Resumen del contenido incluido en la página 1
OWNER'S MANUAL
71CM CORDLESS REMOTE COLOUR TELEVISION
MODEL: 7128
Type Tested
Electrical
Safety
AS/NZS 3250 Lic 4163
Standards Australia
APP No: N15957
PALSONIC CORPORATION PTY LTD
1 JOYNTON AVENUE
WATERLOO NSW 2017 AUSTRALIA
TEL:(02)9313 7111
FAX:(02)9313 7555
www.palsonic.com.au
PALSONIC CUSTOMER SERVICE
TELEPHONE
AUSTRALIA:1300 657 888
Resumen del contenido incluido en la página 2
Congratulations on your purchase of this Palsonic colour television receiver We recommend that you thoroughly read this manual before use to fully enjoy the many functions and excellent effects of this receiver. Retain is manual in an easily accessible location for future reference. Contents Main features Notes for operation ............................................................................................... 2 Cautions for safety .......................................................
Resumen del contenido incluido en la página 3
Main features . Hyperband . Auto/manual search . 100 preset channels . TV system: PAL-BG, NTSC 3.58/4.43(AV) . Full function remote control . English on screen menu display . No-signal blue background display and AUTO-POWER-OFF function . Four picture mode settings . Sound mute function . Sleep timer . AV IN/OUT, S-VHS operation function 2
Resumen del contenido incluido en la página 4
NOTES FOR OPERATION * Do not let the TV set be in standby condition for a long period of time. When it is not in use, please turn off the power supply and remove the power plug. When it is to be left for a prolonged period of time, it is recommended to disconnect the connection to the outdoor aerial, to avoid thunder strike. * Please follow cautions for safety in the TV set instructions, and all warnings and descriptions denoted on the TV set. Cautions For Safety Note: This TV set c
Resumen del contenido incluido en la página 5
Installation and appearance Antenna connection To ensure a bright-coloured and clear picture, you should use an outdoor aerial or CATV cable. If the signals are strong enough, you may use an indoor aerial. Note: In case of using the Twin-lead aerial feeder (300 ) for UHF/VHF aerial, use a 300-75 ohm adaptor (not supplied) When using the coaxial cable (not supplied) (75 ) for UHF/VHF aerial, connect the plug into the 75 ohm aerial socket directly. Note: When you connect the outdoor aerial cab
Resumen del contenido incluido en la página 6
Appearance Front view OWER SWITCH PUSH MENU AV/TV MENU VOLUME DOWN CHANNEL UP VOLUME UP CHANNEL DOWN Note: Functions of MENU, VOL , CH and AV/TV are also provided to remote controller. Back view 5
Resumen del contenido incluido en la página 7
The remote controller Standby Sound mute TV/AV select Previous channel On screen recall Channel direct select Colour system select Picture control Sleep timer Picture mode selection Volume control *Sound system select Channel select * NOTE: this TV model's RF sound system is BG only. Therefore the SYS1/2 button on the remote controller is ineffective in sound system selection. Similarly in the Preset and Function menus the SYS item (sound system selection item) is ineffective. 6
Resumen del contenido incluido en la página 8
Operation Turning the power on/off 1. Connect the power, push the main power switch, the red indicator is on, the set is in standby mode. 2. Push the button on the remote controller to turn on the set when the set is in standby, this time, the green indicator is on, on the upper right corner of the screen will display channel number, colour and sound system. Or you can push the CH button to turn on the set when in standby. 3. You can push the button to switch the set to st
Resumen del contenido incluido en la página 9
1. PICTURE menu Making use of the PICTURE menu can adjust the picture effect according to your personal preference and it will be stored as picture memory mode automatically. Press the CH button to select the item (the selected item is highlighted in red). Press the VOL button to adjust it. The range is 0-63. Press the MENU button to exit to the main menu. Below are the characteristics of the picture adjustment item. OSD 0 63 Green bar moving Pressing VOL VOL Item (BRIGHTNES
Resumen del contenido incluido en la página 10
2. PRESET menu PROG 28 SYS 1 SKIP OFF AUTO AFT ON SEARCH BAND U MANUAL lllllllllll.......... Making use of the PRESET menu can fulfil the function of auto-search, search. manual search , channel and band selection. AFT and skip on/off. Press CH button to select the item. (the selected item is highlighted in red). Press the MENU button to exit to the main menu. 1) PROG (program) Select the current program number while "PROG" is hi
