Resumen del contenido incluido en la página 1
1
Resumen del contenido incluido en la página 2
Trademarks & Copyright Windows 95/98/ME and Windows NT/2000/XP are registered trademarks of Microsoft Corp. All other brands and product names are trademarks of their respective companies. No part of this publication may be reproduced in any form or by any means or used to make any derivative (such as translation, transformation or adaptation) without the express written consent of the manufacturer as stipulated by the United States Copyright Act of 1976. FCC Certifications This equipmen
Resumen del contenido incluido en la página 3
HAWKING LIMITED WARRANTY Hawking Technology guarantees that every HNC300 Network Camera and every HNC320G Wireless-G Network Camera is free from physical defects in material and workmanship under normal use for (1) year from the date of purchase. If the product proves defective during this one-year warranty period, call Hawking Customer Service in order to obtain a Return Authorization number. Warranty is for repair or replacement only. Hawking Technology does not issue any refunds. BE S
Resumen del contenido incluido en la página 4
About This User’s Manual 6 Introduction 7 System Requirements 8 Features and Benefits 9 Physical Description 10 HNC300 Front Panel 10 Power LED 10 Link LED 10 Rear Panel 11 Network Cable Connector 11 DC Power Connector 11 Reset Button 11
Resumen del contenido incluido en la página 5
System Administration 22 HNC300 22 HNC320G 22 HNC300 System Administration: Management 22 System Administration: Configuration 25 System Administration: Tools 35 System Administration: Help 38 HNC320G System Administration: Management 39 System Administration: Configuration 42 System Administration: Tools 55
Resumen del contenido incluido en la página 6
This user’s manual gives a full explanation of the HNC300 (Wired) Network Camera and HNC320G Wireless-G Network Camera, including a description of features, installation procedures, web configuration, and other functions. Also included in the user’s manual are the operating procedures for the IPView SE application. 6
Resumen del contenido incluido en la página 7
Thank you for purchasing either the HNC300 Network Camera or the HNC320G Wireless-G Network Camera. The HNC300 connects directly to an Ethernet or Fast Ethernet network. The HNC320G can also connect directly to an Ethernet or Fast Ethernet network, but also supports the IEEE 802.11b/g wireless standard. The HNC300 Series (the collective title for the HNC300 & HNC320G models) network cameras are different from conventional PC cameras in that they are standalone systems with built-in CPUs
Resumen del contenido incluido en la página 8
HNC300 & HNC320G Network: Local Area Network (HNC300 & HNC320G): 10Base-T Ethernet or 100Base TX Fast Ethernet Wireless Local Area Network (HNC320G): IEEE 802.11b/g Wireless LAN \ Recommended PC or Notebook to Access the HNC300 & HNC320G: For Web Browser Users Operating System: Microsoft Windows 98SE/ME/2000/XP CPU: Pentium II, 266 MHz or above Memory Size: 32 MB (64 MB recommended) VGA card resolution: 800x600 or above Internet Explorer 5.0 or above (ActiveX & JAVA Mode – Ima
Resumen del contenido incluido en la página 9
This section describes the features and benefits of the HNC300 Network Camera & HNC320G Wireless-G Network Camera. Simple to Use The HNC300 and HNC320G are standalone systems with built-in CPUs, and thus, require no special hardware or software such as PC frame grabber cards. The HNC300 and HNC320G support both ActiveX mode for Internet Explorer and Java mode for Internet Explorer and Netscape Navigator. Therefore, all that is required is web browser software such as Internet Explorer 5.0
Resumen del contenido incluido en la página 10
HNC300 This section describes the externally visible features of the HNC300. Front Panel Link LED Power LED Power LED The “Power” LED is located to the right of the camera’s lens (when facing the camera). A steady blue light confirms that the camera is powered on. Note: The “Power” LED has three settings with which to control the light illumination while monitoring: Normal / Off / Dummy. Please refer to the “Web Configuration” section for detailed information and usage. Link LED
Resumen del contenido incluido en la página 11
Rear Panel 10/100 Ethernet DC Power Reset Connector DC 5V Reset Button Ethernet Cable Port Network Cable Connector The rear panel of the network camera features an RJ-45 connector for 10Base-T Ethernet or 100Base-TX Fast Ethernet connections (using Category 5 twisted-pair cabling). The port supports the N-Way protocol and the “Auto-MDIX” function, thereby allowing the network camera to automatically detect or negotiate the transmission speed of the network. DC Power Connector The DC po
