Manual de instrucciones de Philips SE655

Resumen del contenido incluido en la página 1

Register your product and get support at
www.philips.com/welcome
SE650
SE655
Quick start guide
Connect
1
Install
2
Enjoy
3

Resumen del contenido incluido en la página 2

What’s in the box Base station for SE650 OR Handset for SE650/SE655 Battery door SE655 with bracket 2 AAA rechargeable Power supply Line cord* batteries User manual Guarantee Quick Start Guide *You may find in the box the line adaptor delivered separately from the line cord. In this case, you have to connect the line adaptor to the line cord first before plugging the line cord to the line socket. In multihandset packs, you will find one or more additional handsets, battery doors, chargers wi

Resumen del contenido incluido en la página 3

Connect 1 Connect the base station 1. Place the base station in a central location near the telephone line socket and electricity socket. 2. Connect the line cord and the power cable to their corresponding connectors at the back of the base station. 3. Connect the other end of the line cord and power cable to their respective sockets. Install 2 Insert rechargeable batteries and charge Insert batteries Charge handset for 24 hours A B Configure your phone (if necessary) 1. Press o OK to display

Resumen del contenido incluido en la página 4

Enjoy 3 Make a call Dial the number (maximum 24 digits) and press t or l. OR Press t or l to take the line, and dial the number. Answer a call When the phone rings, press t or l. End a call To end a conversation, press h. Adjust earpiece or speaker volume During a call, scroll n to select from level 1 to level 5. Set the ring tone There are 15 ring tones available on your handset. 1. Press m, scroll n to Personal Set, and press o Select. 2. Scroll n to Handset Tones and press o Select, then scro

Resumen del contenido incluido en la página 5

Call from the phonebook 1. Press d in idle mode. 2. Scroll n to a phonebook entry. 3. Press t. • The call is initiated. Listen to messages recorded on the answering machine (for SE655 only) Press e on the base station to turn on the answering machine (the LED is turned on). The outgoing message is played. Press p on the base station to play phone messages (the first recorded message will be played first). Press f to skip the current message and play the next message. Press b to go back to the

Resumen del contenido incluido en la página 6

Troubleshooting For more information, please refer to the User Manual that came with your phone. Problem Solution � There’s no dialling tone! � No power: Check the connections. � Batteries are empty: Charge the batteries. � Move closer to the base station. � Wrong line cord used: Use the line cord provided. � Line adaptor may be required: If applicable, connect the line adaptor to the line cord. � Caller does not hear me � Move closer to the base station. clearly! � Move the base station at lea