Resumen del contenido incluido en la página 1
INSTRUCTION MANUAL
CCD COLOR CAMERA
IK-DF01A
Please read this manual thoroughly before use, and keep it handy
for future reference.
Record in space provided below the Model No. and
the Serial No. as found on the label on the bottom
of this unit.
Model. No. IK-DF01A Serial No.
Retain this information for future reference.
TABLE OF CONTENTS
Important safeguards
1. Features & Description ................................................. 3
2. Cautions.................................................
Resumen del contenido incluido en la página 2
IMPORTANT SAFEGUARDS 1. Read Instructions 12.Lightning All the safety and operating instructions should For added protection for this video product during be read before the product is operated. a lightning storm, or when it is left unattended and 2. Retain Instructions unused for long periods of time, unplug it from The safety instructions and instruction manual the wall outlet and disconnect the power supply should be retained for future reference. and cable system. This will prevent damage to
Resumen del contenido incluido en la página 3
• The CAUTION label, shown on the left, is attached on the camera. CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK. DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightening flash with arrowhead WARNING : symbol, within an equilateral triangle, TO REDUCE THE RISK OF FIRE OR is intended to alert the user to the ELECTRIC SHOCK, DO NOT EXPOSE presence of uninsulated “dangerous THIS APPLIANCE TO RAIN OR voltage” within the product’s
Resumen del contenido incluido en la página 4
1. FEATURES & DESCRIPTION : IK-DF01A has following function. (1) Quick install Design- you can manually set the camera direction. (2) Built in vari-focal lens with auto-iris Focal length 2.8~5.8mm (3) Incorporated 1/4type CCD image sensor gives high resolution and excellent sensitivity 480 lines horizontal resolution 0.5 lx minimum illumination with smoke cover (4) 50dB Signal-To Noise Patio (5) Power supply- AC24V or DC12V - This camera automatically detects the power. (6) BLC, AGC, and Line-Lo
Resumen del contenido incluido en la página 5
4. PART NAMES & FUNCTIONS : Knockout Power Input Cable Cut with a knife or scissors Connect the power and insert the cables through cable to AC24V or the knockout so the cables will DC12V. (RED:+12, not pinched when installed. Black:GND) VIDEO Cable (BNC Tap) Connect the Video Cable to a monitor or video device. The image is outputted when powered on. Zoom Lever Changes the picture range. "Bottom" mark Its screw design allows The "Bottom" mark indicates the locking capability. lens posi
Resumen del contenido incluido en la página 6
5. CONNECTIONS AND OPERATIONS : Notes on connecting • Power plugs connected equipment must be disconnected before installations. • A 75-ohm coaxial cable (3C-2V or 5C-2V) is required for standard connection. • For details of wiring and operation of equipment to be connected, refer to their operation manuals. • Coaxial cables for video signals and the power cord are not supplied with the camera. Refer to the operations manuals of connected equipment for detailed wiring and overall operation instr
Resumen del contenido incluido en la página 7
5-2 Line-Lock Control • Matching the vertical synchronization with the power frequency is called the Line- Lock. • This function is activated when the SYNC menu is selected to LL. • When two or more cameras are switched by the video switcher for viewing by a monitor TV, the vertical sync. phase can be locked with the power frequency, and a stable vertical sync. is obtained without being disturbed at the time of switching. Video Monitor VIDEO SWITCHER CAMERA1 TO AC 24V UL Listed class 2 power sup
Resumen del contenido incluido en la página 8
6. Installations : (1) Turn the cover left to unfasten it. (2) Connect the cable of the camera and the cable from the designated power supply with respective BNC connectors. (3) Fix the camera base to the ceiling firmly with the attached 2 screws. Otherwise it might drop and cause injury. Note : • The camera’s weight is about 290g. • The attached screws are designed to install the camera to a board. When installing to a surface of other materials, prepare the screws to fix it firmly. • The screw
Resumen del contenido incluido en la página 9
6-2 Installing to Wall The camera head at shipping is set for installing the camera to the ceiling. The camera head angle should be changed when installing to a wall. Camera Head 2 "Bottom" Mark 1 Tilt Range (1) Turn 2 screws of to unfasten the camera head. 1 Note : • The camera head is connected to the inside with cable, do not pull it with strength. Otherwise the inner connector may be broken and the image may not appear. (2) Reverse the camera head 180° from default setting and install it. T
Resumen del contenido incluido en la página 10
7. LINE LOCK PHASE When a video switcher switches two or more cameras, the picture may fluctuate on the video monitor due to the different AC line phase of each camera. In this case, adjust the V PHASE controller to get a stable image. V PHASE CONTROL 8. NOTE ON USE AND INSTALLATION • Do not aim the camera at the sun Do not aim the camera at the sun or point it at sun even if you are not shooting. • Do not shoot intense light Intense light such as a spotlight may cause a bloom or smear. A vertic
Resumen del contenido incluido en la página 11
9. IN CASE OF PROBLEMS Condition Check Points No image • Are the camera and connected equipment turned on? • Is the mode setting switch DC/AES set to OFF? Be sure to set to ON. • Are cables connected correctly? Unnatural color • Is the monitor TV adjusted correctly? • Is the lighting too weak? The image is out of • Is the lens focus adjusted? focus. • Is the lens or cover dirty? • Are there any large barrier or bright illumination near the The image is dark. camera? • Is the lens iris adjustment
Resumen del contenido incluido en la página 12
10.SPECIFICATIONS 1. Image System Image Device 1/4” IT CCD Pixel Elements 768 (H) x 494 (V) 2. Electrical TV System 2:1 Interlace, 15.734KHz Horizontal, 59.94Hz Vertical Horizontal Resolution 480 TV lines S/N Ratio 50dB (TYP. AGC Off, Weight On) Minimum Illumination 0.2 lux (More than 10% of image output, Clear cover) 0.5 lux (More than 10% of image output, Smoke cover) Auto Gain Control (AGC) Average AGC (24dB) Iris Control Mode Auto Iris Lens White Balance Auto White Balance Range 2500°K ~ 100
Resumen del contenido incluido en la página 13
φ5 11. EXTERIOR VIEW φ110 83.5 Unit : mm - 12 - 96
Resumen del contenido incluido en la página 14
2-hold φ3.2 (1/8") driver, depth about 40mm. Wall 2-TP4 X 37 - 13 -
Resumen del contenido incluido en la página 15
- 14 -
Resumen del contenido incluido en la página 16
