Resumen del contenido incluido en la página 1
Color CCTV Cameras
Operating Instructions
Model No. WV-CW484 Series
(Lens is option.)
WV-CW484F is shown above.
Before attempting to connect or operate this product,
please read these instructions carefully and save this manual for future use.
No model number suffix is shown in this manual.
Resumen del contenido incluido en la página 2
For Canada This Class A digital apparatus complies with CAUTION Canadian ICES-003. RISK OF ELECTRIC SHOCK DO NOT OPEN For U.S.A NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, These limits are designed to provide reasonable DO NOT REMOVE COVER (OR BACK). protection against harmful interference when the NO USER-SERVICEABLE PARTS INSIDE. equipment is operated
Resumen del contenido incluido en la página 3
Important Safety Instructions 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9) Do not defeat the safety purpose of the pola
Resumen del contenido incluido en la página 4
Limitation of Liability THIS PUBLICATION IS PROVIDED "AS IS" THIS PUBLICATION COULD INCLUDE WITHOUT WARRANTY OF ANY KIND, TECHNICAL INACCURACIES OR TYPO- EITHER EXPRESS OR IMPLIED, INCLUDING GRAPHICAL ERRORS. CHANGES ARE BUT NOT LIMITED TO, THE IMPLIED WAR- ADDED TO THE INFORMATION HEREIN, AT RANTIES OF MERCHANTABILITY, FITNESS ANY TIME, FOR THE IMPROVEMENTS OF FOR ANY PARTICULAR PURPOSE, OR THIS PUBLICATION AND/OR THE CORRE- NON-INFRINGEMENT OF THE THIRD SPONDING PRODUCT (S). PARTY'S RIGHT. Dis
Resumen del contenido incluido en la página 5
Preface Panasonic's WV-CW484 series cameras (WV-CW484F/WV-CW484S/WV-CW484FK/WV- CW484SK) introduce high picture quality by use of Super-Dynamic 1/3 inch CCD and digital signal processing LSIs. • WV-CW484F: This is a model with x2 varifocal lens. Mounting bracket and ceiling mount bracket are optional. • WV-CW484S: This is a model with x2 varifocal lens. Mounting bracket is supplied, but ceil- ing mount bracket are optional. • WV-CW484FK: Lens, mounting bracket, and ceiling mount bracket are opti
Resumen del contenido incluido en la página 6
CONTENTS Important Safety Instructions ........................................................................................................3 Limitation of Liability ......................................................................................................................4 Disclaimer of Warranty ..................................................................................................................4 Preface ................................................................
Resumen del contenido incluido en la página 7
Precautions This apparatus has no power switch. Handle the camera with care. Power is supplied from an external 12 V Do not abuse the camera. Avoid striking, DC/24 V AC power-supply device. Refer to shaking, etc. The camera could be damaged service personnel for how to turn on/off the by improper handling or storage. power. Do not touch the dome cover with your To keep on using with stable performance bare hands. • Parts of this product may deteriorate and A dirty dome cover causes deterioration
Resumen del contenido incluido en la página 8
Do not use strong or abrasive detergents • Locations subject to strong magnetic when cleaning the camera body. field or radio waves Use a dry cloth to clean the camera when • Locations where corrosive gas is pro- dirty. When the dirt is hard to remove, use a duced mild detergent and wipe gently. Then wipe • Locations where it may be damaged by off the remaining detergent with a dry cloth. briny air such as seashores • Locations where the temperature is not About the dehumidifying device within –
Resumen del contenido incluido en la página 9
Consumable parts Contact your dealer for replacement of the following part when the time comes: Cooling fan needs replacement after around 30 000 hours of operation. Do not operate the camera beyond the specified temperature, humidity or power source ratings. Use the camera at temperatures within –10 °C to +50 °C {14 °F - 122 °F}, and humidi- ty below 90 %. The input power source is 24 V AC or 12 V DC. 9
Resumen del contenido incluido en la página 10
Major Operating Controls and Their Functions q w e r t y u i o !0 !1 !2 !3 !55 !6 !4 !7 !8 !9 10
Resumen del contenido incluido en la página 11
