Resumen del contenido incluido en la página 1
Contents
Safety precautions 2
Preparation 2
COLOUR TELEVISION
...
1 Insert the batteries into the remote control 2
...
2 Connecting the aerial and external devices 3
........................
INSTRUCTIONS 3 Connecting the power cord 4
4 SETUP TOUR .............................................. 5
Thank you for buying this JVC
Basic operation 6
colour television.
Remote control buttons and functions 7
To make sure you understand how to
.....................................
ECO SENSOR button 7
use y
Resumen del contenido incluido en la página 2
Safety precautions WARNING TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION TO ENSURE PERSONAL SAFETY, OBSERVE THE FOLLOWING RULES REGARDING THE USE OF THIS TV. • Operate only from the power source specified on the TV. • Avoid damaging the power cord and mains plug. When you unplug the TV, pull it out by the mains plug. Do not pull on the power cord. • Never block or cover the cabinet openings for ventilation. Never install the TV 15 cm where good ventil
Resumen del contenido incluido en la página 3
Preparation 2 Connecting the aerial and external devices •For further details, refer to the manuals provided with the devices you are connecting. • Connecting cables are not supplied. • The front and rear AUDIO/VIDEO input jacks are directly connected so that input to either jack is output through both. You cannot provide input to both the front and rear jacks at the same time. Disconnect one input, or use one of the jacks as an output jack only (for monitoring or recording). ■ Connecting the ae
Resumen del contenido incluido en la página 4
Preparation ■ Connecting other external devices To audio To video output output VIDEO AUDIO VCR (for playing) IN OUT VCR (for recording) To audio To video input input To video Camcorder output or To audio TV game output VIDEO AUDIO MENU IN Headphones • Use the headphones with a stereo mini jack (3.5 mm in diameter). When you connect the headphones, the TV speakers go off. 3 Connecting the power cord Connect the power cord to the AC outlet. Operate only from the power source indicated on the
Resumen del contenido incluido en la página 5
Preparation 4 SETUP TOUR When the TV is first turned on, it enters the SETUP TOUR mode, and the JVC logo is displayed. Follow the instructions on the on-screen display to perform the SETUP TOUR. • In case of resetting that the reason for such as removal, you can set the AUTO CH PRESET function on the “MENU 3” menu. For details, see page 13. 1 Press the Main power button on the TV. The POWER lamp lights. After the ON TIMER POWER JVC logo has been displayed, the TV automatically switches to the la
Resumen del contenido incluido en la página 6
Basic operation 1 Press the POWER button to turn RM-C365GY your TV on. • If your TV does not turn on, press the Main power button on the TV then press the POWER button again. ECO POWER SENSOR •You can also turn on your TV by pressing SYSTEM PICTURE any of the following buttons; COLOUR SOUND MODE - the CHANNEL m button TV/VIDEO 12 3 - the Number buttons I/II 45 6 - the TV/VIDEO button OFF 78 9 TIMER 2 Select a channel. CHANNEL RETURN+ - -- 0 / SCAN ■ Press the CHANNEL m button. • Up/down selec
Resumen del contenido incluido en la página 7
Remote control buttons and functions ECO SENSOR button COLOUR SYSTEM button You can adjust this TV so that the screen If the picture is not clear or no colour automatically adjusts to the optimum appears, change the current colour contrast according to the brightness of system to another colour system. your room. This function reduces eye Press this button to select the colour strain and the power consumption of system. this TV. In TV mode (channel 1 to 99 and AV): Press this button to select th
Resumen del contenido incluido en la página 8
Remote control buttons and functions DISPLAY button CHANNEL SCAN button You can continuously display the current You can quickly view all TV channels channel number or VIDEO mode on the programmes that you can view on your screen. TV, and search for the programme you want to view. Press this button. 1 Press this button to start scanning To turn the display off, press this button TV channels. again. The TV channel programmes are each • When selecting a channel or VIDEO mode displayed for several
Resumen del contenido incluido en la página 9
Remote control buttons and functions RETURN + button PICTURE MODE button You can set a channel you frequently You can select one of three picture view to the Return Channel and you adjustment settings as you like. can view that channel at any time with Press this button to select a mode. one-touch. BRIGHT: To set the channel to the Return Heightens contrast and sharpness. Channel: STANDARD: 1 Select the channel you want to set Standardizes picture adjustments. to the Return Channel. SOFT: 2 Pres
Resumen del contenido incluido en la página 10
Using the TV’s menus This TV has a number of functions you can operate using the menus. To use all your TV’s functions fully, you need to understand how to use the menus. 3 Repeatedly press the MENU T buttons to select CHANNEL RETURN+ a desired function. - -- SCAN 0 / DISPLAY MUTING DISPLAY button 4 Press the MENU M buttons to MENU / MENU change function settings. MENU –/+ buttons buttons CHANNEL VOLUME Example: Changes the AUTO SHUTOFF setting. REMOTE CONRTOL UNIT MENU
