Resumen del contenido incluido en la página 1
MODEL
AR-650
DIGITAL COPYING MACHINE
OPERATION MANUAL
Resumen del contenido incluido en la página 2
➢➣➣➢➣➢➣➢➣➢➢➣➢➣➢➣➢➣ ❧❧❧❧❧❧❧❧❧❧❧❧❧❧ ❧ ❧❧❧❧❧❧❧❧❧❧❧❧❧❧❧❧❧❧❧❧❧❧❧❧❧❧❧❧❧❧❧❧❧❧❧❧❧❧❧❧❧❧❧❧❧❧❧ ❧ ❧ The power switch positions are marked “ ” to indicate power “ON” and “ ” to indicate stand-by. In the stand-by position, power is being supplied to a drying heater within the optical system of the copier. Caution: For complete electrical disconnection, pull out the main plug. The socket-outlet shall be installed near the equipment and shall be easily accessible. ❧ ❧❧❧ ❧❧❧❧❧❧❧❧❧❧❧❧❧❧❧❧❧❧❧❧❧❧❧❧❧❧❧❧❧❧❧❧❧❧❧❧❧❧❧❧❧
Resumen del contenido incluido en la página 3
FCC NOTICE This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Opera
Resumen del contenido incluido en la página 4
EPA ENERGY STAR ® (MFD) EPA ENERGY STAR Program- The United States Environmental Protection Agency (EPA) has introduced a voluntary program, the ENERGY STAR Program, to enourage the widespread and voluntary use of energy-efficient technologies that enhance the workplace, improve product performance and prevent pollution. As an ENERGY STAR Partner, the Sharp Corp. has determined that this copier model meets the ENERGY STAR guidelines for energy efficiency. ENERGY STAR guidelines for this class of
Resumen del contenido incluido en la página 5
PREFACE Thank you for purchasing the Sharp Digital Copier AR-650. This Operator’s Manual describes the following: • how to use the digital copier • how to make copies • how to inspect and carry out maintenance on the digital copier • how to remedy mechanical and copying problems. Before using the digital copier, thoroughly read and understand this Operator’s Manual. To ensure that clean copies are made at all times and to make sure that the digital copier is in optimum working order, keep this O
Resumen del contenido incluido en la página 6
PREFACE Features of the AR-650 copier The copier is a plain paper digital copier. The copier scans originals and stores the resulting data in its memory as digital images. The copier allows you not only to process and edit these digital image data, but also enables copies to be sorted and grouped quietly, quickly and easily. The copier incorporates a large-size display with a touch panel and menu buttons that graphically represent copier functions. As a result, anybody can make clear-looking cop
Resumen del contenido incluido en la página 7
TABLE OF CONTENTS PREFACE .................................................................................................................... 1 TABLE OF CONTENTS ............................................................................................. 3 PRECAUTIONS .......................................................................................................... 5 1. INSTALLATION ..................................................................................................
Resumen del contenido incluido en la página 8
TABLE OF CONTENTS (Cont.) USING THE SPECIAL FUNCTIONS....................................................................... 93 1. ACCOUNT NUMBER.......................................................................................................... 94 2. JOB MEMORY .................................................................................................................... 95 3. WEEKLY TIMER.............................................................................................
