Resumen del contenido incluido en la página 1
Cover Page
TRENDnet User’s Guide
Resumen del contenido incluido en la página 2
Table of Contents TRENDnet User’s Guide Contents Product Overview .................................................................................2 Package Contents .............................................................................................................2 Features ............................................................................................................................2 Product Hardware Features ............................
Resumen del contenido incluido en la página 3
TV-IP302PI TRENDnet User’s Guide Product Hardware Features Product Overview Camera Overview Shield IR Lens TV-IP302PI Package Contents Camera Stand TV-IP302PI Multi-Language Quick Installation Guide CD-ROM (Utility, Software & User's guide) Power adapter (12V DC. 1A) (1.5M / 5 ft.) Network cable (1.5 M/ 5 ft.) Shield: It is used to protect the camera for the inclement weather. RJ-45 coupler IR Lens: IR lens for the camera. Came
Resumen del contenido incluido en la página 4
TV-IP302PI TRENDnet User’s Guide Application Diagram Camera Connectors Speaker GPIO Ethernet /PoE Microphone BNC Power Out Port In Connector Port Video Out Power Connector: Connects the power adapter to supply power to the camera if using non-PoE connection BNC Video Out: Connect a CRT monitor or handheld monitor. Microphone In: Connects an external microphone to receive the on-the-spot . sound where the camera is installed Ether
Resumen del contenido incluido en la página 5
TV-IP302PI TRENDnet User’s Guide 2. Once both notches are aligned with the shield, slide th4e shield forward. Installation Hardware Installation Shield Installation 1. Align the notches on the sides of the IP camera to the shield. 3. Adjust the IP camera to fit the shield. © Copyright 2014 TRENDnet. All Rights Reserved. 4
Resumen del contenido incluido en la página 6
TV-IP302PI TRENDnet User’s Guide Bracket Installation Camera Installation 1. Turn and lock the bracket into the mounting hole of IP camera. Use screws to fix 1. Insert the Installation CD-ROM into your computer’s CD-ROM drive to initiate the the bracket to ceiling or wall, and turn the knob tightly to fix the angle of camera. Auto-Run program. Click the Install Camera. LED Indicator The green LED will be flash when power on the camera and if there is the data trans
Resumen del contenido incluido en la página 7
TV-IP302PI TRENDnet User’s Guide 3. Plug in and connect the power adapter to the camera. If you are using the PoE to 5. Wait while camera is searching. supply power to the camera, please skip to the next step. Click Next when you are done. 6. The founded cameras will show on the screen. The camera already selected by default if you have only one camera installed. If you have more than one camera in the same Network, you will need to identify the camera by the MAC I
Resumen del contenido incluido en la página 8
TV-IP302PI TRENDnet User’s Guide 7. Select "DHCP" option to assign an IP by DHCP server or Select "Fixed IP" to set IP 9. Type in the Password. The default password is “admin”. You must change the address manually. Click Next. default password of the camera. Enter the default password: admin and enter the new password. The password must be between 8 and 32 characters. (Alphanumeric: a-z, A-Z, 0-9), and confirm the new password by entering the password twice. 8. If you
Resumen del contenido incluido en la página 9
TV-IP302PI TRENDnet User’s Guide 11. Click Finish to exit the program or click Home to return to the main screen. Configuration This device also supports the Mobile App. Using your mobile device to scan the Viewing Camera Basic Function QR code to install the App. Open the Web browser on your computer (example showed in this User’s Guide is based on the Internet Explorer). In the Address bar, type the IP address you got from "Camera Installation" chapter or fo
Resumen del contenido incluido en la página 10
TV-IP302PI TRENDnet User’s Guide After you login into the live screen of the camera, the main page will appear as Speaker/Microphone: Click the "Mic" to speak out through the camera. Click the below: “Speaker” to receive the on-side sound and voice from the camera. Online Visitor: It shows how many people connect to this IP camera. Relay On: Click the Relay out "ON" to trigger the relay output for testing. click "Off" to stop triggering. To switch between these two
Resumen del contenido incluido en la página 11
TV-IP302PI TRENDnet User’s Guide Zoom: Enable zoom-in and zoom-out functions. Select “Enable digital zoom” Configuring the Camera Setting option first within the pop-up dialogue box and then drag and drop the bar to To configure the camera, click on the live screen. adjust the zoom factors. The Web Configuration contains the settings that are required for the camera in the left menu bar, including System Setting, Network Setting, Audio/Video Setting, and Event Set
