Resumen del contenido incluido en la página 1
Preparing the camera
Before your operation
Shooting images
Using the shooting
function
Using the viewing
function
Changing your setup
Viewing images on a
computer
Printing images
Additional information on this product and
Digital Single Lens Reflex Camera
answers to frequently asked questions can be
Instruction Manual
found at our Customer Support Website.
DSLR-A300/A350
Printed using VOC (Volatile Organic
Compound)-free vegetable oil based ink.
© 2008 Sony Corporation
DSLR-A300/A350 4-133
Resumen del contenido incluido en la página 2
Owner’s Record The model and serial numbers are located on the bottom. Record the serial number in the space provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product. Model No. DSLR-A300/A350 Serial No. __________________________ WARNING To reduce fire or shock hazard, do not expose the unit to rain or moisture. For Customers in the U.S.A. This symbol is intended to alert the user to the presence of uninsulated “dangerous voltage” within the p
Resumen del contenido incluido en la página 3
IMPORTANT SAFEGUARDS For your protection, please read these Attachments safety instructions completely before Do not use attachments not recommended operating the appliance, and keep this by the manufacturer, as they may cause manual for future reference. hazards. Carefully observe all warnings, precautions Cleaning and instructions on the appliance, or the Unplug the set from the wall outlet before one described in the operating instructions cleaning or polishing it. Do not use liquid
Resumen del contenido incluido en la página 4
– Never block the slots and openings by Refer all servicing to qualified service placing the set on a bed, sofa, rug, or personnel. other similar surface. – Never place the set in a confined space, Replacement parts such as a bookcase, or built-in cabinet, When replacement parts are required, be unless proper ventilation is provided. sure the service technician has used – Do not place the set near or over a replacement parts specified by the radiator or heat register, or where it is manufact
Resumen del contenido incluido en la página 5
Read this first CAUTION For Customers in the U.S.A. Replace the battery with the specified type If you have any questions about this only. Otherwise, fire or injury may result. product, you may call: Do not expose the batteries to excessive Sony Customer Information Services heat such as sunshine, fire or the like. Center 1-800-222-SONY (7669) The number below is for the FCC related For Customers in the U.S.A. matters only. and Canada Regulatory Information RECYCLING LITHIUM-ION Declaratio
Resumen del contenido incluido en la página 6
CAUTION For Customers in Europe You are cautioned that any changes or modifications not expressly approved in This product has been tested and found this manual could void your authority to compliant with the limits set out in the operate this equipment. EMC Directive for using connection cables shorter than 3 meters (9.8 feet). Note: This equipment has been tested and found Attention to comply with the limits for a Class B The electromagnetic fields at the specific digital device, purs
Resumen del contenido incluido en la página 7
Disposal of waste batteries Notice for customers in the (applicable in the European Union United Kingdom and other European countries with separate collection systems) A moulded plug complying with BS 1363 is fitted to this equipment for your safety and convenience. Should the fuse in the plug supplied need to be replaced, a fuse of the same rating as the supplied one and approved by ASTA or BSI to BS 1362, (i.e., marked with an or This symbol on the battery or on the mark) must be
Resumen del contenido incluido en la página 8
Notes on using your camera effect by using the “Pixel mapping” Shooting procedure function (page 154). � This camera has two modes for shooting: the Live view mode using the LCD monitor, and the viewfinder mode using the viewfinder (OVF). � There may be differences between an image recorded in Live view mode and an image recorded in viewfinder mode, Black, white, red, such as exposure, white balance, or D- blue and green range optimizer, depending on the points method used of metering
Resumen del contenido incluido en la página 9
Table of Contents IMPORTANT SAFEGUARDS ........................................ 3 Read this first ..................................................................... 5 Notes on using your camera .............................................. 8 Preparing the Checking the accessories supplied ..................................13 camera Preparing the battery pack ............................................... 14 Attaching a lens ............................................................... 19
Resumen del contenido incluido en la página 10
Shooting an image the way you want it (Exposure mode) ..................................................................................... 56 Shooting with program auto .................................. 57 Shooting by controlling the blur of the background (Aperture priority) ............................................. 59 Shooting a moving subject with various expressions (Shutter speed priority) ..................................... 61 Shooting with the exposure adjusted manually (Ma
Resumen del contenido incluido en la página 11
Selecting the method for measuring the brightness of a subject (Metering mode) ................................... 89 Setting ISO ...................................................................... 90 Adjusting the color tones (White balance) ...................... 91 Adjusting the white balance to suit a specific light source (Auto/Preset white balance) .............................. 91 Setting the color temperature and a filter effect (Color Temperature/Color filter) ....................
