Resumen del contenido incluido en la página 1
K61A_AA03447A_00Eng_cover 4/22/04 2:30 PM Page 3
TX-P2665W/TX-P2766
TX-P3066W/TX-P3266
TX-P2664W/TX-P2764
TX-P3064W/TX-P3264
COLOR TELEVISION
Owner’s
Instructions
Resumen del contenido incluido en la página 2
K61A_AA03447A_00Eng 4/22/04 2:23 PM Page 2 Important Warranty Information Regarding Television Format Viewing Standard screen format televisions (4:3, the aspect ratio of the screen width to height) are pri- marily designed to view standard format full-motion video. The images displayed on them should primarily be in the standard 4:3 ratio format and constantly moving. Displaying station- ary graphics and images on screen, such as the dark top and bottom letterbox bars (wide screen pictures),
Resumen del contenido incluido en la página 3
K61A_AA03447A_00Eng 4/22/04 2:23 PM Page 3 CONTENTS Chapter 1: Your New TV . . . . . . . . . . . . . . . . 5 List of Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Familiarizing Yourself with The TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Front Panel Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Resumen del contenido incluido en la página 4
K61A_AA03447A_00Eng 4/22/04 2:23 PM Page 4 CONTENTS Chapter 3: Operation (Cont.) . . . . . . . . . . . . 37 Customizing the Sound. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 Using Automatic Sound Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 Viewing an External Signal Source . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 Setting the Signal Source. . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 Assigning Names to Externa
Resumen del contenido incluido en la página 5
K61A_AA03447A_00Eng 4/22/04 2:23 PM Page 5 YOUR NEW TV Chapter One YOUR NEW TV List of Features Your TV was designed with the latest technology. This TV is a high-performance unit that includes the following special features: • Full Flat Screen • Automatic timer to turn the TV on and off • Adjustable picture and sound settings that can be stored in the TV’s memory • Automatic channel tuning for up to 181 channels • A special filter to reduce or eliminate reception problems • A built-in multi-
Resumen del contenido incluido en la página 6
K61A_AA03447A_00Eng 4/22/04 2:23 PM Page 6 YOUR NEW TV Familiarizing Yourself with The TV Front Panel Buttons The buttons on the front panel control your TV’s basic features, including the on-screen menu. To use the more advanced features, you must use the remote control. TX-P2664W/TX-P2764/TX-P3064W/TX-P3264 TX-P2665W TX-P2766/TX-P3066W/TX-P3266 Œ TV/VIDEO ˆ Remote Control Sensor Press to change between viewing TV programs Aim the remote control towards this spot on the and signals from othe
Resumen del contenido incluido en la página 7
K61A_AA03447A_00Eng 4/22/04 2:23 PM Page 7 YOUR NEW TV Side Panel Jacks You can use the side panel jacks to connect an A/V component that is used only occa- sionally, such as a camcorder or video game. (For information on connecting equipment, see page 20.) Œ AUDIO INPUT jacks ˇ SUPER VIDEO INPUT jack Used to connect the audio signals from a camcorder S-Video signal from an S-VHS VCR or DVD or video game. player. Note: In S-Video mode, Audio Output depends what ´ VIDEO INPUT jack kind of aud
Resumen del contenido incluido en la página 8
K61A_AA03447A_00Eng 4/22/04 2:23 PM Page 8 YOUR NEW TV Rear Panel Jacks Use the rear panel jacks to connect an A/V component that will be connected continuously, such as a VCR or a DVD player. Because there are three sets of input jacks, you can connect three different A/V components (i.e., a VCR and a DVD, 2 VCRs, etc.) For more information on connecting equipment, see pages 11 – 19. Œ AUDIO-VIDEO MONITOR ˆ DIGITAL INPUT OUTPUT jacks (Digital Visual Interface) jack These audio-video sig
Resumen del contenido incluido en la página 9
K61A_AA03447A_00Eng 4/22/04 2:23 PM Page 9 YOUR NEW TV Remote Control You can use the remote control up to about 23 feet from the TV. When using the remote, always point it directly at the TV. You can also use your remote control to operate your Set-Top Box, VCR, DVD and cable box. See page 63 for details. Œ POWER Ô MODE Turns the TV on and off. Selects a target device to be con- trolled by the Samsung remote con- ´ S.MODE trol (i.e., TV, Set Top Box, VCR, Cable Adjust the TV sound by selecti
Resumen del contenido incluido en la página 10
K61A_AA03447A_00Eng 4/22/04 2:23 PM Page 10 YOUR NEW TV Remote Control ¿ TV/COMPONENT ◊ STILL Press to switch the TV, COMPO- Press to stop the action during a NENT1, 2, or DVI mode particular scene. Press again to resume normal video. ¸ VCR(DVD, DVR Note: The still function doesn’t oper- or STB) Controls ate in Component 1, 2 or DVI mode. REW (Rewind) ± RESET Press to rewind a tape in your If your remote control is not func- VCR(DVD, DVR or STB). tioning properly, take out the batter- ies an
Resumen del contenido incluido en la página 11
K61A_AA03447A_00Eng 4/22/04 2:23 PM Page 11 INSTALLATION Chapter Two INSTALLATION Connecting VHF and UHF Antennas - If your antenna has a set of leads that look like this, see “Antennas with 300-ohm Flat Twin Leads” below. If your antenna has one lead that looks like this, see “Antennas with 75-ohm Round Leads” on next page. If you have two antennas, see “Separate VHF and UHF Antennas” on next page. Antennas with 300-ohm Flat Twin Leads If you are using an off-air antenna (such as a roo
Resumen del contenido incluido en la página 12
K61A_AA03447A_00Eng 4/22/04 2:23 PM Page 12 INSTALLATION Antennas with 75-ohm Round Leads 1 Plug the antenna lead into the VHF/UHF terminal on the bottom of the back panel. Separate VHF and UHF Antennas If you have two separate antennas for your TV (one VHF and one UHF), you must combine the two antenna signals before connecting the antennas to the TV. This procedure requires an optional combiner-adaptor (available at most electronics shops). 1 Connect both antenna leads to the combiner.
