Manual de instrucciones de Marcum Technologies VS500

Resumen del contenido incluido en la página 1

SPECIFICATIONS
BATTERY CHARGING
Recharging the battery after every use is recommended. As a general rule of thumb,
charge the battery for twice the amount of time as it was used.The VS 500 BATTERY: 12 volt DC, 7 Amp hr.
underwater viewing system has a DC charging port located just above the battery
CHARGER: 12 volt DC, 500 mA
door on the right side of the monitor face.The charger that was supplied with the VS
500 system is a 500 mA DC charger with a male jack.To charge your system, simply CAME

Resumen del contenido incluido en la página 2

INTRODUCTION GETTING STARTED Thank you for purchasing the VS 500 underwater viewing system from MarCum Technologies. Remove your VS 500 monitor from the Soft Pack by first opening the front of the case. This is Battery Status accomplished by pulling the flap at the top and sides of the Soft Pack until the Velcro strips The condition of charge remaining in your battery can be monitored by depressing the key Welcome to the world of underwater viewing. MarCum Technologies has incorporated the l