Manual de instrucciones de American DJ DJ Scan/RG

Resumen del contenido incluido en la página 1

DJ Scan/RG™ Introduction
Introduction: Congratulations and thank you for purchasing the DJ
Scan/RG™ by American DJ®, one of the finest pieces of its kind on the
market today! The DJ Scan/RG™ is a great inexpensive, light weight,
intelligent fixture. Due to it’s physical specifications, it’s a great piece
for mobile DJ’s, roller rinks, small clubs, bars, and bowling centers.
When used in multiples of two or more, these units create an effect that
rivals that of units that can cost up

Resumen del contenido incluido en la página 2

DJ Scan/RG™ Safety Precautions DJ Scan/RG™ Quick Start  Do not spill water or other liquids into or on to your unit. Master/Slave Quick Start Stand Alone Mode  Be sure that the local power outlet match that of the required voltage Connect up to four units together via XLR cables. The master unit for your unit. will run the slaves to the masters built in programs and internal  Do not attempt to operate this unit if the power cord has been frayed microphone. Plug in

Resumen del contenido incluido en la página 3

DJ Scan/RG™ Set Up DJ Scan/RG™ Set Up Unpacking: XLR Male Socket XLR Female Socket XLR Pin Confi guration Every DJ Scan/RG™ has been thoroughly tested and has been shipped 1 Ground 2 Cold 2 Cold 1 Ground Pin 1 = Ground in perfect operating condition, there is no assembly necessary. Carefully Pin 2 = Data Compliment (negative) check the shipping carton for damage that may have occurred during 3 Hot 3 Hot Pin 3 = Data True (positive) shipping. If the carton appears to be damaged, c

Resumen del contenido incluido en la página 4

DJ Scan/RG™ Operating Instructions DJ Scan/RG™ Operating Instructions 12). Operating Modes: ™ 7. Please follow chart on page 12 for all slave dipswitch settings. Note You can use the DJ Scan/RG in three ways: only one fixture may use the master units dip switch settings (see • Stand alone mode - The unit will react to sound, chasing through the several built in programs. You can also use the optional DJ Page 12). Scan MINI/C Remote Control to blackout the units

Resumen del contenido incluido en la página 5

DJ Scan/RG™ Optional Remote DJ Scan/RG™ Cleaning The MINI/C controller may be purchased separately allowing you to Due to fog residue, smoke, and dust, cleaning the internal and external control the main unit, and any others connected to it, while it is in stand optical lenses must be carried out periodically to optimize light output. alone mode. You can set the unit to blackout. If you have more than 1. Use normal glass cleaner and a soft cloth to wipe down the outside o

Resumen del contenido incluido en la página 6

DJ Scan/RG™ Trouble Shooting DJ Scan/RG™ Trouble Shooting Cont. Unit blacks out in stand alone mode; Listed below are a few common problems the user may encounter, 1. Some of the units’ built-in patterns include special effects such with solutions. as blackout sweeps. No light from the unit; 2. Be sure the audio sensitivity knob is turn in the full clockwise 1. Check if the ‘Power On’ (red) LED is lit and the fan is running. If position (maximum sensitivity). n

Resumen del contenido incluido en la página 7

DJ Scan/RG™ Focusing DJ Scan/RG™ DMX Settings 1. To focus a DJ Scan/RG,™ it is best to first turn down the music ON ON ON ON sensitivity knob to its minimum position. 1 2 3 4 5 6 7 8 9 1 2 3 4 5 6 7 8 9 1 2 3 4 5 6 7 8 9 1 2 3 4 5 6 7 8 9 2. Loosen the thumb screw on the front of the unit that hold the lens Head 1 Head 5 Head 9 Head 13 in place. ON ON ON ON 3. Adjust the focus by manually moving the lens up and down. 4. Tighten the thumb screw after you achi

Resumen del contenido incluido en la página 8

Specifications: DJ Scan/RG™ DJ Scan/RG™ Warranty Weight: 13 Lbs. 1-YEAR LIMITED WARRANTY Dimensions: 18” x 8.6” x 4.3” A. American DJ® hereby warrants, to the original purchaser, American DJ® products to be Lamp: JCR/H5 15v-150w free of manufacturing defects in material and workmanship for a period of 1 Year (365 days) from the date of purchase. This warranty shall be valid only if the product is purchased Fuse: 120v = 5A GMA within the United States of America, incl