Manual de instrucciones de Toshiba IK-6550A

Resumen del contenido incluido en la página 1

INSTRUCTION MANUAL
CCD COLOR CAMERA
IK-6550A
Please read this manual thoroughly before use, and keep it handy
for future reference.
Record in space provided below the Model No. and
the Serial No. as found on the label on the bottom
of this unit.
Model. No. IK-6550A Serial No.
Retain this information for future reference.
TABLE OF CONTENTS
IMPORTANT SAFEGUARDS................................................ 2
1. FEATURES & DESCRIPTION ...................................... 4
2. COMPONENTS .......

Resumen del contenido incluido en la página 2

IMPORTANT SAFEGUARDS 1. Read Instructions 13.Lightning All the safety and operating instructions should be read For additional protection on this video product during before the product is operated. a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall 2. Retain Instructions The safety instructions and instruction manual should outlet and disconnect the power supply and cable system. This will prevent damage to the video product be retained

Resumen del contenido incluido en la página 3

• The CAUTION label, shown on the left, is attached on the camera. CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK. DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightening flash with arrowhead WARNING : symbol, within an equilateral triangle, TO REDUCE THE RISK OF FIRE OR is intended to alert the user to the ELECTRIC SHOCK, DO NOT EXPOSE presence of uninsulated “dangerous THIS APPLIANCE TO RAIN OR voltage” within the product’s

Resumen del contenido incluido en la página 4

1. FEATURES & DESCRIPTION 1. 24V AC/12V DC dual-voltage capable extends power choice. 2. Setting and adjustments are made by way of on-screen menu. (Menu Driven Set-Up) 3. Camera has the ability to automatically switch the display to color in daylight or black and white at night. 4. Camera synchronization mode is selectable between internal and line-lock. 5. The shutter speed is automatically adjusted according to the subject brightness. 6. Back Light Compensation (BLC) adjusts for strong backli

Resumen del contenido incluido en la página 5

3. PART NAMES & FUNCTIONS - 5 - Auto -IRIS Terminal If using an auto iris lens, connect Left side View it to this terminal. Focus ring: Rotate the ring to Top View adjust back focus. AES / VIDEO / DC select switch: AES Auto electronic shutter function. VIDEO : When using Al lens (with amp). DC : When using AI lens (without amp). Focus Lock Screw Video output terminal: Lens: Connect to a display or Mount a CS-mount lens capture device. Front View Right Side View Rear View LEVEL: DC - Type AI

Resumen del contenido incluido en la página 6

4. CAMERA INSTALLATION Wall Installation Example 9.5 mm 1/4"-20UNC 112 15 The installation guide is for reference only. Mounting backet is not included. - 6 - 4 6 80

Resumen del contenido incluido en la página 7

5. CONNECTIONS AND OPERATIONS Notes on connecting •Power plugs of connected equipment must be disconnected before installations. •A 75-ohm coaxial cable with connector (3C-2V or 5C-2V) is required for standard connection. •For details of wiring and operation of equipment to be connected, refer to their operation manuals. • Lens, power supply with cable, connectors and coaxial cable are not supplied with the camera. 5-1. Basic connection Single system configuration MONITOR TV CAMERA AC 120V ( ) P

Resumen del contenido incluido en la página 8

5-2. Line-Lock Control • Matching the vertical synchronization with the power frequency is called the Line-Lock. • This function is activated when the SYNC menu is selected to LL. • When two or more cameras are switched by the video switcher for viewing by a monitor TV, the vertical sync. phase can be locked with the power frequency, and a stable vertical sync. is obtained without being disturbed at the time of switching. MONITOR TV CAMERA1 CAMERA2 VIDEO SWITCHER TO 24V AC UL Listed Class 2 pow

Resumen del contenido incluido en la página 9

6. LENS Back-Focus Adjusment Back-Focus is adjusted at the factory to accommodate most standard lenses. However, at times, slight adjustment to the IK-6550A back- Focus Lock Screw focus is necessary. Loosen the Focus Lock Screw. Achieve a clear image by rotating the focus ring. Afterwards, tighten the Focus Lock Screw. Focus ring This camera supports two types of auto-iris lens: Video- IRIS type and DC (direct drive) types. Connect the auto-iris connector plug to the IRIS terminal on the side of

Resumen del contenido incluido en la página 10

7. LINE-LOCK PHASE If two or more cameras within a system have different AC line phases are switched by the video switcher, the picture on the monitor TV will fluctuate vertically. Connect 24V AC input lines of all cameras so that they all share the same phase. If you still have vertical fluctuation, adjust the V.PHASE controller. V. PHASE CONTROLLER - 10 -