q Power cable (12 V DC or 24 V AC) !1 Monitor output Jack (3.5 diam. mini Cautions: jack) 1. Connect to 12 V DC (10.5 - 16 V) or Connects the LCD monitor and such 24 V AC (19.5 V - 28 V) class 2 devices with 3.5 diam. 2-pole L-type plug power supply only. Make sure to for checking images. connect the grounding lead to the GND terminal when the power is !2 Optional heater connector (6 pin supplied from a 24 V AC power female) source. When an optional heater unit is installed 2. To prevent fire o
Resumen del contenido incluido en la página 12
Lens Mounting (WV-CW484FK, CW484SK) 1. Before mounting the lens, remove the protection sheet from the camera. 2. Mount the optional lens to the camera by turning the lens clockwise. 3. Insert the connector of lens into the connector of camera, and bind the connectors with the fixing band. 12
Resumen del contenido incluido en la página 13
Installations The following installation should be made by qualified service personnel or system installers. Important: • Prepare four fixing screws to be used to mount the provided camera attachment according to the material of the area where the attachment is to be installed. Recommended tightening torque is as follows. M4: 1.6 N·m {16 kgf·cm} • Do not use wood screws to fix the camera mounting bracket (option) since they are not strong enough to support the weight of the camera and the bracke
Resumen del contenido incluido en la página 14
T TOP OP Using Mounting Bracket WV-Q114 (Option) • Secure the optional camera mounting bracket to wall or ceiling, and fix the provided cam- era attachment to the mounting bracket. (Refer to the following figures.) Verify the camera attachment and mounting bracket are mounted firmly after screwing them. • When routing cables sideway or through the wall/ceiling, the mounting bracket is used. • When routing cables sideway, open the sideway cable exit unscrewing the lid by use of a hexagon wrench
Resumen del contenido incluido en la página 15
T TOP OP WV-Q114 Camera attachment (provided) 15 TOP
Resumen del contenido incluido en la página 16
How to mount the camera 1. Connect the power cable and the BNC plug of the video output cable. (Refer to p. 23 Connections.) 2. Secure the camera with four attachment fix- ing screws. 3. Fit the protrusion at the rear of camera unit in Dent the dent of camera attachment. 4. Hook the rear screws on the screw holes of camera attachment, and turn the camera unit clockwise to fix the camera unit and camera Protrusion attachment. Screw hole of camera attachment Rear screw
Resumen del contenido incluido en la página 17
4. Hook the rear screws on the screw holes of camera attachment, and turn the cam- era unit clockwise to fix the camera unit Protrusion and camera attachment. Screw hole of camera attachment Rear screw 5. Remove the dome cover from the main body by loosening the three dome cover mounting screws. The dome cover is fixed with tamper- proof screws. Loosen the three dome cover mounting screws by using the provided bit for tam- perproof screw. Note: Perform the same procedure when replacing the opti
Resumen del contenido incluido en la página 18
7. Secure the camera unit to the bracket with the camera lock screw. (The illustration describes an example using a junction box.) Camera fixing screw 8. Adjust the camera. (Refer to p. 21.) 9. Attach the dome cover to the camera. Firmly tighten the three tamper-proof screws. (Recommended torque 0.78 N·m {0.08 kgf·m} Notes: • Defocus may be caused by the reinstalled dome cover. When using a system controller, adjust the back focus on the setup menu after attaching the dome cover. • When not usin
Resumen del contenido incluido en la página 19
Waterproof Process • When routing cables sideway using Mounting Bracket WV-Q114 (option) or installing the camera under eaves, apply waterproof process to the cable and relevant portions. • The cables are not waterproofed. Provide water sealing for the tube ends and the portions between cable cores as well as connecting portions. • The use of vinyl tape or other tapes instead of the butyl tape may cause water absorption from a gap and finally condensation and water leakage. Waterproof proces
Resumen del contenido incluido en la página 20
Notes: • Surely attach a pipe fitting to the bracket to avoid exposing the cables. Otherwise, cable deterioration resulting from cable exposure may cause a short circuit. • Run the conduit downward or pull the conduit out of the side of the bracket. When pulling the conduit out of the side of the bracket, run the conduit downward once, and upward. Download • For wall installation, face the drain hole downward and do not block the hole. When rain water is accumulated in the bracket, the water blo