Resumen del contenido incluido en la página 12
Top Panel Screw Hole Located on the top panel of the network camera, the screw hole is used to connect the camera stand onto the camera by attaching the screw head on the camera stand into the screw hole of the camera. Bottom Panel Screw Hole Screw Hole Located on the bottom panel of the network camera, the screw hole is used to connect the camera stand onto the camera by attaching the screw head on the camera stand into the screw hole of the camera. 12
Resumen del contenido incluido en la página 13
HNC320G This section describes the externally visible features of the HNC320G. Front Panel Link LED Power LED Power LED The “Power” LED is located to the right of the camera’s lens (when facing the camera). A steady blue light confirms that the camera is powered on. Note: The “Power” LED has three settings with which to control the light illumination while monitoring: Normal / Off / Dummy. Please refer to the “Web Configuration” section for detailed information and usage. Link LED
Resumen del contenido incluido en la página 14
Rear Panel 10/100 Ethernet ANT DC Power Reset Connector DC 5V Reset Button Network Cable Connector Antenna Connector Network Cable Connector The rear panel of the wireless network camera features an RJ-45 connector for 10Base-T Ethernet or 100Base-TX Fast Ethernet connections (using Category 5 twisted-pair cabling). The port supports the N-Way protocol and the “Auto- MDIX” function, thereby allowing the wireless network camera to automatically detect or negotiate the transmission speed o
Resumen del contenido incluido en la página 15
Top Panel Screw Hole Screw Hole Located on the top panel of the wireless camera, the screw hole is used to connect the camera stand onto the camera by attaching the screw head on the camera stand into the screw hole of the wireless camera. Bottom Panel Screw Hole Screw Hole Located on the bottom panel of the wireless camera, the screw hole is used to connect the camera stand onto the camera by attaching the screw head on the camera stand into the screw hole of the wireless camera. 15
Resumen del contenido incluido en la página 16
Unpack and Inspect Open the package and carefully remove all items. The complete HNC300 package consists of: One HNC300 (Wired) Network Camera One Installation CD-ROM One Quick Installation Guide One DC power adapter One Camera Stand One RJ-45 Ethernet Cable One Hosted Video Management Datasheet The complete HNC320G package consists of: One HNC320G Wireless Network Camera One External Wireless Antenna One Installation CD-ROM One Quick Installation Guide One DC power
Resumen del contenido incluido en la página 17
This section describes the hardware installation procedures for the HNC300 and HNC320G. HNC300 Connect an Ethernet Cable Connect an Ethernet cable to the Ethernet cable port located on the rear panel of the camera, and attach the other end to the network. 10/100 Ethernet Reset DC 5V Attach the External Power Supply Attach the external power supply to the DC power input connector located on the rear panel of the camera. The input connector is labeled “DC 5V”. Connect it to your local powe
Resumen del contenido incluido en la página 18
HNC320G Attach Wireless Antenna On the rear panel of the wireless camera, screw into the antenna connector the single external antenna that was included in the product packaging. Connect an Ethernet Cable Connect an Ethernet cable to the Ethernet cable port located on the rear panel of the camera, and attach the other end to the network. 18
Resumen del contenido incluido en la página 19
Attach the External Power Supply Attach the external power supply to the DC power input connector located on the rear panel of the camera. The input connector is labeled “DC 5V”. Connect it to your local power supply. Note: Confirm that the device is receiving power by making sure that the “Power” LED is illuminated. Please Note: Once you have configured your HNC320G camera so that it is connected to your existing wireless network (i.e. you have configured it with all the correct wireles
Resumen del contenido incluido en la página 20
To ensure the highest security and prevent unauthorized usage of the HNC300 or HNC320G, the network administrator has an exclusive privilege to access the cameras’ System Administration to change settings and control requirements that allow entry and authorized privileges for all users. The HNC300 and HNC320G support multi-level password protection. Access to the cameras is restricted to defined users only, who have a "User Name" and "User Password" that has been assigned by the administr
