Resumen del contenido incluido en la página 1
L5CL2_XE_US(INSTRUCTION).book 0 ページ ２００８年８月２５日 月曜日 午後３時４３分
INSTRUCTION MANUAL
Megapixel Camera
THIS INSTALLATION SHOULD BE MADE BY A QUALIFIED VCC-HD4000P
SERVICE PERSON AND SHOULD CONFORM TO ALL LOCAL
VCC-HD4000
CODES.
VCC-HDN4000PC
Please read this instruction manual carefully in order to ensure correct installation. In addition,
be sure to read carefully the electronic manual contained in the supplied CD-ROM to ensure
correct operation of the camera.
Contents
Information To User . . . .
Resumen del contenido incluido en la página 2
L5CL2_XE_US(INSTRUCTION).book 1 ページ ２００８年８月２５日 月曜日 午後３時４３分 Information To User This equipment has been tested and found to For US and Canadaian Users comply with the limits for a Class B digital device, Safety Guard pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable CAUTION protection against harmful interference in a RISK OF ELECTRIC SHOCK residential installation. This equipment DO NOT OPEN generates, uses and can radiate radio frequency CAUTION: TO R
Resumen del contenido incluido en la página 3
L5CL2_XE_US(INSTRUCTION).book 2 ページ ２００８年８月２５日 月曜日 午後３時４３分 For EU Users For Russian Users This product certified by official Please note: certification company which is Your SANYO product is designed and manufactured with high quality authorized by Russian Federation. materials and components which can ДЛЯ ПО ЛЬ ЗО В А ТЕЛЕЙ be recycled and reused. РО ССИЯ This symbol means that electrical and Данная про д у к ция electronic equipment, at their end-of-life, should be disposed of с е р
Resumen del contenido incluido en la página 4
L5CL2_XE_US(INSTRUCTION).book 3 ページ ２００８年８月２５日 月曜日 午後３時４３分 Parts Names and Functions ■Power/Error indicator Power ON : Lit (Startup time: 30 sec) Power OFF : Off Error (failure) : Blinks MEMO: To enable the power indicator, via the network, set [POWER LED (FRONT)] to "ON" on the OPTION SETTINGS screen. ■Side Face SD card SD card slot Side cover After configuring settings, close the cover. Be sure to secure the cover with the supplied screw. Operation Buttons MENU SET RESET A B C D E A
Resumen del contenido incluido en la página 5
L5CL2_XE_US(INSTRUCTION).book 4 ページ ２００８年８月２５日 月曜日 午後３時４３分 ■Rear Face & For connections, see pages 11 and 12. 1 ALARM IN 1 ALARM POWER 2 IN 2 ALARM OUT lamp ALARM IN 1 ALARM SD ALARM OUT IN 2 OUT POWER A B C D E DC ZOOM COM GND 12V FOCUS AC24V LAN EX-HDD 3 ZOOM COM FOCUS 6 5 4 1Control terminals 2SD OUT connector (BNC type) When connecting the cable, press and hold Outputs SD (Standard Definition) video. down the protrusion of the terminal, insert the cable into the terminal, and then releas
Resumen del contenido incluido en la página 6
L5CL2_XE_US(INSTRUCTION).book 5 ページ ２００８年８月２５日 月曜日 午後３時４３分 What You Can Do Network Monitoring System Recording and Playing back Live Video By connecting the camera to your PC via LAN cable, you can operate various b Recording functions required for monitoring from Media (an SD card or external hard disk) your PC’s Web browser (Internet can be installed on the camera to enable Explorer) via the network. recording of live video when an alarm is detected. Still image and video are recor
Resumen del contenido incluido en la página 7
L5CL2_XE_US(INSTRUCTION).book 6 ページ ２００８年８月２５日 月曜日 午後３時４３分 Alarm Functions b Detection b Notification The camera has a built-in motion sensor. When an alarm is detected, you can receive the image data as e-mail The face detection function works in attachment. conjunction with the motion sensor to detect presence of human. Not detected Detected A buzzer or lamp can be used to notify you of detection of alarm when you are in a Two types of alarm input, such as door distant place f
