Manual de instrucciones de American DJ DJ Roller

Resumen del contenido incluido en la página 1

DJ Roller™ Unpacking
Thank you for purchasing the DJ Roller™ by American DJ®. Every DJ
American DJ®
Roller™ has been thoroughly tested and has been shipped in perfect
operating condition. Carefully check the shipping carton for damage
that may have occurred during shipping. If the carton appears to be
damaged, carefully inspect your unit for any damage and be sure all
equipment necessary to operate the system has arrived intact. In the
event damage has been found or parts are miss

Resumen del contenido incluido en la página 2

DJ Roller™ Safety Precautions DJ Roller™ Quick Start Master/Slave Quick Start Stand Alone Mode • Do not spill water or other liquids into or on to your unit. • Be sure that the local power outlet match that of the required voltage Connect up to four units together via XLR cables. The master unit for your unit. will run the slaves to the masters built in programs and internal microphone. Plug in all units. When the DJ Roller™ is first turned on, • Do not attempt to op

Resumen del contenido incluido en la página 3

DJ Roller™ Set Up DJ Roller™ Set Up Special Note: Line Termination. When longer runs of cable are Power Supply: Before plugging your unit in be sure the source volt- used, you may need to use a terminator on the last unit to avoid erratic age in your area matches the required voltage for your American DJ® ™ DJ Roller.™ The American DJ® DJ Roller is available in a 120v and behavior. A terminator is a 90-120 ohm 1/4 watt resistor which is con- 220v version. Because line voltage m

Resumen del contenido incluido en la página 4

DJ Roller™ Operating Instructions DJ Roller™ Operating Instructions Operating Modes: Page 13 “Master Slave Dip Switch Settings”). ™ 7. Please follow the chart on page 13 for all slave dipswitch settings. You may use the DJ Roller in three different modes: Note only one fixture may use the master units dip switch settings • Stand alone mode - The unit will react to sound, chasing through the several built in programs. You can also use the optional MINI/C (see Page 1

Resumen del contenido incluido en la página 5

DJ Roller™ Optional Remote DJ Roller™ Cleaning The MINI/C controller may be purchased separately allowing you to Due to fog residue, smoke, and dust, cleaning the internal and external control the main unit, and any others connected to it, while it is in optical lenses must be carried out periodically to optimize light output. stand alone mode. You can set the unit to blackout. If you have more 1. Use normal glass cleaner and a soft cloth to wipe down the outside than one

Resumen del contenido incluido en la página 6

DJ Roller™ Trouble Shooting DJ Roller™ Trouble Shooting Cont. Listed below are a few common problems the user may encounter, Unit blacks out in stand alone mode; with solutions. 1. Some of the units’ built-in patterns include special effects such No light from the unit; as blackout sweeps. 1. Check if the ‘Power On’ (red) LED is lit and the fan is running. If 2. Be sure the audio sensitivity knob is turn in the full clockwise not, there is no main power supply. po

Resumen del contenido incluido en la página 7

DJ Roller™ Master/Slave Settings DJ Roller™ DMX Traits The chart below details the Master/Slave dip switch setting for all 16 units. For best operation never use more than 16 units in a Master/ DMX CHANNEL Slave confi guration. ON ON ON ON 4 3 12 COLOR GOBO 1 2 3 4 5 6 7 8 9 ROTATION TILT 1 2 3 4 5 6 7 8 9 1 2 3 4 5 6 7 8 9 1 2 3 4 5 6 7 8 9 Master - Head 1 Slave 5 Slave 9 Slave 13 PURPLE 232-255 SHUTTER 242-255 ON ON ON ON GOBO 11 220-241 PINK 203-231 3 3 1 2 3 4 5 6 7 8 9 1 2

Resumen del contenido incluido en la página 8

DJ Roller™ Warranty DJ Roller™ Specifications 1-YEAR LIMITED WARRANTY Model: DJ Roller™ A. American DJ® hereby warrants, to the original purchaser, American DJ® products to be Weight: 21 Lbs. free of manufacturing defects in material and workmanship for a period of 1 Year (365 days) from the date of purchase. This warranty shall be valid only if the product is purchased Dimensions: 18” x 8.6” x 4.3” within the United States of America, including possessions