Resumen del contenido incluido en la página 1
Important Maintenance &
Setup & Connections Operation Useful Features Appendix
Information Troubleshooting
OPERATION MANUAL
MODEL
-
XG NV7XU
DIGITAL MULTIMEDIA
PROJECTOR
Resumen del contenido incluido en la página 2
Before using the projector, please read this operation manual carefully. OPERATION MANUAL ENGLISH IMPORTANT For your assistance in reporting the loss or theft of your - Model No.: XG NV7XU projector, please record the Serial Number located on the bottom of the projector and retain this information. Serial No.: Before recycling the packaging, please be sure that you have checked the contents of the carton thoroughly against the list of “Supplied Accessories” on page 10. There are two important re
Resumen del contenido incluido en la página 3
Important Information IMPORTANT SAFEGUARDS Electrical energy can perform many useful functions. This product has been engineered and manufactured to ensure your personal safety. But IMPROPER USE CAN RESULT IN POTENTIAL ELECTRICAL SHOCK OR FIRE HAZARD. In order not to defeat the safeguards incorporated into this Projector, observe the following basic rules for its installation, use and servicing. For your own protection and reliable usage of your projector, please be sure to read these “IMPORTANT
Resumen del contenido incluido en la página 4
Outstanding Features 1. DIRECT DIGITAL COMPUTER INPUT (PanelLink™) Signals remain digital from the source device to the projector thus resulting in sharper, clearer, noiseless and adjustment-free computer images. X 2. ADVANCED COMPATIBILITY WITH HIGH-END WORKSTATIONS AND PCS L H Compatible with up to 200 Hz vertical refresh rate, Sync on Green and Composite Sync signals for use with a wide variety of high-end PCs and Workstations. (Page 11) 3. FOR USE WITH DTV*/HDTV Allows projection of DTV imag
Resumen del contenido incluido en la página 5
Important Maintenance & Setup & Connections Operation Useful Features Appendix Information Troubleshooting Contents Important Information Useful Features IMPORTANT SAFEGUARDS …………………… 2 Freeze Function …………………………………… 33 Outstanding Features …………………………… 3 Digital Image Magnification (ENLARGE) ……… 34 Contents …………………………………………… 4 Gamma Correction ……………………………… 35 Usage Guidelines ………………………………… 5 Selecting the Picture Display Mode …………… 36 How to Access the PDF Operation Manuals Black Screen Function
Resumen del contenido incluido en la página 6
Usage Guidelines "COMPLIES WITH 21 CFR SUBCHAPTER J" SHARP ELECTRONICS CORPORATION Cautions Concerning the Laser Pointer CAUTION SHARP PLAZA, MAHWAH, NEW JERSEY 07430 TEL : 1-800-BE-SHARP U.S.A. ONLY LASER RADIATION- REMOTE CONTROL DO NOT STARE INTO BEAM The laser pointer on the remote control emits a laser beam from the laser MODEL NO. : RRMCG1530CESA WAVE LENGTH : 650nm DC3V (1.5VX2PCS.) MAX. OUTPUT : 1mW MADE IN CHINA pointer window. This is a Class II laser which may impair your sight if dir
Resumen del contenido incluido en la página 7
Important Information How to Access the PDF Operation Manuals (for Windows and Macintosh) PDF operation manuals in several languages are included in the CD-ROM. To utilize these manuals, you need to install Adobe Acrobat Reader on your PC (Windows or Macintosh). If you have not installed Acrobat Reader yet, you can download it from the Internet (http://www.adobe.com) or install it from the CD-ROM. To Install Acrobat Reader (English version) from the CD-ROM For Windows: For Macintosh: 1 Insert th
Resumen del contenido incluido en la página 8
Part Names Numbers next to the part names refer to the main pages in this manual where the topic is explained. Projector Front and Top View LAMP REPLACEMENT MUTE button 17 47 indicator TEMPERATURE WARNING POWER indicator 16 47 indicator 16 POWER buttons (ON/OFF) VOLUME buttons (/) 17 17 KEYSTONE button 19 MENU button 23 IrCOM button INPUT button 17 25 AUTO SYNC button FREEZE button 33 29 ENLARGE button RESIZE button 34 36 UNDO button GAMMA button 19 35 ADJUSTMENT buttons 23 23 ENTER button (∂/
Resumen del contenido incluido en la página 9
Important Information Part Names Remote Control Front View Rear View MUTE button 17 POWER buttons 16 VOLUME buttons 17 (ON/OFF) (/) 17 LEFT-CLICK/ 19 UNDO 19 22 KEYSTONE/BLACK LASER POINTER/ 22 button SCREEN button MENU button 37 23 MOUSE/ RIGHT-CLICK/ 22 22 ADJUSTMENT ENTER button 23 23 buttons (∂/ƒ/ß/©) INPUT button IrCOM button 17 25 FREEZE button AUTO SYNC button 33 29 ENLARGE button RESIZE button 34 36 TOOLS button GAMMA button 44 35 MOUSE/ BACKLIGHT button ADJUSTMENT 21 22 switch Top Vie
Resumen del contenido incluido en la página 10
Setup & Connections E-9 Setup & Connections
Resumen del contenido incluido en la página 11
Setup & Connections Supplied Accessories Remote control RRMCG1530CESA Power cord Two AA size batteries QACCU5013CEZZ Mouse control Computer cable Computer audio cable serial cable QCNW-5304CEZZ QCNW-4870CEZZ QCNW-5112CEZZ Mouse control Mouse control cable cable for IBM PS/2 for Mac DIN-D-sub RS-232C cable QCNW-5113CEZZ QCNW-5114CEZZ QCNW-5288CEZZ Remote mouse receiver Carrying bag RUNTK0661CEZZ GCASN0003CESA Lens cap Lens cap strap GCOVH1308CESA UBNDT0012CEZZ CD-ROM Sharp Advanced Presentation U
