Manual de instrucciones de Eiki LC-X7L

Resumen del contenido incluido en la página 1

Multimedia Projector
Quick Reference Guide
MODEL LC-X71
LC-X71L
I
Use this book as a reference guide when setting up the
projector. For detailed information about installation,
setup, and operation of the projector, refer to the owner's
manual on the CD-ROM.
READ THE SAFETY INSTRUCTIONS IN THE OWNER'S
MANUAL BEFOREUSINGTHE PROJECTOR.
Printed in Japan
Part No. 6103303871 (1AA6P1 P5214- KE6BI @2006 Eiki International. Inc.

Resumen del contenido incluido en la página 2

SETTING-UP PROJECTOR NAME OF EACH PART OF PROJECTOR CONNECTING AC POWER CORD FRONTOF CABINET "'1:1:1-1:4::1:1.." . ~ This projector uses nominal input voltages of 100-120 V or 200-240 V AC and it automatically selects correct input .., "", '... ~ voltage. It is designed to work with single-phase power systems having a grounded neutral conductor. To reduce risk of electrical shock, do not plug into any other type. of h. .Op"",,"c.,m / ~- power system. ill CAUTION ~ - --- . If you are not sure of

Resumen del contenido incluido en la página 3

MOVING PROJECTOR TERMINALS OF PROJECTOR Use the Carrying Handle when moving the projector This projector has input and output terminals on its back for connecting computers and video equipment Replace the lens cap and retract the ADJUSTABLE FEET when moving the projector to prevent damages to the lens COMPUTER INPUT/MONITOR COMPUTER INPUT COMPUTER AUDIO INPUT 11 and cabinet. TERMINAL (DIGITAL) OUTPUT TERMINAL (ANALOG) AUDIO MONITOR OUTPUT JACK Connect an audio This terminal is switchable and Whe

Resumen del contenido incluido en la página 4

REMOTE CONTROL OPERATION ".h'J.:tll...)~1 ~-". ""- Oper.tlng R.ng. Point the remote control toward LeltSide ~ ~ .~ ~':'I"I;OI~"'-"'on ~., ~~~ALt~~~t~~~ 1"- ~~fC~. I':' the projector la Receiver end I8SIl8 lhe 1ITI8Q8. piCture beamISemlnedfromthe a::.. 6-'" 1 oroft ' . . Used 10 turn the Window) when pressing any . LaserligtltW'tfIdoN. _ o\IJTOPCCIK'II":' . button. Ma)(imum operating !!!8 ! Lights green when dragged . . I ..fII&Zf 11);.0.) 1 II'Itoa blaCk wnage !i range for the remote control is

Resumen del contenido incluido en la página 5

] TURNING ON / OFF PROJECTOR TURNING ONTHE PROJECTOR TURNING OFFTHE PROJECTOR 1 Complete peripheral connections.(with a computer, 1 Press the POWER ON-OFF button on the top control or VCR, etc.) before turning on the proJector. on the remote control, and "Power off?" appears on the screen. 2 Connect the projector's AC power cord into an AC outlet. The LAMP indicator lights RED,and the READY 2 Press the POWER ON-OFF button again t? turn off the indicator lights GREEN. projector. The lAMP Indicato