Resumen del contenido incluido en la página 1
Resumen del contenido incluido en la página 2
Product name: Speed Dome Camera (SD61x2V) Release Date: 2006/04/17 Manual Revision: 1.01 Web site: www.vivotek.com Email: technical@vivotek.com sales@vivotek.com Made in Taiwan. ©Copyright 2000-2006. All rights reserved - 1 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532
Resumen del contenido incluido en la página 3
Before You Use This Product The use of surveillance devices may be prohibited in your country by law. The Network Camera is not only a high-performance web-ready camera but also can be part of a flexible surveillance system. It is the user’s responsibility to ensure that the operation of such devices is legal before installing this unit for its intended use. It is important to first verify that all contents received are complete according to the list in the "Package Contents
Resumen del contenido incluido en la página 4
Package Contents SD61x2V Hard Ceiling Mount DC Power adapter Software CD Data Cable Quick installation guide Alarm Cable Warranty card Fixing Plate - 3 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532
Resumen del contenido incluido en la página 5
Table of Contents Before You Use This Product....................................................................2 Package Contents ....................................................................................3 Table of Contents............................................................................................ 1 Installation..............................................................................................4 Hardware Installation ......................
Resumen del contenido incluido en la página 6
Select for Motion JPEG............................................................. 28 Opening Accounts for New Users .................................................... 29 Protect Network Camera by Passwords....................................... 29 More Flexible Options for Viewers.............................................. 30 Build a Multimedia Web Attraction Site............................................. 30 Demo on Multiple Sites – Mid-scale Service..................
Resumen del contenido incluido en la página 7
Sequential Operation .................................................................... 60 Viewing System Log ........................................................................... 62 Viewing System Parameters ................................................................ 62 Factory Default .................................................................................. 62 Appendix .......................................................................................
Resumen del contenido incluido en la página 8
Installation Hardware Installation Please verify that your product package contains all the accessories listed in the foregoing Package Contents. Depending on the user’s application, an Ethernet cable may be needed. The Ethernet cable should meet the specs of UTP Category 5 and not exceed 100 meters in length. Connect the power adapter jack to the Network Camera before plugging in to the power socket. This will reduce the risk of accidental electric shock. Upon powering up, t
Resumen del contenido incluido en la página 9
Pin Cable Color Definition 2 White ALM NO 4 Black ALM NC 6 Green ALM COM 11 Green/Black ISOG 12 Purple ALM-1 13 Gray ALM-3 14 Red ALM-2 15 Blue ALM-4 16 Blue/White ALM-5 17 Brown/White ALM-6 18 Red/White ALM-7 19 Purple/White ALM-8 20 Black/White ALM GND Indoor Dome Installation Generally, indoor dome is mounted to ceiling. There are two kinds of indoor dome installation are given as follows. Hard Ceiling Mounting Here lists the items and tools needed to moun
Resumen del contenido incluido en la página 10
Tools Needed: 1. Tool for drilling 2. Screw Driver Follow the steps to install the high speed dome camera for hard ceilings. STEP 1 Screw the Fixing Plate to your dome body. STEP 2 Remove the Hard Ceiling Mount from the Decoration Cover. STEP 3 Attach the Mount to the ceiling. Mark the locations where all three ceiling holes should go. STEP 4 Drill these holes on the hard ceiling. - 6 - www.vivotek.com T: 886-2-82455282 F: 886-2-8245553
Resumen del contenido incluido en la página 11
STEP 5 Fix the Mount with three screws. STEP 6 Connect the data cable through the center hole of the Mount to the dome body. NOTE: If use an IP dome, a network cable is needed other than the data cable. STEP 7 Attach the dome body to the Mount and rotate the dome body clockwise. Tighten the fixing screw on the fixing plate. - 7 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532
Resumen del contenido incluido en la página 12
STEP 8 Assemble the Decoration Cover to the Mount. Completion In-Ceiling Mounting Here lists the items and tools needed to mount the dome camera into the ceilings. The supplied items are all in the dome camera package. Items Needed: 1. Dome Camera 2. T-Bar (Accessory) 3. Red Sticker (Accessory) 4. 50-cm Data Cable (Supplied) 5. Network Cable (for IP Dome---Self-prepared) NOTE: The length of RJ-45 connector should be no longer than 2 cm. Tools Needed: 1. Tool
Resumen del contenido incluido en la página 13
STEP 1 Place the Red Sticker on the ceiling plate, and cut the circle part out of the ceiling. STEP 2 Put up the T-Bar into the ceiling hole. Note that the T-Bar wings should be inward when putting up the T-Bar into the ceiling hole, as shown in the picture. STEP 3 Rotate the T-Bar’s wings to fix the T-Bar at the edge of the ceiling hole. STEP 4 Tighten the screws on the wings. - 9 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532
Resumen del contenido incluido en la página 14
STEP 5 Connect the data cable to the dome body through the center hole of the bracket. Note: If use an IP dome, a network cable is needed other than the data cable. STEP 6 Mount the dome body onto the bracket and rotate it clockwise. - 10 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532
Resumen del contenido incluido en la página 15
STEP 7 Assemble the Decoration Cover to the T-Bar. Completion To install in Ethernet Make sure the Ethernet is firmly connected to a switch hub. After attaching the Ethernet cable plug in the power adapter. If the LED turns out to be steady green after self-test, go to next paragraph “Software Installation”. Consult with the dealer of the peripherals for correct installation. 1 DI+ INPUT (Max. 50mA, 12VDC) 2 DI- INPUT (Initial state of DI is low) 3
Resumen del contenido incluido en la página 16
Software Installation In this manual, "User" refers to whoever has access to the Network Camera, and "Administrator" refers to the person who can configure the Network Camera and grant user access to the camera. At the end of the hardware installation, the Administrator must place the product software CD into the CD-ROM drive of the PC running in MS Windows. An auto-run program will pop up (If the program is not on auto-run, go to the root directory of the software CD and c
Resumen del contenido incluido en la página 17
Upon Installation Wizard’s start up, a searching box will pop up. This program searches for Vivotek’s product on the same LAN: After searching, Vivotek Video Servers or Network Cameras will be located by the Installation Wizard. There may be several entries shown in the window. The Administrator may differentiate the Network Cameras with the serial number. For the series number in the “Serial Number” field, please check the label on the bottom of the camera.
Resumen del contenido incluido en la página 18
The IP addresses shown in the "Current IP Address" field reflect those on the local network. They may be from the DHCP server. If there is no DHCP server, the camera will try to find a free IP address (this takes from 15 second to 3 minutes, depending on the LAN status). The method of finding IP address is seeking from 192.168.0.99, to 192.168.0.254. If any of the address inside this range is free, the Network Camera will be assigned to this IP address, and its subnet
Resumen del contenido incluido en la página 19
For more detailed usage of the Installation Wizard, please refer to the user’s manual of the Installation Wizard. - 15 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532
Resumen del contenido incluido en la página 20
Initial Access to the Network Camera Installing Plug-in For the initial access to the Network Camera in Windows, the web browser may prompt for permission to install a new plug-in for the Network Camera after a period of time of downloading. Permission request depends on the Internet security settings of the user’s PC or notebook. If the highest security level is set, the computer may prohibit any installation and execution attempt. This plug-in has been registered for certi