Resumen del contenido incluido en la página 12
Copying images to your computer ................................ 127 Viewing images Viewing images on your computer ................................ 131 on a computer Using the software ......................................................... 135 Printing images Specifying DPOF ........................................................... 141 Printing images by connecting the camera to a PictBridge compliant printer ...................................................... 143 Specifications .....
Resumen del contenido incluido en la página 13
Preparing the camera Preparing the camera Checking the accessories supplied The number in parentheses indicates the number of pieces. � BC-VM10 Battery charger (1)/ � Eyecup (1) (Attached on the Power cord (mains lead) (1) camera) � CD-ROM (Application Software for α camera) (1) � Quick Start Guide (1) � Instruction Manual (This manual) � Rechargeable battery pack NP- (1) FM500H (1) � USB cable (1) � Video cable (1) � Shoulder strap (1) � Eyepiece cover (1) � Body cap (1) (Attached on the ca
Resumen del contenido incluido en la página 14
Preparing the battery pack When using the camera for the first time, be sure to charge the NP- FM500H “InfoLITHIUM” battery pack (supplied). Charging the battery pack The “InfoLITHIUM” battery pack can be charged even when it has not been fully depleted. It can also be used when it has not been fully charged. 1 Insert the battery pack on the battery charger. Push the battery pack until it clicks. 2 Connect the power cord (mains lead). Light on: Charging Light off: Normal charge completed One
Resumen del contenido incluido en la página 15
Preparing the camera � We recommend charging the battery pack in an ambient temperature of between 10 to 30°C (50 to 86°F). You may not be able to efficiently charge the battery pack outside of this temperature range. Notes � Connect the battery charger to an easily accessible wall outlet (wall socket) close by. � Even if the CHARGE lamp is not lit, the battery charger is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet (wall socket). If some tr
Resumen del contenido incluido en la página 16
Inserting the charged battery pack 1 While sliding the battery cover open lever, open the battery cover. 2 Firmly insert the battery pack all the way while pressing the lock lever with the tip of the battery. Lock lever 3 Close the battery cover. To remove the battery pack Turn off the camera and slide the lock lever in the direction of the arrow. Be careful not to drop the battery pack. Lock lever 16
Resumen del contenido incluido en la página 17
Preparing the camera To remove the battery cover The battery cover can be removed to attach a vertical grip (not supplied). To remove the cover, push the lever in the direction of the arrow and slide it out. To attach the cover, put the knob in the hole, pull down the lever, and slide it in. To check the remaining battery level Set the POWER switch to ON and check the level on the LCD monitor. The level is indicated with the percent figures, in addition to the following indicators. “Batter
Resumen del contenido incluido en la página 18
Effective use of the battery pack � Battery performance decreases in low temperature surroundings. So, the time that the battery pack can be used is shorter in cold places. We recommend the following to ensure longer battery pack use: put the battery pack in a pocket close to your body to warm it up, and insert it in your camera immediately before you start shooting. � The battery pack will run out quickly if you use the flash frequently. Battery life � The battery life is limited. Battery c
Resumen del contenido incluido en la página 19
Preparing the camera Attaching a lens 1 Remove the body cap from the camera and the rear cap from the lens. Body cap Rear cap 2 Mount the lens by aligning the orange index marks on the lens and camera. Orange index marks 3 Turn the lens clockwise until it clicks into the locked position. Notes � When attaching a lens, do not press the lens release button. � Do not use force when attaching a lens. Lens hood Using a lens hood is recommended to prevent unnecessary light from affecting your im
Resumen del contenido incluido en la página 20
To remove the lens 1 Press the lens release button all the way in and turn the lens counterclockwise until it stops. � When changing the lens, quickly change the lens away from dusty locations so as to keep dust from Lens release button getting inside the camera. 2 Replace the cap on the lens and attach the body cap to the camera. � Before you attach the cap, remove dust from the cap. Note on changing the lens When changing the lens, if dust or debris gets inside the camera and lands on
