Resumen del contenido incluido en la página 1
Camera/VTR
AJ- P
Operating Instructions
Resumen del contenido incluido en la página 2
RBRC FCC Note: CAUTION This device complies with Part 15 of the FCC Rules. RISK OF ELECTRIC SHOCK To assure continued compliance follow the attached DO NOT OPEN installation instructions and do not make any unauthorized modifications. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. This equipment has been tested and found to comply REFER TO SERVICING TO QUALIFIED SERVICE PERSONNEL. with the limits for a class A digital device, pur
Resumen del contenido incluido en la página 3
Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 Screen displays . . . . . . . . . . . . . . . . . . . . . . . . . . .48 Remaining battery charge and audio channel level Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 and remaining tape displays . . . . . . . . . . . . . . . .48 Features of the camera unit . . . . . . . . . . . . . . . . . .5 Displays relating to errors and warnings . . . . . . .48 Features of the VTR unit . . . .
Resumen del contenido incluido en la página 4
Contents Menu operations . . . . . . . . . . . . . . . . . . . . . . . . . .84 Basic setting menu operations . . . . . . . . . . . . . . .85 VTR MAIN MENU screen . . . . . . . . . . . . . . . . . .111 Displaying sub-menus and deciding on FUNCTION screen . . . . . . . . . . . . . . . . . . . . . . .112 settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .86 BATTERY/TAPE screen . . . . . . . . . . . . . . . . . .113 BATTERY SETTING screen . . . . . . . . . . . . .
Resumen del contenido incluido en la página 5
Introduction The AJ-HDC27F is a camera/VTR that supports the Furthermore, it is compact and lightweight, has low SMPTE-296M 1280a720 scanning standard. power consumption, and excels in achieving a high Integrated in this single unit are an HD color video level of picture quality, sensitivity, and mobility, and is camera featuring a 1-million pixel IT-CCD unit with on- extremely dust-proof and moisture-proof. These are chip lens as the pickup device, and a DVCPRO HD all attributes which enable t
Resumen del contenido incluido en la página 6
Features Features of the camera unit Prime lens mode Camera unit equipped to capture a wide range of Not only the lens that does justice to the sensitivity image creation activities from cinema production equivalent to a film but also the various devices and to broadcasting applications equipment that are peripheral to the camera combine to OA sensitivity of F12 (2000 lux) achieved by the three play roles which are so critical that they cannot be highly sensitive CCDs. divorced from the technica
Resumen del contenido incluido en la página 7
Features Features of the VTR unit Digital system Built-in DOLBY NR system The pictures are compressed by a component digital The cue audio recording circuitry contains a Dolby B recording system that uses the latest compression noise reduction circuit. technology while non-compression PCM recording Audio functions featuring excellent signal-to-noise ratio, frequency OA phantom power supply type of microphone band, waveform characteristics and reproduction of (optional accessory) with sharp direc
Resumen del contenido incluido en la página 8
System configuration Wireless Microphone kit microphone AJ-MC700P receiver WX-RJ700 Battery case BP-90 type AU-M402H battery 2.0-inch viewfinder AJ-HVF27P Sony Battery Sony BP-90 Battery case NP-1 Microphone holder AJ-MH700P NP/BP adapter plate Anton/Bauer Battery Lens (Bayonet type) V-mount FUJINON/CANON adapter plate IDX Battery E-50, E-80 Sony Battery Camera/VTR BP-L60/L90 AJ-HDC27F Rain cover SHAN-RC700 AC adapter AJ-B75 Soft carrying case AJ-SC900 Cassette tape Cleaning tape AJ-HP23LP AJ-CL
Resumen del contenido incluido en la página 9
Parts and their functions Power supply section 1 4 2 3 1Battery mount This is for attaching the Anton/Bauer battery pack. 2DC IN (external power input) socket (XLR, 4P) When operating this unit using an AC power source, this socket is connected to the model AJ- B75 AC adapter (optional accessory). 3BREAKER button To protect the equipment, the circuit breaker is tripped when an overcurrent flows inside the unit, and the power is automatically turned off. Push this button to the pushed-in positio
Resumen del contenido incluido en la página 10
Parts and their functions Accessory mounting section 1 2 : 1 < 5 6 3 4 6 8 7 ; 9 1Hooks for attaching shoulder strap 9Shoulder pad Attach the ends of the accessory shoulder strap to This pad can be adjusted to facilitate operation these hooks. when the unit is operated on the user’s shoulder. The pad position can be moved forward or 2Light shoe backward when the two securing screws are Use this to attach the video light, etc. loosened. 3Lens mount (Bayonet type) :Mounting hook for tape measure