Resumen del contenido incluido en la página 11
Using the TV’s menus INPUT ON TIMER You can view images from VCRs or other Your TV will automatically turn on and devices connected to your TV. tune into the channel you set after the period of time you set. 1 Press MENU T to display the “MENU 1” menu, then select 1 Press MENU T to display the “INPUT”. “MENU 1” menu, then select “ON TIMER”. MENU 1 INPUT TV MENU 1 ON TIMER INPUT TV PR 1 0:00 Channel ON TIMER VNR
Resumen del contenido incluido en la página 12
Using the TV’s menus AUTO SHUTOFF BLUE BACK You can set your TV to turn off if no If no signal is being received or the signals are received for about 15 minutes signal is very weak, a blue screen or longer after the end of a broadcast. automatically becomes the picture background. 1 Press MENU T to display the If you wish to continue viewing the “MENU 2” menu, then select poor picture, you must set the BLUE “AUTO SHUTOFF”. BACK function to “OFF”. MENU 2 AUTO SHUTOFF ON
Resumen del contenido incluido en la página 13
Using the TV’s menus AUTO CH PRESET SETUP TOUR You can automatically preset all TV You can start the SETUP TOUR function. channels that can be received by your 1 Press MENU T to display the TV to channels. “MENU 3” menu, then select 1 Press MENU T to display the “SETUP TOUR”. “MENU 3” menu, then select MENU 3 AUTO CH PRESET “AUTO CH PRESET”. MANUAL CH PRESET SETUP TOUR MENU 3 LANGUAGE ENGLISH AUTO CH PRESET MANUAL CH PRESET
Resumen del contenido incluido en la página 14
Using the TV’s menus If the picture is not clear: MANUAL CH PRESET Fine-tune the TV channel. You can manually preset desired TV channels to desired channels. 1 Press MENU t to select “FINE”. MANUAL 1 Press MENU T to display the FINE “MENU 3” menu, then select SKIP NO SOUND SYSTEM B/G “MANUAL CH PRESET”. EXIT MENU 3 SELECT BY PR 3 VL AUTO CH PRESET PROGRAM BY -+ EXIT BY MANUAL CH PRESET FINE BY VOL-+ DISPLAY SETUP TOUR
Resumen del contenido incluido en la página 15
Using the TV’s menus SKIP Picture Adjustments You can set undesired channels to be You can adjust the picture as you like. skipped. Channels set to be skipped 1 Press MENU T to display the cannot be selected by the CHANNEL m “MENU 4” menu. buttons or the CHANNEL SCAN button. • Channels to which TV channels have not MENU 4 TINT been preset are automatically set to be COLOUR skipped. BRIGHT CONT. SHARP 1 Press MENU T to display the SELECT BY EXIT BY “MENU 3” menu, then select
Resumen del contenido incluido en la página 16
TV buttons and parts 1 2 3 4 5 67 8 9 0 ON TIMER POWER MENU CHANNEL VOLUME VIDEO AUDIO IN EXIT 1 Headphone jack 6 ECO sensor 2 VIDEO/AUDIO terminal 7 Remote control sensor 3 MENU button 8 ON TIMER lamp 4 CHANNEL m buttons 9 POWER lamp 5 VOLUME m buttons 0 Main power button 16 GGT0009-21W111-E604 16 01/01/2032, 00:12am
Resumen del contenido incluido en la página 17
Using the buttons on the TV Basic operation Operating menus Check to make sure the CHILD LOCK You can operate functions in menus function is set to “OFF”. When the using the front control buttons on the CHILD LOCK function is set to “ON”, TV. the TV cannot be operated using the front control buttons. For details, 1 Press MENU y to display a menu. see “CHILD LOCK” on page 12. 2 Press MENU y repeatedly to 1 Press CHANNEL M to turn the TV display the menu you want to use. on from standby mode. 3 Pr
Resumen del contenido incluido en la página 18
Troubleshooting If there is no picture or the TV does not operate normally, make sure the problem isn’t due to the reasons indicated below. If the problem persists even after taking the measures indicated, please contact a service technician. Cannot turn the TV on Poor picture •Press the Main power button on the TV. •Press the COLOUR SYSTEM button to select another colour system. (see page 7.) • Connect the power cord to the AC outlet. •Adjust the picture settings. (see page 15.) • Set the Pictu
Resumen del contenido incluido en la página 19
Specifications TV RF systems B, G, I, D, K Colour systems PAL, SECAM Channel and frequencies VHF low channel (VL) = 46.25 to 168.25 MHz VHF high channel (VH) = 175.25 to 463.25 MHz UHF channel (U) = 471.25 to 863.25 MHz Receives cable channels in mid band (X to Z, S1 to S10), super band (S11 to S20) and hyper band (S21 to S41). Power input AC110 to 240V, 50 / 60 Hz Power consumption Maximum 90 W, Average 60 W Screen size (measured diagonally) Picture tube 549 mm, Visible area 508 mm Audio output
Resumen del contenido incluido en la página 20
JVC SALES & SERVICE (THAILAND) CO., LTD Head Office & Service Center 10th Floor, Sino-Thai tower, 32/31 Asok Road, (Sukhumvit 21), Bangkok 10110 TEL: (02)-260-1249-51, (02)-260-1275-6 FAX: (02)-260-1274 Service Center Soi Sukhumvit 26 Branch, 108 Sukhumvit 26 (Soi Aree), Klongtoan, Klongtoey, Bangkok 10110 TEL: (02)-204-3004-11 FAX: (02)-204-3033 Norhtern Regional Service Center 3/11 Sam Lan Road (Nha Wat Prasing), Tambol Prasing, Amphur Muang, Chiang Mai 50000 TEL: (053)-281-441 ~ 2 FAX: (05