Resumen del contenido incluido en la página 11
5) SYS ( sound system ) This item is used to select sound system. Since this TV model’s RF sound system is B/G only, this item gets into ineffectiveness in sound system selection. 6) Auto - search (AUTO) Press CH button to highlight AUTO. Press VOL button the set will automatically search and store the active TV signals in your local area from lower band to higher band in the sequence of VL VH U with the green bar moving rightward. When a station is located, the set w
Resumen del contenido incluido en la página 12
3. FUNCTION menu STD AUTO SYS 1 BLUE ON Making use of the FUNCTION menu can select BLUE ON/OFF and current channel’s colour and sound system. Press CH button to select item (the selected item is highlighted). Press MENU button to exit to the main menu. 1) STD (colour system) selection. In this TV model the colour system is automatically identified. In normal circumstances, please set colour system to AUTO. 2) SYS (sound system) selection. In this TV
Resumen del contenido incluido en la página 13
2. Using CH button Press CH button, the channel number will be increased or decreased progressively. 3. Making use of button Press button to swap the currently viewed channel with the previous channel. 1 20 AUTO AUTO SYS 1 SYS 1 Press Picture and volume adjustment 1. Picture adjustment Press PIC button repeatedly, on-screen display will change in the sequence below BRIGHTNESS CONTRAST COLOUR SHARPNESS PAL BRIGHTNESS CONTRAST COLOUR TINT SHARPNESS NTSC Press VOL
Resumen del contenido incluido en la página 14
2. Volume adjustment You can press the VOL button to adjust the volume, and the green bar will move rightward or leftward, the volume output range is 0-63. Press VOL VOLUME 15 VOLUME 30 llllll...... llllll...... Press VOL You can press the button to mute the sound. Press the button again or VOL button. The sound is restored to normal. SOUND MUTE MODE NORMAL SOUND MODE Press Press Press VOL VOLUME 30 llllll......
Resumen del contenido incluido en la página 15
Other functions 1. Retain on-screen display + Press the button and the upper right corner will display the current channel number and TV system. After 4 seconds the display on the screen will disappear. 2 AUTO After 4 + Press SYS 1 seconds In VIDEO mode, it will only display VIDEO l (or VIDEO 2) and the colour system. 2. STD button Press the STD button and each time the colour system displayed on the screen will change in the sequence of AUTO PAL N358 N443 In this TV model the colour sy
Resumen del contenido incluido en la página 16
the screen displays AV1 and colour system; Press the button again and the set will be switched to AV2, the screen displays AV2 and colour system. Press the button once more, the set will be switched to TV mode and the screen displays current TV channel. AV1 12 AV2 AUTO AUTO After 4 AUTO seconds Press AV Press AV Press AV Note: S-VHS IN and AV2 use the same interface. If you want to receive signals input through S-VHS terminal, switch the set to AV2, the S-VHS (S-VIDEO) input terminal has prio
Resumen del contenido incluido en la página 17
External equipment connection This set is incorporated with Audio & Video input and output terminals which allows direct connection to external equipments (such as VCR, Video DISC, VCD, Satellite Receiver etc.) for playing back and recording the programs. 1. Video playback If your video equipment has a S-VHS output terminal, connect it to the S-VHS input terminal (special S-VIDEO type) of the set and connect audio line to AV2 AUDIO IN terminal. If not, connect it to the VIDEO terminal (photo t
Resumen del contenido incluido en la página 18
2. Recording 2.1 According to the following figure connect the TV set to the VCR. (Y) YELLOW (VIDEO) (W) WHITE (AUDIO, L/MONO) (R) (AUDIO, R) 2.2 When recording, set the TV on the desired channel, the program recorded is the program displayed on the screen. 17
Resumen del contenido incluido en la página 19
Troubleshooting Guide . Before calling service personnel, please check the following chart for a possible cause to the trouble you are experiencing. Symptoms Check the following items No power, red indicator is not lit up . Be sure the power cord is plugged in. . Contrast, colour, tint are not correctly Poor Colour, poor tint adjusted . Possible interferences of automobiles, Spots appear on the screen motorcycle, trolley bus, neon lamps, etc. . Possible interference of electronic interference
Resumen del contenido incluido en la página 20
PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL:(02)9313 7111 FAX:(02)9313 7555 www.palsonic.com.au PALSONIC CUSTOMER SERVICE TELEPHONE AUSTRALIA: 1300 657 888 604-29A03-00