Resumen del contenido incluido en la página 8
L5CL2_XE_US(INSTRUCTION).book 7 ページ ２００８年８月２５日 月曜日 午後３時４３分 Network Settings Procedure ■Checking the Operating Environment PC : IBM PC/AT and compatibles OS : Windows XP Professional/Windows Vista CPU : Core2Duo E6700 2.66 GHz or higher Memory : Windows XP : 1GB or more Windows Vista : 2GB or more Network interface : 100Base-TX /1000Base-T (RJ-45 connector) Graphics processor : ATI RADEON HD2600 series or higher nVIDIA GeForce 8600 series or higher nVIDIA Quadro FX550 series or highe
Resumen del contenido incluido en la página 9
L5CL2_XE_US(INSTRUCTION).book 8 ページ ２００８年８月２５日 月曜日 午後３時４３分 Connections Connection when Using PoE (Power over Ethernet) Power Supply This camera provides simultaneous delivery of video in the JPEG and H.264 formats and also bi-directional video between the camera and PC. ● Do not use the power supply of the camera. ● Do not supply power to the PoE hub or PoE power adapter until the camera installation is finished. A Connect the camera to the LAN through a switching hub using shielded LAN cab
Resumen del contenido incluido en la página 10
L5CL2_XE_US(INSTRUCTION).book 9 ページ ２００８年８月２５日 月曜日 午後３時４３分 Connections Connection when Not Using PoE (Power over Ethernet) Power Supply PC A Internet C LAN connection connection (&P10) Switching hub Router or ADSL modem ✱1 ✱1 B Direct connection LAN cable LAN cable (straight type) (straight type) LAN cable (crossover type) Power Supply (AC24V/DC12V) ✱1 HDMI SD OUT HD Monitor ✱1: LAN cable: CAT5 or higher, straight type, 100 m / 109 yds max. Camera Control Unit Monitor 9
Resumen del contenido incluido en la página 11
L5CL2_XE_US(INSTRUCTION).book 10 ページ ２００８年８月２５日 月曜日 午後３時４３分 About the “A Internet connection” Port forwarding for the video port (HTTP/UDP) must be enabled on the broadband router. For details on how to set port forwarding, please refer to your router's Instruction manual. b Port 1: JPEG/H.264 HTTP Port number (default): 80 (TCP) Port number (default): 80 (TCP) IP address (default): 192.168.0.2 Set to same value as on LAN To LAN port To WAN port Router b Port 2: H.264 UDP Unicast Port numbe
Resumen del contenido incluido en la página 12
L5CL2_XE_US(INSTRUCTION).book 11 ページ ２００８年８月２５日 月曜日 午後３時４３分 Connections Do not connect the power cord until all other connections have been completed. Camera Control Unit Connection for Zoom/Focus (Options:VAC-70) +6V/12V (FAR) (FOCUS) -6V/12V (NEAR) BNC type ✱1 ALARM IN 1 ALARM SD ALARM OUT IN 2 +6V/12V (WIDE) OUT POWER ✱2 (ZOOM) -6V/12V (TELE) DC ZOOM COM GND 12V FOCUS AC24V LAN EX-HDD Alarm Signal Input b ALARM IN 1 (“1” is selected) Alarm (IN1) input signal (COM) b ALARM IN 2 (“2” is selec
Resumen del contenido incluido en la página 13
L5CL2_XE_US(INSTRUCTION).book 12 ページ ２００８年８月２５日 月曜日 午後３時４３分 Monitor Connection Thicker than RG-6U (5C-2V): 500 m / 547 yds. max. Using different cables from those specified here may attenuate the (Non-PoE power supply) POWER ✱2 video and/or sync signals and interfere with correct transmission. Power Supply Connection DC 12V To prevent a fire hazard use any UL listed wire rated VW-1. GND GND ~ ~ AC 24V ~ ~ Check that +/- polarity is correct. LAN Connection – – DC 12V PC + + ✱2 Thicker than
Resumen del contenido incluido en la página 14
