Resumen del contenido incluido en la página 1
IS326
USER MANUAL
© 2012 All Rights Reserved.
Windows and the Windows logo are registered trademarks of Microsoft Corporation.
All other trademarks are the property of their respective companies.
Resumen del contenido incluido en la página 2
1
Resumen del contenido incluido en la página 3
Thank you for purchasing this digital camera. Everything you need to take quality digital photos and videos is included with your digital camera. Polaroid makes capturing those special moments as easy as possible. Please read this manual carefully first in order to get the most out of your digital camera. Note: Your camera needs an SD Memory card (up to 32GB) for normal use. SD Memory cards are not included and need to be purchased separately. 1. Digital Camera
Resumen del contenido incluido en la página 4
1. Pow er Button 12. Delete / Right Button 2. Shutter Button 13. Insta-Share / Dow n Button 3. LCD Screen 14. Flash Light 4. LED 15. USB Slot 5. Zoom Out Button 16. Tripod Mount 6. Zoom In Button 17. Optical Lens 7. RESET 18. Memory Card Slot 8. MODE Button 19. Wrist Strap Connector 9. SET Button 20. Self-Timer LED Indicator 10. Scene / Left Button 21. Microphone 11. Flash / Up / Slide Show button 22. Speaker 3
Resumen del contenido incluido en la página 5
SD Memory card (up to 32GB) needed for normal use. To Charge the Battery: 1. Power off the camera. 2. Connect the camera with the USB cable to the AC charger or to the computer (as shown above). 3. Allow the battery to charge for at least 3 hours before using the first time. 4. The charge light will turn off when the battery is fully charged. 4
Resumen del contenido incluido en la página 6
When powering the camera ON for the first time the camera will take you through the initial camera setup. 1) Charging the Battery To charge your battery, first connect the USB Cable to your camera. Then follow one of the steps below: A) Charge the battery using the USB connection cable (included) and your computer: - Connect one end of the USB cable into the USB port on your camera. - Connect the other end of the USB cable to the USB port on your computer. B) Charge the batt
Resumen del contenido incluido en la página 7
Battery Power: Some features, will not work if the battery power level is low. When the battery power is low the battery icon turns red and the camera will automatically turn off a few seconds later. The energy status of the power is displayed on LCD as shown below: Full battery power Medium battery power Low battery power 2) SD Card Make sure an SD card has been properly inserted into your camera. (SD card not included.) To properly insert the SD Card: Push the SD
Resumen del contenido incluido en la página 8
After powering on your camera for the first time, you will be prompted to select a language for the camera. The Language selection menu appears. Select the language of your choice by pressing the UP and DOWN direction control buttons. Then press the SET button to confirm the selection. Once a language has been selected, you will be asked if you would like to continue with the initial camera setup. A message will appear: “Continue with Camera Setup?” Select “Yes” to continue or “No” to
Resumen del contenido incluido en la página 9
Your camera has different modes for the various camera functions. You can switch modes by pressing the MODE button on your camera after the camera has been powered ON. Use this mode to capture pictures with your camera. This is the default mode when the camera is powered ON. To take a picture, aim your camera as desired and press the Shutter button. The picture will be automatically saved to your camera’s memory card. To access the various menus for the Photo Capture mode, press the SE
Resumen del contenido incluido en la página 10
Image Sensor CMOS Sensor 4608x3456 (16M), 4000x3000 (12M), 3648x2736 (10M), Image Resolution 264x2448 (8M), 3648x2048 (7MHD), 2592x1944 (5M), 2048x1536 (3M), 1920x1080 (2MHD), 640x480 (VGA) Video Resolution 1280x720 (720P), 640x480 (VGA), 320x240 (QVGA) File Format JPEG (Photo) /AVI (Video) External Memory SD MMC SDHC (up to 32G)– SD Card not included LCD Display 2.4 Inch TFT LCD Lens f=6.2~12.4 , F3.0~4.5 Zoom 3X Optical Zoom ; 4X Digital Zoom Exposure -3.0EV ~ +3.0EV White Balance A
Resumen del contenido incluido en la página 11
To be able to download photos and videos to your PC using the Polaroid Instant Memories Software, you will need the following minimum configuration: Microsoft® Windows XP with Service Pack 3, Windows Vista with Service Pack 1 or Windows 7 Pentium® 4 processor (or above)