Resumen del contenido incluido en la página 11
Parts and their functions Audio function section (1) 2 3 4 6 7 5 1 1MIC IN (microphone input) jack (XLR, 3-pin) 5AUDIO IN CH1/CH2 (audio input channel 1 & 2) Connect the microphone (optional accessory) here. connectors (XLR, 3-pin) The power for the microphone is supplied from this An audio component or microphones are connected jack. here. 2AUDIO LEVEL CH1/CH2 (audio channel 1 & 2 6LINE/MIC/+48V (line input/mic input/mic input + recording level adjustment) controls 48V) selector switch When the
Resumen del contenido incluido en la página 12
Parts and their functions Audio function section (2) =>
Resumen del contenido incluido en la página 13
Parts and their functions Viewfinder section 3TALLY switch > <7 8 9 This is used to control the front tally lamp 7. HIGH :The brightness of the front tally lamp is ; increased. = OFF : The front tally lamp is turned off. LOW :The brightness of the front tally lamp is 1 reduced. 4PEAKING control This is used to adjust the outlines of the images : ON seen inside the viewfinder to make focusing easier. 45 2 36 OFF Its adjustment does not affect the output signals of (Viewfinder pictured here is the
Resumen del contenido incluido en la página 14
Parts and their functions $ Examples of filter selection Shooting (recording)/playback function section (1) Shooting conditions CC filter ND filter Sunrise, sunset, inside a studio B (3200 K) 1 (CLEAR) Outdoors under a clear sky C (4300 K) or 2 (1/4 ND) or D (6300 K) 3 (1/16 ND) Outdoors under cloudy or rainy D (6300 K) 1 (CLEAR) or skies 2 (1/4 ND) Snowscapes, high mountains, C (4300 K) or 3 (1/16 ND) or seashores or other perfectly clear D (6300 K) 4 (1/64 ND) scenery 2 1 2Synchro scan adjus
Resumen del contenido incluido en la página 15
Parts and their functions AUTO KNEE function Shooting (recording)/playback If the level is adjusted to people or scenery for shooting when the function section (2) background is very bright, the background becomes subject to white-out, causing the buildings and scenery in the background to be blurred. When the AUTO KNEE function is activated in a situation like this, the background can be reproduced distinctly. This function is very effective for shooting in the following situations. OWhen shoo
Resumen del contenido incluido en la página 16
Parts and their functions Shooting (recording)/playback function section (3) 9 7 9 8 7SHUTTER switch 9HD SDI OUT connector (BNC) This is set to ON when the electronic shutter is to The HD SDI signals (video and audio) for the be used. When the SEL side is pressed, the monitor in accord with the position of the MONITOR shutter speed and mode display are changed in the OUT SDI switch : are output from here. range which was set ahead of time in the setting When the SDI switch is at “EE/PB,” the EE
Resumen del contenido incluido en la página 17
Parts and their functions ;CHARACTER switch Shooting (recording)/playback This controls whether the characters are to be function section (4) superimposed onto the pictures which are output from the HD SDI OUT connector. ON : The characters are superimposed. OFF: The characters are not superimposed.
Resumen del contenido incluido en la página 18
Parts and their functions Shooting (recording)/playback function section (5) C D @ A B > ? E >MODE CHECK button CPLAY/PAUSE button While this button is held down, the camera’s setting This is pressed to view the playback picture on the mode is shown in the viewfinder. viewfinder screen or using a color video monitor. This does not affect the output signals of the The button’s lamp comes on during playback. camera. When it is pressed during playback, the unit is set to pause in the playback mode
Resumen del contenido incluido en la página 19
Parts and their functions Warning/status display section 4 1 2 3 5 1Back tally lamp (unit) When the back tally switch 2 is set to ON, this lamp serves the same function as the front tally lamp in the viewfinder. 2Back tally switch This is used to control the unit’s back tally lamp 1. ON : The unit’s back tally lamp is operational. OFF: The unit’s back tally lamp is not operational. 3WARNING lamp When a problem of some form or other occurs within the VTR unit, this lamp flashes or lights. 4LIGHT
Resumen del contenido incluido en la página 20
Parts and their functions Menu operation section 3JOG dial button When this dial button is turned while the menu screen is displayed, the cursor is moved to each of the setting items. The menu items are set by operating this dial button. There are two types of menus, MAIN and SUB, and each menu is displayed on a page-by-page basis. The menu configuration can be changed to suit the desired objective. For details on the menu operation method, refer to “Menu operations” on pages 84 to 86. Time code
