Resumen del contenido incluido en la página 1
Philips Hospitality TV
Installation Manual for
22HFL3233D/10
26HFL3233D/10
32HFL3233D/10
42HFL3233D/10
Version 1.0
Resumen del contenido incluido en la página 2
Contents 1. Requirements before starting the installation .......................................................................................................... 2 2. Find out the state of the TV ...................................................................................................................................... 3 3. Re-install TV ............................................................................................................................................
Resumen del contenido incluido en la página 3
1. Requirements before starting the installation Before starting the installation, make sure that you have everything you need at hand. Master remote control 22AV8573 or Guest remote control 22AV1104B And USB stick You will need the master remote control or the guest remote control to access the menus. To access the setup menu press the ‘RC5 SETUP’ key, and then press the ‘Home/Menu’ button. For the guest remote control, press the following keys sequential: 3,
Resumen del contenido incluido en la página 4
2. Find out the state of the TV It is important to know if a TV is in ‘virgin mode’ (out of the box) or installed before. If you can see this screen below, you know that the TV is in ‘virgin mode’ and you can install the set. See chapter 4 of this manual. If you power on the set and then press the ‘Home’ button on the guest remote, you will see this screen appear, if the TV already has been installed or the wizard was already skipped. PBS mode on PBS mode off You can start
Resumen del contenido incluido en la página 5
3. Re-install TV If you want to start an installation from scratch you can always re-install the TV. This can be done by using the option: Re-install TV set. If PBS is active you can access the setup menu press the ‘RC5 SETUP’ key, and then press the ‘Home/Menu’ button (For the guest remote control, press the following keys in sequence: 3,1,9,7,5,3, ‘MUTE’) , then go to Consumer Setup, confirm with “OK”. This menu will appear Select “Guest Menu” and press “OK” Select the option TV set
Resumen del contenido incluido en la página 6
Navigate to “Reinstall TV” Press “OK” to reinstall TV set. If all is correct select “YES” and press “OK”. After this operation the TV will power off and on and display the installation wizard. Note: All settings are at default values and no channel plan is available. After reinstalling, the PBS Setup menu will keep the PBS Mode, Room ID and PBS Setup menu and reset all other parameters to default values. 5
Resumen del contenido incluido en la página 7
4. Installation wizard. When you turn on the TV for the first time, or you have reinstalled the TV, you should see the following screen. Here you will need to select your preferred language. After this, you will need to select the country. Depending on the country selection, some pre-defined settings will be activated. Note: If you are experiencing some issues after selecting your country, please select ‘Others’ in the menu. The next step is to select ‘Wall mounted’ or ‘On a T
Resumen del contenido incluido en la página 8
The next step is to choose between ‘Shop’ and Home’ use. If you select “SHOP” an ‘e-sticker’ banner will be displayed on the TV. This is for commercial purpose only. Now you can select the visual and hearing impaired options. If you select ‘On’, your TV will automatically turn on settings to help visual and hearing impaired people. THE MOST COMMON OPTION IS TO TURN THIS FUNCTION OFF. On the following page we can start the channel installation wizard. You can also press “Back”
Resumen del contenido incluido en la página 9
For the channel installations, select ‘Install TV channels’ and press ‘OK’ Then you can select ‘Continue’ and press ‘OK’ again. Here you can select the type of channels you would like to install. 1. Antenna (DVB-T) + analogue channels 2. Cable (DVB-C)+ analogue channels Note: The installation wizard is identical for DVB-T and DVB-C. Note: The analogue channels can be skipped in a future step. 8
Resumen del contenido incluido en la página 10
It is advisable to check the settings before starting the search. The first option in the settings page is the “Frequency scan”. This has 2 options: - “Quick”: this is a fast method to search channels but it might skip some channels (depending on the network). - “Full”: the scan will search on all frequencies and will store all channels available. This is the safe method if you don’t know the network parameters, but it takes the longest time. The second option in the setti
Resumen del contenido incluido en la página 11