L5CL2_XE_US(INSTRUCTION).book 13 ページ ２００８年８月２５日 月曜日 午後３時４３分 Viewing Live Video When the camera is turned on, live video is displayed on the monitor. The following information also appears. The display position can be selected from 12 positions on the TV OUT SETTINGS screen via the network. Camera title Recording/downloading status Set on NETWORK SETTING screen via the network. Zoom magnification Network Camera x1.0 Network Camera x1.0 Network Camera x1.0 EE01 REC
Resumen del contenido incluido en la página 15
L5CL2_XE_US(INSTRUCTION).book 14 ページ ２００８年８月２５日 月曜日 午後３時４３分 Menu Screen List The settings below can be configured on the menu of the camera unit. Configure other settings on the Web-version menu screen. &P15 Network Settings DHCP OFF IP ADDRESS SET y SUBNETMASK SET y GATEWAY SET y NETWORK SPEED NO LIMIT PORT 00080 MENU DEFAULT OFF [MENU]_(MAIN MENU) Recording Media Settings &P16 Main Menu CAPACITY FORMAT SD : 2GB NEW ON NETWORK SET NNETWORK SET ETWORK SET SET SSET ET yy EX-HDD
Resumen del contenido incluido en la página 16
L5CL2_XE_US(INSTRUCTION).book 15 ページ ２００８年８月２５日 月曜日 午後３時４３分 Setting up the network information of the camera DHCP : OFF Network Speed (bandwidth limitation) : NO LIMIT IP Address : 192.168.0.2 Port Number : 80 Subnet Mask : 255.255.255.0 Gateway : 192.168.0.1 If you wish to use the default settings, the settings below are not necessary. Select [NETWORK SET] with the jl Select [NETWORK SPEED] with the jl 1 5 buttons and press the SET button. buttons and press the
Resumen del contenido incluido en la página 17
L5CL2_XE_US(INSTRUCTION).book 16 ページ ２００８年８月２５日 月曜日 午後３時４３分 Formatting the Recording Media An SD card or external hard disk can be installed on the camera to record live video. Format the media before use. ● Installing an SD Card or External Hard Disk in the Camera & Please refer to your media’s Instruction manual. When the media is formatted on the camera menu screen, the size of the normal recording area and that of the alarm recording area are automatically a
Resumen del contenido incluido en la página 18
L5CL2_XE_US(INSTRUCTION).book 17 ページ ２００８年８月２５日 月曜日 午後３時４３分 Setting a Password A password can be set to restrict access to the camera menu screen. ■ Setting the Password ■ Changing the Password [PASSWORD LOCK] [PASSWORD CHANGE] Select [PASSWORD] in the main menu Select [PASSWORD] in the main menu 1 1 with the jl buttons and press the SET with the jl buttons and press the SET button. button. PASSWORD LOCK OFF y PASSWORD LOCK ON y PASSWORD CHANGE SET y PASSWORD CHANGE SET y Select [PASSWORD LO
Resumen del contenido incluido en la página 19
L5CL2_XE_US(INSTRUCTION).book 18 ページ ２００８年８月２５日 月曜日 午後３時４３分 Using the Supplied CD-ROM ■ Software The supplied CD-ROM contains the application software shown below. These applications can be installed to expand the scope of use of the data recorded through the camera. ● DLViewer_HDCDownloader This is software for downloading and playing back video data (JPEG/H.264) recorded through the camera. & Page 19 of this manual. ● VA-SW3050Lite This is monitoring software for use with Sanyo’s cameras.
Resumen del contenido incluido en la página 20
L5CL2_XE_US(INSTRUCTION).book 19 ページ ２００８年８月２５日 月曜日 午後３時４３分 Downloading and Playing back Recorded Video - Using "DLViewer_HDCDownloader" Software - This camera allows live video to be recorded. The supplied software can be used to download live video recorded through the camera to your PC for playback. ■ HDC Downloader (Software for Downloading)&P20 Video data recorded on an SD card or hard disk can be downloaded to a PC. You can select JPEG or H.264. You can search for video data to be d