Resumen del contenido incluido en la página 12
TV-IP302PI TRENDnet User’s Guide System >> System Information >> OSD Setting System Time Stamp: Enable or disable the time that will show on the live screen. Position: After enabling time stamp, you can select the position of time stamp on the live screen. Text: Enable the Text option to have the desire text show on the camera live screen. System >> System Information >> Server Information Text Edit: Click it to call out "text edit" window: Text: Key in
Resumen del contenido incluido en la página 13
TV-IP302PI TRENDnet User’s Guide System >> System Information >> Time Setting when you want to synchronize the IP camera time with PC time again, please select this option and click "Apply". Manual: Type in the date and time, and click "Apply". System >> User Management Server Time: It shows current IP camera server time. Date Format: Select the date display format. Time Zone: Select your time zone. It affect server time when you use "NTP" time. Enable
Resumen del contenido incluido en la página 14
TV-IP302PI TRENDnet User’s Guide Enable Password Protection: Firmware Upgrade: Yes: User needs to enter user name and password to stream the To update the firmware, click “Browse” to select the firmware, then click camera. “Upgrade” to proceed. Please do not disconnect power or Network cable during firmware upgrading. No: User can stream the camera without entering the username and password. System Reboot: Click Reboot to reboot the IP camera. Factory Reset: C
Resumen del contenido incluido en la página 15
TV-IP302PI TRENDnet User’s Guide Network >> Network Setting >> IP Address Setting Manually setup the IPv6 address: You can set up IPv6 manually by enter IP Address, Gateway, and DNS. DHCPv6: If you have a DHCPv6 server, enable this option to assign the IPv6 from server. The assigned IP address will be displayed IPv6 Address: A virtual IPv6 address generated by the IP camera. This virtual IPv6 address cannot use on WAN. To access the IP camera via IPv6 address, open
Resumen del contenido incluido en la página 16
TV-IP302PI TRENDnet User’s Guide Network >> Network Setting >> UPnP Network >> Network Setting >> RTSP Setting UPnP: RTSP Server: This IP camera supports UPnP (Universal Plug and Play) which is a set of Enable it, then you can access camera and get image via RTSP protocol. computer network protocols that enable the device to device interoperability If you have a media player that supports RTSP protocol, you can use it to receive UPnP Port Forwarding: the video
Resumen del contenido incluido en la página 17
TV-IP302PI TRENDnet User’s Guide Network >> Network Setting >> Multicast Setting (Based on the RTSP Server) ONVIF: Choose your ONVIF version. The two devices that use ONVIF to communicate should be set to the same version. Security: Select "Disable", then the username and password are not required when accessing the camera via ONVIF. Select "Enable", then username and password are necessary. RTSP Keepalive: When the function is enabled, the camera checks once
Resumen del contenido incluido en la página 18
TV-IP302PI TRENDnet User’s Guide Call out the Control Panel → Network and Internet → Network and Sharing Center → Click "See full map". Network >> Advanced >> HTTPS When the users access cameras via Https protocol, the transmitted information will be encrypted so that the security level is arisen. You can select the connection type. Http: user can access the camera via Http path. Https: user can access the camera via Https path but cannot via Http path. Http
Resumen del contenido incluido en la página 19
TV-IP302PI TRENDnet User’s Guide 4. According to the certificate source, there are two ways to install the certificate. If you had sent the certificate request to do sign and received a signed certificate, please click” browse” and find the certificate file in your computer. Click “Apply” to install it. If you choose to generate a self-signed certificate, fill in the following forms and set validity day, click “Apply” to finish installed it. Network >> Advanced >> SN
Resumen del contenido incluido en la página 20
TV-IP302PI TRENDnet User’s Guide SNMPv3: SNMPv1/SNMPv2 Trap: Trap is a mechanism that allows a managed device to send messages to manager instead of waiting passively for polling from the manager. Specify the trap event. When those events happen, the camera will send the ring message to the Trap Address, which is usually the manager's IP address. Trap Community means the community that can receive the trap message. Note: Trap Address must be under the same LAN with