Resumen del contenido incluido en la página 9
PRECAUTIONS 1. INSTALLATION The copier should be installed by a qualified service technician. Note: The packing material should be disposed of properly. 1 To obtain the best possible results, this copier should be used in conjunction with a dedicated AC power line at the following ratings: 2 115V–60 Hz, 16 A Notes: 1. The use of other appliances or other equipment on the same line as this copier may adversely affect performance and copy quality. 2. Be sure to use a 3-conductor, grounded wall ou
Resumen del contenido incluido en la página 10
PRECAUTIONS (Cont.) 2. GENERAL PRECAUTIONS Handle and use the copier gently and carefully. . Do not place anything on the paper cassettes or the original feed tray. 1 . Never allow the power cable to be trampled on or pinched between hard objects, otherwise an accident or electrical trouble might occur. . Do not allow any metal items such as paper clips to fall into the copier. Be sure to turn OFF the power switch (unless using the automatic timer mode): . When you leave your office at night. 2
Resumen del contenido incluido en la página 11
DESCRIPTION OF THE DIGITAL COPIER 7 DESCRIPTION OF THE DIGITAL COPIER
Resumen del contenido incluido en la página 12
PRODUCT IS TO C ER CT OIM FIP ED Y WITH DHHS BY THE MRULE 21 ANUFACTU CR FE RR SUBCHAPTERL J APPLICABLE AT THE DATE OF MANUFACTURE. JS MANUFACTURED : Y CLASS 1 LASER PRODUCT A LA PS PE AR R EK IL L A A 'S S LA ES 1 ER DE DLASSE 1 1. NAMES OF MAIN COMPONENTS Automatic document feeder (ADF) Original scale Glass Control panel Toner hopper lid Left-hand front Operator's manual door pocket (back side) Sheet bypass Power switch Cassette
Resumen del contenido incluido en la página 13
2. DESCRIPTION OF OPTIONAL EQUIPMENT 2 1 1. Finisher (AR-FN8, AR-FN9) The finisher allows SORT, GROUP, STAPLE copying, MAGAZINE SORT, MAGAZINE SORT & SADDLE STITCH, SADDLE STITCH and HOLE PUNCH as well as NON-SORT copying. 2. Hole Punching Unit The hole punching unit is the option for the finishers. * The saddle stitching function is available when the AR-FN9 is installed. 9 DESCRIPTION OF THE DIGITAL COPIER
Resumen del contenido incluido en la página 14
3. DESCRIPTION OF THE CONTROL PANEL Clip tray ENERGY SAVER key PRINTER/NETWORK key Put any paper clips re- When you are not using If you have an optional moved from the originals the copier for a fairly long printer installed, press here. period of time, press this this key to access the key. The copier enters the printer function. INTERRUPT key energy-saving mode, and When you want to make COPY key all display lamps go out. a copy of a different ori- If you have an optional To resume
Resumen del contenido incluido en la página 15
OPERATION GUIDE key DIGITAL keys START key Pressing the HELP key Use these keys to enter Press this key to start displays the appropriate the desired copy quantity. copying. operation procedure. You can set up to 999
CLEAR key Pressing this key after a copies. Use this key to correct the function has been set ALL CLEAR key entered copy quantity. displays the features When you press this key, available. all the modes you have MESSAGE display selected are cleared to the Displays the
Resumen del contenido incluido en la página 16
3. DESCRIPTION OF THE CONTROL PANEL (Cont.) The Message Display panel shows operation status,error messages and function menus. Each function item displayed is shown in the form of a touch key.You can select the function . by touching the key lightly with your finger. Touching one of the function items will show the next display. . The function items shown on the right can be selected directly on the Message Display panel. * The brightness of the touch panel can be adjusted with the touch panel
Resumen del contenido incluido en la página 17
4. DESCRIPTION OF THE GRAPHIC DISPLAY The graphic display shows the status of the copier. When one of the graphic symbols flashes, take the appropriate action referring to the page shown. 13 DESCRIPTION OF THE DIGITAL COPIER
Resumen del contenido incluido en la página 18
4. DESCRIPTION OF THE GRAPHIC DISPLAY (Cont.) SADDLE STITCHER JAM BYPASS MISFEED Symbol symbol This symbol flashes when This symbol flashes when paper is misfed in the no paper is fed into the saddle stitcher. (See page copier in bypass copying. 152.) Remove and reset the sheets on the sheet CLEAR PAPER symbol bypass. (See page 146.) This symbol flashes when CLEAR PAPER symbol paper is misfed in the automatic duplexer. (See This symbol flashes when page 141~144.) a sheet of paper fed fr
Resumen del contenido incluido en la página 19
HOW TO MAKE COPIES 15 HOW TO MAKE COPIES
Resumen del contenido incluido en la página 20
1. TURNING ON THE POWER SWITCH / AUTO JOB START Turning ON the Power Switch Turn ON the power switch. 1 The message “Wait Warming Up” appears. . Wait until the copier becomes ready. 2 About 7 minutes later, the message “READY” appears. 3 . This message indicates that you can make copies at any time. 16