1 GB of RAM, with 250 MB of free hard disk space
16-bit Color monitor, 1024 X 768 recommended screen resolution
CD-ROM Drive QuickTime® 6 or higher
Microsoft® Internet Explorer 7 or higher Wind
Resumen del contenido incluido en la página 12
Make sure the built-in lithium battery has been fully charged before the first use. Make sure an SD card has been inserted into your camera. (SD card up to 32GB - SD Card not included) Please see Initial Camera Setup for more information. Press the Power button to turn your camera ON. After powering on, the camera emits a sound and the LED light turns on briefly. The LCD screen turns on with your camera in Photo Capture mode to start. While the camera is on, you can pre
Resumen del contenido incluido en la página 13
Your camera has three main modes: 1) Photo Capture Mode - Use this mode to capture photos with your camera. 2) Video Capture Mode - Use this mode to capture videos with your camera. 3) Playback Mode (for photos and videos) - Use this mode to view the photos and videos you have already taken with your camera. When the camera is first powered ON, the Photo Capture Mode will be active. The icons that appear on the LCD screen are the best default settings so that you can begin to captu
Resumen del contenido incluido en la página 14
Each camera mode has a set of menus specific to that mode. 1) Press the SET button to open the menus for the current mode. 2) Press the LEFT or RIGHT direction control button to scroll between the various menus for the current mode. 3) Press the UP or DOWN direction control button to highlight the desired menu selection. 4) Press the SET button to confirm and save the highlighted menu option. 5) If the selection can be remembered by the camera, a selection icon will appear to the rig
Resumen del contenido incluido en la página 15
Optical Digital Zoom Zoom The Photo Capture mode allows you to capture pictures with your digital camera. When the camera is first powered ON, the camera will be in Photo Capture Mode by default. 1) While in Photo Capture mode, use the LCD display on the back of the camera to direct the camera at the scene you would like to capture. 2) Press the T/Zoom In and W/Zoom Out buttons to zoom in/out if desired. Note: The actual shape of these buttons may vary per camera model. Optical
Resumen del contenido incluido en la página 16
Your digital camera has a four-directional pad that functions as Quick Function buttons: Button Function Left Scene Selection – Opens the Scene menu Flash Options – Toggles the Flash options appearing on the LCD Up (See ‘Flash Options’ below for further information.) Delete – Opens the ‘Delete This Photo’ option and allows you to view and Right delete the last photo taken Down INSTA Share – Opens the INSTA Share for Photos menu Other Captures the photo Shutter Opens
Resumen del contenido incluido en la página 17
There are several Flash options available on your camera. The options appear on the Photo Capture Mode LCD screen in sequence. To change the Flash mode, press the UP Quick Function button until you arrive at your desired settings. Important: When using Flash, stand between 8 to 10 feet away from the scene you would like to capture. Note: The MACRO mode must be turned OFF when you want to use the Flash. To change the Macro setting: Press SET to open the menus and scroll to the ‘Mac
Resumen del contenido incluido en la página 18
The following are the menus that appear in your camera’s Photo Capture Mode: 17
Resumen del contenido incluido en la página 19
The Scene Menu allows you to choose scene settings that let your camera to adapt properly to your current environment. Note: When selecting the HIGH SENSITIVITY Option, by default the camera switches off the FLASH automatically (if it’s ON) to optimize the picture quality. If however, you would like to override it and manually turn ON the flash – you can do so. 1) Press the SET button to open the menus for the current mode. 2) Press the LEFT or RIGHT direction control button to scroll and
Resumen del contenido incluido en la página 20
7) Press the MODE button to exit the menu and return to your previous mode. 8) An icon reflecting your selection will display on the LCD screen. 9) Remember that this setting will be saved by your camera until you manually change the setting or restore the camera’s default factory settings. The Image Quality menu allows you to select the desired quality level of the images taken by your camera. Keep in mind that images with a higher image quality level will also take up more memory on
