Manual de instrucciones de American DJ 250HP

Resumen del contenido incluido en la página 1

DJ Scan 250HP™ Introduction
Introduction: Congratulations and thank you for purchasing the DJ
Scan 250HP™ by American DJ®, one of the finest pieces of its kind
on the market today! The DJ Scan 250HP™ is a great inexpensive,
light weight, intelligent fixture. Due to it’s physical specifications, it’s a
great piece for mobile DJ’s, roller rinks, small clubs, bars, and bowling
centers. When used in multiples of two or more, these units create an
effect that rivals that of

Resumen del contenido incluido en la página 2

DJ Scan 250HP™ Safety Precautions DJ Scan 250HP™ Quick Start • Do not spill water or other liquids into or on to your unit. Master/Slave Quick Start Stand Alone Mode • Be sure that the local power outlet match that of the required volt Connect up to four units together via XLR cables. The master unit will age for your unit. run the slaves to the masters built in programs and internal micro- • Do not attempt to operate this unit if the power cor d has been ph

Resumen del contenido incluido en la página 3

DJ Scan 250HP™ Set Up DJ Scan 250HP™ Set Up Unpacking: XLR Male Socket XLR Female Socket XLR Pin Configuration 1 Ground Every DJ Scan 250HP™ has been thoroughly tested and has been 2 Cold 2 Cold 1 Ground Pin 1 = Ground shipped in perfect operating condition, there is no assembly neces- Pin 2 = Data Compliment (negative) sary. Carefully check the shipping carton for damage that may have REMOTE REMOTE REMOTE INPUT OUTPUT INPUT OUTPUT INPUT OUTPUT 3 Hot 3 Hot

Resumen del contenido incluido en la página 4

DJ Scan 250HP™ Operating Instructions DJ Scan 250HP™ Operating Instructions 4. Turn the master unit dipswitchws to the “Off” position. Operating Modes: ™ 5. Please follow chart on page 13 for all master/slave dipswitch You can use the DJ Scan 250HP in three ways: settings. Note only one fixture may use the master units dipswitch • Stand alone mode - The unit will react to sound, chasing through settings. the several built in programs. You can also use the opti

Resumen del contenido incluido en la página 5

DJ Scan 250HP™ Operating Instructions DJ Scan 250HP™ Lamp Replacement connections to any standard DMX controller. Set dipswitch #1 to Lamp Replacement: Caution! Never open the unit when in use. the on position - Follow the set-up specifications that come with Always disconnect the main power before attempting to replace the the controller. lamp. 1. Be sure to follow the proper procedures when handling halogen DJ Scan 250HP™ Optiona

Resumen del contenido incluido en la página 6

DJ Scan 250HP™ Cleaning DJ Scan 250HP™ Trouble Shooting Cont. Due to fog residue, smoke, and dust, cleaning the internal and exter- may be used. For longer runs, this may cause data transmission nal optical lenses must be carried out periodically to optimize light problems (which will show up as random or incorrect movements) output. for best result, use proper balanced data transmission cable. 1. Use normal glass cleaner and a soft cloth

Resumen del contenido incluido en la página 7

DJ Scan 250HP™ Master/Slave Settings DJ Scan 250HP™ DMX Traits Channel Value Function The following details the proper dipswitch settings for the narrow and wide Master-Slave sound active programs. Please follow these setting 1 0 - 255 PAN when running four units in a Master-Slave configuration. 2 0 - 255

Resumen del contenido incluido en la página 8

Specifications: DJ Scan 250HP™ DJ Scan 250HP™ Warranty Weight: 11 Lbs./5 Kgs. 1-YEAR LIMITED WARRANTY Dimensions: 21” (L) x 9” (W) x 9.5” (H) A. American DJ® hereby warrants, to the original purchaser, American DJ® products to be Lamp: ZB-ELC10 24v-250w free of manufacturing defects in material and workmanship for a period of 1 Year (365 days) from the date of purchase. This warranty shall be valid only if the product is purchased Breaker: 5 Amp within th