Browse all files of the memory source; and copy or delete files. Viewing thumbnails In Photo mode, the photos on the selected memory source can be displayed on the screen as thumbnails. Up to 15 photos are displayed at a time. 1. Select a memory source (e.g. USB, SD/MMC/MS) on the main menu and touch [ ]. The mode menu appears. 2. Touch
Resumen del contenido incluido en la página 17
Browsing a single photo You can select a single photo to display on the screen: 1. Select a photo in the thumbnail view, and touch [ ]. The selected photo is displayed on the screen, and there will pop up a hint for button operation. (Note: Do not set hint time to “0” in setup menu, if you want the Digital Photo Frame to display a hint for button operation.) 2. Select previous/next photo, touch [ ] or [ ]. 3. Return to the thumbnail view, touch [ ]. 4. Start a slide show from the c
Resumen del contenido incluido en la página 18
Using OSD menu You also can use the OSD menu to view photos manually one by one. 1. Touch [M] or press [OSD] button on the remote control during viewing a photo or slideshow. The OSD menu appears on the screen and the slideshow pauses. 2. Touch [ ] or [ ] to navigate between icons on the OSD menu. Start or resume slideshow from the current photo, highlight and touch [ ], and then the icon is changed to icon. Select previous/next photo, highlight or , and then touch [ ]. St
Resumen del contenido incluido en la página 19
Listening to Music If there are MP3 files on the memory device, you can play them on the Digital Photo Frame. 1. Select a memory source (e.g. USB, SD/MMC) on the main screen and touch [ ]. The mode menu appears. 2. Touch [ ] or [ ] to select Music, and then touch [ ]. The file list interface appears on the screen. 3. Touch [ ] or [ ] to select a song, and then touch [ ].The music playback interface appears on the screen. 4. Touch [ ] or [ ] to navigate between icons on the O
Resumen del contenido incluido en la página 20
Watching Videos You can watch videos on the Digital Photo Frame. It supports MPEG-1, MPEG-4 and M-JPEG video formats used by most digital cameras. 1. Select a memory source (e.g. USB, SD/MMC) on the main screen and touch [ ]. The mode menu appears. 2. Touch [ ] or [ ] to select Video, and then touch [ ].The video file list appears on the screen. 3. Use [ ] or [ ] to select a video, and then touch [ ] to start playing it. 4. While video playing, touch [M] or press [OSD] button o