Resumen del contenido incluido en la página 12
Connecting the Projector Connecting the Power Cord Plug the supplied power cord into the AC socket on the back of the projector. Power cord QACCU5013CEZZ Connecting the Projector to a Computer You can connect your projector to a computer for projection of full color computer images. To a computer using the standard 15-pin (VGA) input Computer cable QCNW-5304CEZZ Computer audio cable QCNW-4870CEZZ 1 Connect one end of the supplied computer cable to the INPUT 1 port on the projector. 2 Connect the
Resumen del contenido incluido en la página 13
Setup & Connections Connecting the Projector Connecting other compatible computers When connecting the projector to a compatible computer other than an IBM-PC (VGA/SVGA/XGA/SXGA/UXGA) or Macintosh (i.e. Workstation), a separate cable may be needed. Please contact your dealer for more information. When connecting this projector to a computer, select “Computer/RGB” for “Signal Type” on the GUI menu. (See page 40.) • Connecting computers other than the recommended types may result in damage to the
Resumen del contenido incluido en la página 14
Connecting the Projector Connecting the Projector to Video Equipment You can connect your projector to a VCR, laser disc player, DVD player, DTV decoder and other audiovisual equipment. CAUTION • Always turn off the projector while connecting to video equipment, in order to protect both the projector and the equipment being connected. To a video source (VCR, laser disc player, DTV decoder or DVD player) using the standard video input 1 Connect the yellow RCA connectors to the corresponding yello
Resumen del contenido incluido en la página 15
Setup & Connections Connecting the Projector Connecting RS-232C Port When the RS-232C port on the projector is connected to a computer with an RS-232C cable (cross type, sold separately), the computer can be used to control the projector and check the status of the projector. See pages 53 and 54 for details. Computer cable QCNW-5304CEZZ DIN-D-sub RS-232C cable QCNW-5288CEZZ Computer audio cable QCNW-4870CEZZ 1 Connect the supplied DIN-D-sub RS-232C cable to the RS-232C port on the projector. 2 C
Resumen del contenido incluido en la página 16
Connecting the Projector Connecting the Remote Mouse Receiver • You can use the remote control as a remote mouse. • When the RS-232C port on the projector is connected to a computer with an RS-232C cable (cross type, sold separately), the computer can be used to control the projector and check the status of the projector. See pages 53 and 54 for details. IBM or IBM compatible PC 1 Connect one end of the supplied mouse control cable to the corresponding terminal on the PC. 2 Connect the other end
Resumen del contenido incluido en la página 17
Operation Operation Basic Operations 1 Make the necessary connections before pro- ceeding. Connect the power cord to a wall outlet. The POWER indicator lights up red and the projector enters standby mode. 2 Press Power ON. 2 • The flashing green LAMP REPLACEMENT indicator shows that the lamp is warming up. Wait until the indicator stops flashing before operating the projector. • If the power is turned off and then immediately turned on again, it may take a short while before the lamp turns on. •
Resumen del contenido incluido en la página 18
Basic Operations 3 Rotate the focus ring until the image on the screen becomes clear. 4 3 4 Rotate the zoom ring. The image can be adjusted to the desired size within the zoom range. 6 7 8 5 5 Press INPUT to select the desired input mode. EXAMPLE Press INPUT again to change the mode. 5 INPUT 1 Mode • When no signal is being received, “NO SIGNAL” will be displayed. When a signal that the projector is not preset to receive is being received, “NOT REG.” will be displayed. f INPUT 2 Mode f VIDEO Mod
Resumen del contenido incluido en la página 19
Operation Setting up the Screen Position the projector perpendicular to the screen with all feet flat and level to achieve an optimal image. Move the projector forward or backward if the edges of the image are distorted. • The projector lens should be centered in the middle of the screen. If the lens center is not perpendicular to the screen, the image will be distorted, making viewing difficult. • Position the screen so that it is not in direct sunlight or room light. Light falling directly ont
Resumen del contenido incluido en la página 20
Setting up the Screen Using the Adjustment Feet There are two front adjustment feet and a rear adjustment foot. To lower the position of the picture, pull out the folded leg of the rear adjustment foot. See the diagram shown below for using the front adjustment feet. 1 2 3 Press foot releases. Adjust height of projector Rotate feet to make minor and remove hands from foot changes. releases. • The projector is adjustable up to approximately 5° from the standard position. • When the height of the