Resumen del contenido incluido en la página 11

8. MENU-DRIVEN SET-UP The setting menus of hierarchy are shown below and with on-screen character displays. MENU CAMERA SETUP D/N MODE AUTO COLOR B/W D/N LEVEL LOW MID HIGH SHUTTER AUTO 1/60 1/100 1/250 1/500 1/1K 1/2K 1/4K 1/10K 1/100K GAIN OFF STD HIGH SYNC INT LL BLC OFF BLC1 BLC2 BLC3 BLC4 SHARPNESS LOW MID HIGH WB AUTO INDOOR OUTDOOR R:0~63 B:0~63 DNR LOW MID HIGH CHROMA 0 ~ 7 BACK BACK PRIVACY ZONE ZONE 1 ~ 8 OFF ON BACK CAMERA ID CAMERA ID ID POS OFF TOP BOTTOM BACK EXIT CANC

Resumen del contenido incluido en la página 12

8-1. Setting switches and the functions On the side panel of the cameras there are three push button switches as shown below: Switch name Main function SELECT switch Setting mode call on/off, setting entry button Setting item selection (down) button Setting item selection (up) SELECT switch button button - 12 -

Resumen del contenido incluido en la página 13

8.2 Setting mode call and basics Press the SELECT switch down about 2 seconds then menu will appear on the display. Use the buttons to select . EXIT CANCEL DEFAULT 8-2-1. D/N MODE (DAY/NIGHT MODE) Selections: D/N MODE AUTO AUTO (default): The camera will sense the brightness D/N LEVEL LOW level and switches to color mode or SHUTTER IRIS monochrome mode. GAIN STD COLOR: Color mode SY

Resumen del contenido incluido en la página 14

8-2-2. D/N LEVEL (DAY/NIGHT LEVEL) Selections: D/N MODE AUTO LOW (default): The chroma cut level is set less than D/N LEVEL LOW 20 to 30 IRE. SHUTTER IRIS MID: The chroma cut level is set less than GAIN STD 30 to 40 IRE. SYNC INT HIGH: The chroma cut level is set less than BLC OFF 40 to 50 IRE. SHARPNESS MID WB AUTO Process: 1. Position the cursor ( ) next to CAMERA SETUP BACK and press the SELECT switch to

Resumen del contenido incluido en la página 15

8-2-4. GAIN (AGC) Selections: D/N MODE AUTO OFF: AGC does not operate. D/N LEVEL LOW STD (default): Standard position, max gain = 24dB SHUTTER IRIS HIGH: High-Sensitivity position, max gain = GAIN STD 30dB SYNC INT BLC OFF Process: SHARPNESS MID 1. Position the cursor ( ) next to CAMERA SETUP WB AUTO and press the SELECT switch to access the camera menu. BACK 2. Position the cursor ( ) next to GAIN and pres

Resumen del contenido incluido en la página 16

8-2-6. BLC (BACK LIGHT COMPENSATION) Selections: D/N MODE AUTO When using the automatic electronic iris with an auto D/N LEVEL LOW iris lens, the exposure adjustment is automatically SHUTTER IRIS performed so that the best picture is obtained at the GAIN STD next monitor zone. SYNC INT The four different BLC zones are displayed below: BLC OFF SHARPNESS MID Process: WB AUTO 1. Position the cursor ( ) next to CAMERA S

Resumen del contenido incluido en la página 17

8-2-7. SHARPNESS Selections: D/N MODE AUTO Adjust the outline correction. D/N LEVEL LOW LOW: to make the outline softer. SHUTTER IRIS MID (default): to make the outline standard. GAIN STD HIGH: to make the outline clearer SYNC INT BLC OFF Process: SHARPNESS MID 1. Position the cursor ( ) next to CAMERA SETUP WB AUTO and press the SELECT switch to access the camera menu. BACK 2. Position the cursor ( ) next

Resumen del contenido incluido en la página 18

8-2-9. (1) DNR (DIGITAL NOISE REDUCTION) Selections: DNR MID LOW: Enables minimum noise reduction. CHROMA 3 MID (default): Enables standard noise reduction. BACK HIGH: Enables maximum noise reduction. Process: 1. Position the cursor ( ) next to CAMERA SETUP and press the SELECT switch to access the camera menu. 2. Position the cursor ( ) next to OPTION and press the SELECT switch to access menu. 3. Position the cursor ( ) next to DNR and press the SELECT switch

Resumen del contenido incluido en la página 19

(3) BACK Position the cursor ( ) next to BACK and press the DNR MID SELECT switch to exit OPTION menu. CHROMA 3 BACK 8-2-10. BACK Position the cursor ( ) next to BACK and press the D/N MODE AUTO SELECT switch to exit CAMERA SETUP menu. D/N LEVEL LOW SHUTTER IRIS GAIN STD SYNC INT BLC OFF SHARPNESS MID WB AUTO BACK - 19 -

Resumen del contenido incluido en la página 20

8-2-11. Press the SELECT switch down about 2 seconds then menu will appear on the display. Use the buttons to select . EXIT CANCEL DEFAULT Process: 1. Position the cursor ( ) next to PRIVACY ZONE ZONE 1 OFF and press the SELECT switch to access the menu. ZONE 2 OFF 2. Position the cursor ( ) next to ZONE 1 ~ 8 and ZONE 3 OFF press the SELECT switch to access menu. ZONE 4 O