Resumen del contenido incluido en la página 13
K61A_AA03447A_00Eng 4/22/04 2:23 PM Page 13 INSTALLATION Connecting to a Cable Box that Descrambles All Channels This terminal might be labeled 1 “ANT OUT”, “VHF OUT” or simply, Find the cable that is con- “OUT”. nected to the ANTENNA OUT terminal on your cable box. 2 Connect the other end of this cable to the VHF/UHF antenna terminal on the back of the TV. Connecting to a Cable Box that Descrambles Some Channels If your cable box descrambles only some channels (such as premium channels),
Resumen del contenido incluido en la página 14
K61A_AA03447A_00Eng 4/22/04 2:23 PM Page 14 INSTALLATION 4 Connect a coaxial cable between the ANTENNA Incoming OUT terminal on the cable Cable box and the B–IN terminal Splitter RF (A/B) on the RF(A/B) switch. Switch Cable Box 5 Connect another cable between the other OUT ter- minal on the splitter and Incoming Cable the A–IN terminal on the Splitter RF (A/B) RF (A/B) switch. Switch Cable Box 6 Connect the last coaxial cable between the OUT terminal on the RF (A/B) Incoming Cable switch and
Resumen del contenido incluido en la página 15
K61A_AA03447A_00Eng 4/22/04 2:23 PM Page 15 INSTALLATION Connecting a VCR These instructions assume that you have already connected your TV to an antenna or a cable TV system (according to the instructions on pages 11-14). Skip step 1 if you have not yet connected to an antenna or a cable system. 1 Unplug the cable or antenna from the back of the TV. 2 VCR Rear Panel Connect the cable or antenna to the ANTENNA IN terminal on Incoming Cable or the back of the VCR. Antenna 3 VCR Rear Panel TV
Resumen del contenido incluido en la página 16
K61A_AA03447A_00Eng 4/22/04 2:23 PM Page 16 INSTALLATION Connecting an S-VHS VCR Your Samsung TV can be connected to an S-Video signal from an S-VHS VCR. (This connection delivers a better picture as compared to a standard VHS VCR.) 1 VCR Rear Panel TV Rear Panel To begin, follow steps 1–3 in the previous section to connect the antenna or cable to your VCR and your TV. Coaxial Cable 2 TV Rear Panel VCR Rear Panel Connect a set of audio cables between the AUDIO OUT jacks on the VCR and th
Resumen del contenido incluido en la página 17
K61A_AA03447A_00Eng 4/22/04 2:23 PM Page 17 INSTALLATION Connecting a Second VCR to Record from the TV Your TV can send out signals of its picture and sound to be recorded by a second VCR. To do this, connect your second VCR as follows: 1 TV Rear Panel VCR Input Panel Connect a set of audio cables between the AUDIO OUT jacks on the TV and the AUDIO IN Audio Cable jacks on the VCR. (The VCR input jacks might be either on the front or on back of the VCR.) 2 TV Rear Panel VCR Input Panel Connect
Resumen del contenido incluido en la página 18
K61A_AA03447A_00Eng 4/22/04 2:23 PM Page 18 INSTALLATION Connecting a Digital TV Set-Top Box (480p/1080i) Connecting to Y,PB,PR Connect the Y, PB, and PR video outputs of the set-top box to their corresponding inputs on the TV. Next, connect the Left and Right audio from the set-top box to the corre- sponding L and R terminals on the TV. (The connections for a typical set-top box are shown below.) 1 Set Top Box Rear Panel TV Rear Panel Connect a coaxial cable between the ANTENNA OUT terminal
Resumen del contenido incluido en la página 19
K61A_AA03447A_00Eng 4/22/04 2:23 PM Page 19 INSTALLATION Connecting to DVI (Digital Visual Interface) By inputting a high-bandwidth Digital Content Protection high-definition picture source to the DIGITAL INPUT jack on the TV, high-definition pictures can be displayed on the screen in their digital form. (This DIGITAL INPUT jack is for use in the future when High-bandwidth Digital Content Protection DTV decoders, DVD players and D-VHS are put on the market.) 1 Set Top Box Rear Panel TV Rear P
Resumen del contenido incluido en la página 20
K61A_AA03447A_00Eng 4/22/04 2:23 PM Page 20 INSTALLATION Connecting a Camcorder The side panel jacks on your TV make it easy to connect a camcorder to your TV. They allow you to view the camcorder tapes without using a VCR. (Also see “Viewing an External Signal Source” on page 39). 1 Locate the A/V output jacks on the camcorder. Camcorder Output Jacks They are usually found on the side or back of the camcorder. 2 TV Side Panel Camcorder Output Jacks Connect an audio cable between the AUDIO OU