The last option is “Reset” and this will reset the search settings to default. After you have checked or changed settings, you can select “Done” and select “Start” to start the channel search. During the channel search you can see the progress bar and how many channels are found at that time. When the search is done, you should see “Channel search complete” and a summary of the channels found. In this case: Digital channels found: 53 Analogue channels found: 0 Press “OK
Resumen del contenido incluido en la página 12
A wizard will start to guide you through the process of setting the sound and picture on the TV set. Select “Continue” to start the wizard and press “OK” on remote control. The wizard will ask you some questions about which image you prefer, select the option you desire and press “OK” on the remote control. Once this wizard is done, you will return to the installation menu again. The last option in this menu is “Add your devices”. This can be done if you would like to add a DVD
Resumen del contenido incluido en la página 13
5. Channel options a. Reordering channels Check if PBS Menu is active. Press “Home” button to see the guest menu. If the menu is displayed with “Add new device” and “Help”, the PBS Menu is not active. If the menu is displayed without “Add new device” and “Help”, the PBS Menu is active and TV menu has restrictions. Also in the Guest menu are options that will not be displayed if PBS Menu is active. The PBS menu can be accessed by using Yellow remote (RC 22AV8573 Master Remote con
Resumen del contenido incluido en la página 14
The PBS menu will appear like in picture. Using the arrow keys you can navigate through this MENU. To disable PBS mode use arrow keys to select the “OFF” option and confirm with “OK”. The previous menu will be active, use left arrow to go the base menu of the PBS menu. Go to “Store” option down the bottom of the menu and press “OK”. 13
Resumen del contenido incluido en la página 15
When you press “OK” the next image will appear and you will have to confirm. After the confirmation the TV will restart. After power on all PBS settings will be disabled. This menu will allow you to set up channels, reinstall channels, change picture settings, add new devices. As you can see in the picture you have two new sections: “Add new device ” and “Help ”. Press “OK” button on remote control for the channel grid. All installed channels are available on this menu. With the
Resumen del contenido incluido en la página 16
Select “Reorder” and Press “OK” button on the remote control to reorder channels. Navigate to the channel that you want to move and Press “OK” on the remote control to select that channel. The arrows around the channel indicate that the channel is selected and can be moved. Use arrow keys to move the channel to the new position. When you reached the new position press “OK” on the remote control to confirm the new position of the channels. 15
Resumen del contenido incluido en la página 17
When you are finished with the re-ordering press “Options” on the remote control again. Press “OK” on the remote control to confirm that you are done with the re-ordering. b. Rename channels Select the channel, press the “Options” button on the remote control and select “Rename” to change name of a channel. If you then press the “OK” button a virtual QWERTY keyboard will pop up. c. Hide channels Important: You cannot delete channels from the channel grid, but you can use the optio
Resumen del contenido incluido en la página 18
6. PBS Mode [Off]: The TV operates as a basic (consumer) TV. [On]: All settings in the PBS mode Setup menu are active. Only by switching on this mode the TV acts as a Hospitality TV. Sets the room ID. Room ID can be used to distinguish between different floors/rooms/setups when using SmartInstall. A shortcut to enter the consumer installation menu. Consumer installation menu should be accessed to change e.g. picture and sound settings and update channels. Using thi
Resumen del contenido incluido en la página 19
When the TV is switched on it will start up on the specified source/channel. Available EXT1, EXT2, VGA, HDMI, HDMI side, AV side or one of the installed TV channels. When the TV is switched on it will start up on the specified volume level. Selectable value from 00 until 60. This specifies the maximum allowable volume level of the TV. Selectable value from 00 until 60. When the TV is switched on it will start up on the specified picture format. Selectable values: A
Resumen del contenido incluido en la página 20
[On] To enable the welcome message. [Off] No welcome message Line 1: First line of welcome message. Line 2: Second line of welcome message. Clear: Will delete the message enter on welcome message. When pressing “OK” button on remote control while editing line 1 or 2, a virtual keyboard will pop up on screen. Maximum 20 characters per line. Sets the period of time to display the welcome message on the screen when TV is turned on from standby. Selectable values: 20, 25, 30 s
